ARUBA Q9H57A HPE 510 Series Campus Access Points
- 763 412 7282
- +86 010 69614620
Q9H57A Buying Guide
Q9H57A HPE Aruba Networking AP-514 (RW) Dual Radio 4x4/2x2 802.11ax AP is listed by YYST Global for buyers looking for ARUBA HPE 510 Series Campus Access Points. Q9H57A ARUBA wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support. The listed condition is New Factory Sealed. The reference price is US$ 495.00. Contact our sales team to confirm stock, lead time, warranty and configuration before ordering.
- Model: Q9H57A
- Brand: ARUBA
- Category: HPE Aruba 510 Series Campus Access Points
- Condition: New Factory Sealed
- Reference price: US$ 495.00
Q9H57A Overview
Q9H57A is a ARUBA wireless networking hardware listed by YYST Global for campus WLAN expansion, controller replacement, access point rollout and wireless refresh projects. This page is intended for buyers comparing replacement parts, project supply, spare inventory and quote options.
YYST Global helps enterprise customers confirm model information, product category, condition, availability and sourcing route before purchase. For time-sensitive projects, send the model number and required quantity so our sales team can check stock, lead time and compatible alternatives.
Product name: Q9H57A HPE Aruba Networking AP-514 (RW) Dual Radio 4x4/2x2 802.11ax AP. Category: HPE Aruba 510 Series Campus Access Points. Condition: New Factory Sealed.
Q9H57A Specification
| Datasheet series | HPE Aruba Access Points |
| Exact model | Q9H57A |
| Management check | Confirm Aruba Central, controller, AirWave or local management requirements |
| Official datasheet | HPE Aruba access points official product page |
| System Specifications | ||
| Hardware variants | • AP-514: External antenna models | |
| Wi-Fi Antennas | • AP-514: Four (female) RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3 for 5 GHz; 2.4 GHz radio uses A0/A1 and chains 0/1 only). Worst -case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.3 dB in 2.4 GHz and 1.7 dB in 5 GHz. | |
| Additional Interfaces | • E0: HPE Smart rate port (RJ-45, maximum negotiated speed 2.5 Gbps) − Auto-sensing link speed (100/1000/2500BASE-T) and MDI/ MDIX − 2.5 Gbps speeds comply with NBase-T and 802.3bz specifications − PoE-PD: 48 VDC (nominal) 802.3af/at/bt (class 3 or higher) − 802.3az Energy Efficient Ethernet (EEE) • E1: 10/100/1000BASE-T Ethernet network interface (RJ-45) − Auto-sensing link speed and MDI/MDIX − 802.3az Energy Efficient Ethernet (EEE) • Link Aggregation (LACP) support between both network ports for redundancy and increased capacity • DC power interface: 12 VDC (nominal, +/-5%), accepts 2.1 mm/5.5 mm center-positive circular plug with 9.5mm length • USB 2.0 host interface (Type A connector) − Capable of sourcing up to 1A/5W to an attached device • Bluetooth 5 and Zigbee (802.15.4) radio (2.4 GHz) − Bluetooth 5: up to 8 dBm transmit power (class 1) and -95 dBm receive sensitivity − Zigbee: up to 8 dBm transmit power and -97 dBm receive sensitivity − Integrated vertically polarized omnidirectional antenna with roughly 30° downtilt and peak gain of 3.5 dBi (AP-515) or 4.9 dBi (AP-514) • Visual indictors (two multi-color LEDs): for System and Radio status • Reset button: factory reset, LED mode control (normal/off) • Serial console interface (proprietary, micro-B USB physical jack) • Kensington security slot |
|
| Regulatory Model Numbers | • AP-514: APIN0514 | |
| Physical Specifications | ||
| Dimensions | unit, excluding mount bracket: − 200 mm (W) x 200 mm (D) x 46 mm (H)/7.9” (W) x 7.9” (D) x 1.8” (H) shipping − 230 mm (W) x 220 mm (D) x 72 mm (H)/9.1” (W) x 8.7” (D) x 2.8” (H) |
|
| Weight | Unit, including single-gang wall box mount plate: − 810g/28.5 oz Shipping: − 1010g/35.5 oz |
|
