AIR-AP1815T-Q-K9 Cisco Aironet 1815t Teleworker Access Point

AIR-AP1815T-Q-K9 Exact Teleworker Order

AIR-AP1815T-Q-K9 is Cisco's Q-domain Aironet 1815t controller-based 802.11ac Wave 2 order. The 1815t is designed for teleworker and micro-branch OfficeExtend use; it is not the wall-plate 1815w or the general indoor 1815i.

Remote-office network boundary

The AP supplies one Gigabit WAN/uplink interface and three local Gigabit Ethernet ports while its simultaneous dual-band 2x2 radios provide two spatial streams. Record the ISP handoff, addressing, tunnel/controller reachability and VLAN or policy assignment for each occupied local port.

Q-domain compliance evidence

The domain letter is an order-control token rather than a country name. Store the Q-domain compliance result with serial, site and antenna form so return or replacement activity remains traceable.

Organize the Q-domain evidence for return and replacement traceability. Preserve the original unit's PID, approval and site, then require the replacement label and controller country to be checked independently. Link both serials to the same service case without copying the old approval blindly. This makes regulatory identity visible during an RMA rather than only during initial purchase.

Q-domain field acceptance

For the Q-domain order, build an asset-return workflow linking serial, remote user, desk location, power adapter, WAN cable and controller object. Test factory reset and secure reassignment before the AP is issued to another destination.

Power and staging plan

The desktop-oriented unit can use its documented power path and integrated antennas. Stage controller reachability, software, regulatory country, WAN behavior and local ports at the corporate site before shipment, but repeat the WAN and compliance checks at the final destination.

Teleworker operations worksheet

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. For this Q-domain teleworker order, tie the result to the remote-user circuit, controller object and exact AP serial.

Serial-level asset control

Capture chassis serial, base MAC address, carton reference, deployment site, controller assignment and asset owner. Reconcile the identifiers against the purchase line before activation. Multi-unit cartons require an entry for every physical access point; a carton SKU alone cannot show which unit was installed, held as a spare or returned. This record is also needed to trace support entitlement, replacement history and monitoring ownership. For this Q-domain teleworker order, tie the result to the remote-user circuit, controller object and exact AP serial.

Controlled spare policy

If purchased as a spare, name the protected site population, compatible controller image, storage location, storage conditions and periodic power-on test. Confirm that regulatory token, antenna architecture and mounting parts match the population it protects. Set a final-use review date. A stored unit can become unsuitable while untouched because controller software, country approval, certificates or network architecture may change. For this Q-domain teleworker order, tie the result to the remote-user circuit, controller object and exact AP serial.

Authentication path test

Commission representative clients through association, authentication, address assignment, DNS and application reachability. Preserve the identity policy used, test client type, result and relevant controller logs. An access point that joins its controller has not yet demonstrated the user path. Repeat the test after any controller, certificate or authentication-service change and retain failures separately from RF or switch-port evidence. For this Q-domain teleworker order, tie the result to the remote-user circuit, controller object and exact AP serial.

Lifecycle decision

Cisco lists the Aironet 1815 family as end of sale, gives 30 April 2027 as the last support date and identifies Catalyst 9105AX as the migration family. Compare remote-site WAN behavior, controller architecture, wired-port needs, power and desk placement before choosing a replacement.

Official sources: Cisco Aironet 1815t data sheet, Cisco 1815t getting-started guide, Cisco 1815t teleworker deployment guide, Cisco 1815 lifecycle notice and Cisco compliance lookup.