| Electrical Specifications | ||
| Maximum (Worst-Case) power consumption | − DC powered: 16.0W − PoE powered (802.3af, IPM enabled): 13.5W − PoE powered (802.3at/bt): 20.8W − idle mode: 11W (PoE or DC) − in deep-sleep mode: 1W (PoE or DC) Note • The AP supports direct DC power and Power over Ethernet (PoE; on port E0) • When both power sources are available, DC power takes priority over PoE • Power sources are sold separately; see the ordering Information section below for details • When powered by DC or 802.3at (class 4)/802.3bt (class 5) PoE, the access point will operate without restrictions. • When powered by 802.3af (class 3) PoE and with the IPM feature enabled, the access point will start up in unrestricted mode, but it may apply restrictions depending on the PoE budget and actual power. What IPM restrictions to apply, and in what order, is programmable. • Operating the access point with an 802.3af (class 3 or lower) PoE source and IPM disabled is not supported (except for AP staging; no radios will be enabled). • All numbers above are without an external USB device connected. When sourcing the full 5W power budget to such a device, the incremental (worst-case) power consumption for the access point is up to 6.5W. |
|
| Environmental Specifications | ||
| Operating temperature | − Temperature: 0° C to +50°C/+32°F to +122°F − Humidity: 5% to 93% non-condensing − AP is plenum rated for use in air-handling spaces − ETS 300 019 class 3.2 environments |
|
| Storage and transportation conditions | − Temperature: -40°C to +70°C/-40°F to +158°F − Humidity: 5% to 93% non-condensing − ETS 300 019 classes 1.2 and 2.3 environments |
|
| Reliability | Mean Time Between Failure (MTBF): 560,000 hrs (64 yrs) at +25°C operating temperature. | |
| Safety and Regulatory Certifications | ||
| Certifications | UL2043 plenum rating Wi-Fi Alliance: Wi-Fi Certified a, b, g, n, ac Wi-Fi Certified ax¹ WPA, WPA2 and WPA3 ? Enterprise, Personal WMM, WMM-PS, Wi-Fi Vantage, W-Fi Agile Multiband Wi-Fi Location² Passpoint (Release 2) Bluetooth SIG Ethernet Alliance (POE, PD device, class 4) |
|
| Regulatory Compliance | FCC/ISED • CE Marked • RED Directive 2014/53/EU • EMC Directive 2014/30/EU • Low Voltage Directive 2014/35/EU • UL/IEC/EN 62368-1 • EN 60601-1-1, EN60601-1-2 • Railway Certs (AP-515 Only): EN 50155:2017 — Railway Applications • EN 50121-1:2017 — Railway EMC − EN 50121-3-2 — Railway EMC − EN 50121-4:2016 — Railway Immunity − IEC 61373 ed2:2008 — Railway Shock and Vibration For more country-specific regulatory information and approvals, please see your HPE Aruba Networking representative. |
|
| Wi-Fi Radio Specifications | ||
| Access point type | Indoor, dual radio, 5 GHz 802.11ax 4x4 MIMO and 2.4 GHz 802.11ax 2x2 MIMO | |
| Software-Configurable dual radio | Supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1) • 5 GHz radio: − Four spatial streams Single User (SU) MIMO for up to 4.8 Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (max) − Two spatial streams Single User (SU) MIMO for up to 1.2 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical) − Four spatial streams Multi User (MU) MIMO for up to 4.8 Gbps wireless data rate to up to four 1SS or two 2SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (max) − Four spatial streams Multi User (MU) MIMO for up to 2.4 Gbps wireless data rate to up to four 1SS or two 2SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical) • 2.4 GHz radio: − Two spatial streams Single User (SU) MIMO for up to 574 Mbps wireless data rate to 2SS HE40 802.11ax client devices (max) − Two spatial streams Single User (SU) MIMO for up to 287 Mbps wireless data rate to 2SS HE20 802.11ax client devices (typical) |
|
| Support for client devices per radio |
Support for up to 512 associated client devices per radio, and up to 16 BSSIDs per radio | |
| Supported frequency bands (country-specific restrictions apply | − 2.400 to 2.4835 GHz ISM − 5.150 to 5.250 GHz U-NII-1 − 5.250 to 5.350 GHz U-NII-2A − 5.470 to 5.725 GHz U-NII-2C − 5.725 to 5.850 GHz U-NII-3/ISM |
|
| Available channels | Dependent on configured regulatory domain | |
| RF Spectrum | Dynamic Frequency Selection (DFS) optimizes the use of available RF spectrum Including Zero-Wait DFS (ZWDFS) to accelerate channel changes | |
| Supported radio technologies | − 802.11b: Direct-Sequence Spread-Spectrum (DSSS) − 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) − 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 16 resource units (for an 80 MHz channel) |
|
| Supported modulation types | − 802.11b: BPSK, QPSK, CCK − 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension) − 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension) − 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM − 802.11n high-throughput (HT) support: HT20/40 − 802.11ac very high throughput (VHT) support: VHT20/40/80/160 − 802.11ax high efficiency (HE) support: HE20/40/80/160 |
|
| Supported data rates (Mbps) | − 802.11b: 1, 2, 5.5, 11 − 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 − 802.11n (2.4 GHz): 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) − 802.11n (5 GHz): 6.5 to 600 (MCS0 to MVC31, HT20 to HT40) − 802.11ac: 6.5 to 3,467 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160) − 802.11ax (2.4 GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) − 802.11ax (5 GHz): 3.6 to 4,803 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160) • 802.11n/ac/ax packet aggregation: A-MPDU, A-MSDU |
|
| Additional Wi-Fi Features | Transmit power: Configurable in increments of 0.5 dBm • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): − 2.4 GHz band: +21 dBm (18 dBm per chain) − 5 GHz band: +24 dBm (18 dBm per chain) • Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks • Maximum Ratio Combining (MRC) for improved receiver performance • Cyclic Delay/Shift Diversity (CDD/CSD) for improved downlink RF performance • Space-Time Block Coding (STBC) for increased range and improved reception • Low-Density Parity Check (LDPC) for high-efficiency error correction and increased throughput • Transmit Beam-Forming (TxBF) for increased signal reliability and range • 802.11ax Target Wait Time (TWT) to support low-power client devices • 802.11mc Fine Timing Measurement (FTM) for precision distance ranging |
|
| RF Performance table | ||
| Specifications | Maximum transmit power (dBm) per transmit chain | Receiver sensitivity (dBm) per receive chain |
| 802.11b 2.4 GHz | ||
| 1 Mb/s | 18 | -96 |
| 11 Mb/s | 18 | -88 |
| 802.11g 2.4 GHz | ||
| 6 Mb/s | 18 | -93 |
| 54 Mb/s | 17 | -75 |
| 802.11n HT20 2.4 GHz | ||
| MCS0 | 18 | -93 |
| MCS7 | 16 | -75 |
| 802.11ax HE20 2.4 GHz | ||
| MCS0 | 18 | -92 |
| MCS11 | 14 | -62 |
| 802.11a 5 GHz | ||
| 6 Mb/s | 18 | -93 |
| 54 Mb/s | 17 | -75 |
| 802.11n HT20 5 GHz | ||
| MCS0 | 18 | -93 |
| MCS7 | 16 | -73 |
| 802.11n HT40 5 GHz | ||
| MCS0 | 18 | -90 |
| MCS7 | 16 | -70 |
| 802.11ac VHT20 5 GHzb | ||
| MCS0 | 18 | -93 |
| MCS9 | 16 | -68 |
| 802.11ac VHT40 5 GHz | ||
| MCS0 | 18 | -90 |
| MCS9 | 16 | -65 |
| 802.11ac VHT80 5 GHz | ||
| MCS0 | 18 | -87 |
| MCS9 | 16 | -62 |
| 802.11ac VHT160 5 GHz | ||
| MCS0 | 18 | -84 |
| MCS9 | 18 | -59 |
| 802.11ax HE20 5 GHz | ||
| MCS0 | 18 | -90 |
| MCS11 | 14 | -60 |
| 802.11ax HE40 5 GHz | ||
| MCS0 | 18 | -87 |
| MCS11 | 14 | -57 |
| 802.11ax HE80 5 GHz | ||
| MCS0 | 18 | -84 |
| MCS11 | 14 | -54 |
| 802.11ax HE160 5 GHz | ||
| MCS0 | 18 | -81 |
| MCS11 | 13 | -51 |
Q9H57A Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
Q9H57A FAQ
What is Q9H57A?
Q9H57A HPE Aruba Networking AP-514 (RW) Dual Radio 4x4/2x2 802.11ax AP is a ARUBA HPE 510 Series Campus Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What are the physical specifications of Q9H57A?
For Q9H57A, the manufacturer specification lists dimensions as unit, excluding mount bracket: − 200 mm (W) x 200 mm (D) x 46 mm (H)/7.9” (W) x 7.9” (D) x 1.8” (H) shipping − 230 mm (W) x 220 mm (D) x 72 mm (H)/9.1” (W) x 8.7” (D) x 2.8” (H).
What is the operating temperature of Q9H57A?
For Q9H57A, the manufacturer specification lists operating temperature as − Temperature: 0° C to +50°C/+32°F to +122°F − Humidity: 5% to 93% non-condensing − AP is plenum rated for use in air-handling spaces − ETS 300 019 class 3.2 environments.
What interfaces and ports does Q9H57A provide?
For Q9H57A, the manufacturer specification lists storage and transportation conditions as − Temperature: -40°C to +70°C/-40°F to +158°F − Humidity: 5% to 93% non-condensing − ETS 300 019 classes 1.2 and 2.3 environments.
Is Q9H57A available from YYST Global?
Q9H57A is in stock at YYST Global. Contact the sales team to confirm the required quantity, exact configuration, delivery destination and current lead time before ordering.
Related products
Related Q9H57A
Aruba Q9H57A AP‑514 Dual Radio Wi‑Fi 6 Access Point
Q9H57A ARUBA wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.
Q9G70ACM - HPE Aruba CM AP-MNT-MP10-C Mounting Bracket
Q9G70ACM ARUBA wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.
Q9G71ACM - HPE Aruba CM AP-MNT-MP10-D Mounting Bracket
Q9G71ACM ARUBA wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.
Q9G69ACM - HPE Aruba CM AP-MNT-MP10-B Mounting Bracket
Q9G69ACM ARUBA wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.
HPE Aruba R3T20A AP-MNT-MP10-X 10-Pack Mount Adapter Kit
R3T20A is the HPE Aruba Networking AP-MNT-MP10-X campus access point mount adapter kit supplied as a 10-pack. It adapts selected Aruba AP installations to existing W2/W3 mounts; it is mounting hardware, not a wireless access point.
R3J18ACM - HPE Aruba CM AP-MNT-D Mount Bracket Kit
R3J18ACM ARUBA wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.
R3J17ACM - HPE Aruba CM AP-MNT-C Mount Bracket Kit
R3J17ACM ARUBA wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.
R3J15ACM - HPE Aruba CM AP-MNT-A Mount Bracket Kit
R3J15ACM ARUBA wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.
ISO 9001 · ISO 14001 · ISO 45001
ISO 20000 · ISO 27001 · D&B