Condition: New Factory Sealed

CNSNS-LIC-S5700-LI-48P is a license entitlement for the S5700 LI tier and a forty-eight-port class. Physical hardware is not included.

Condition: New Factory Sealed

CNSNS-LIC-S5700-S-48P is a license entitlement for the S5700 S tier and a forty-eight-port class. This listing is not a switch appliance.

Condition: New Factory Sealed

CNSNS-LIC-S5700-EI-48P is a license entitlement for the S5700 EI tier and a forty-eight-port class. It does not include hardware.

Condition: New Factory Sealed

CNSNS-LIC-S5700-EI-24P is a license entitlement for the S5700 EI tier and a twenty-four-port class. No switch chassis is included.

Condition: New Factory Sealed

CNSNS-LIC-S5700-S-8P is a license entitlement scoped to the S5700 S tier and an eight-port class. It is not a physical switch.

Condition: New Factory Sealed

S2750-20TP-PWR-EI-AC is the sixteen-downlink PoE model in this pair, concentrating powered access on a smaller endpoint population. Its official device power ceiling is below four-hundred-forty watts, while the PoE budget is below three-hundred-seventy-five watts. The sixteen-port layout has eight fewer downlinks but a slightly higher published aggregate PoE allowance than S2750-28TP-PWR-EI-AC.

Condition: New Factory Sealed

S2750-28TP-PWR-EI-AC is the twenty-four-downlink PoE model in this pair, providing eight more powered copper endpoint positions than S2750-20TP-PWR-EI-AC. Its official device power ceiling is below four-hundred-forty-five watts, including a PoE budget below three-hundred-seventy watts. This SKU distributes the published PoE capacity across the larger twenty-four-port access population.

Condition: New Factory Sealed

S2730S-S24FT4S-A has a published typical power figure of thirty-two-point-seven watts and maximum power of forty-seven-point-six watts. Its specified long-term operating humidity range is five to ninety-five percent noncondensing.

Condition: New Factory Sealed

S1730S-H48T4S-A doubles copper access density to forty-eight Gigabit Ethernet ports while retaining four Gigabit SFP uplinks. It uses a built-in AC power module and is listed at seventy-seven-point-three-eight million packets per second forwarding performance.

Condition: New Factory Sealed

S1730S-S24T4S-A provides twenty-four copper Gigabit Ethernet access ports and four Gigabit SFP uplinks. The manufacturer lists one-hundred-sixty-eight-gigabit switching capacity, forty-one-point-six-six-million-packet forwarding performance and a thirty-four-watt maximum power figure.

Condition: New Factory Sealed

S2700-9TP-EI-AC is the compact model with eight Fast Ethernet downlinks and one dual-purpose Gigabit uplink. It is listed at two-point-seven million packets per second and uses a twenty-five-centimetre-wide enclosure. S2700-18TP-EI-AC doubles both downlink and uplink counts.

Condition: New Factory Sealed

S2700-18TP-EI-AC provides sixteen Fast Ethernet downlinks and two dual-purpose Gigabit uplinks. Its official forwarding rate is five-point-four million packets per second, and the chassis is forty-four-point-two centimetres wide. S2700-9TP-EI-AC halves downlink density and uses a much narrower enclosure.

Condition: New Factory Sealed

S2750-28TP-EI-AC is the non-PoE member of this twenty-four-port Fast Ethernet pair. Its chassis depth is two-hundred-twenty millimetres, approximate weight is below three kilograms and power consumption is below fifteen-point-seven watts. S2751-28TP-PWR-EI-AC is deeper and designed to supply endpoint power.

Condition: New Factory Sealed

S2751-28TP-PWR-EI-AC is the PoE-capable member of this twenty-four-port Fast Ethernet pair. Its deeper chassis supports a power ceiling below one-hundred-forty-seven watts, including up to one-hundred-twenty-four watts for PoE loads. S2750-28TP-EI-AC is the shallower non-PoE switch with much lower consumption.

Condition: New Factory Sealed

CE8861-4C-EI has the following distinguishing entries in the manufacturer specification. Weight: ~twenty-eight kg (fully configured). Typical Power Consumption: ~ nine hundred W (depending on line cards). Maximum Power Consumption: ~ one thousand eight hundred W.

Condition: New Factory Sealed

CE8860-4C-EI has the following distinguishing entries in the manufacturer specification. Weight: ~thirty kg (fully configured). Typical Power Consumption: ~ eight hundred fifty W (depending on modules). Maximum Power Consumption: ~ one thousand seven hundred W.

Condition: New Factory Sealed

S5735-L12T4S-A has the following distinguishing entries in the manufacturer specification. Fixed Ports: twelve x ten/one hundred/1000Base-T ports, four x GE SFP ports. Switching Capacity2: thirty-two Gbit/s/three hundred thirty-six Gbit/s. S5735-L12T4S-A Specification Forwarding Performance: twenty-four Mpps.

Condition: New Factory Sealed

S5735S-L24P4X-A has the following distinguishing entries in the manufacturer specification. Fixed Ports: twenty-four x ten/one hundred/1000Base-T ports, four x ten GE SFP+ ports. Switching Capacity2: one hundred twenty-eight Gbit/s/three hundred thirty-six Gbit/s. S5735S-L24P4X-A Specification Forwarding Performance: ninety-six Mpps.

Condition: New Factory Sealed

S2720-12TP-EI has the following distinguishing entries in the manufacturer specification. Ports: twelve × ten/one hundred/1000BASE-T Ethernet ports. Weight: Around three.six kg. Switching Capacity: thirty-two Gbit/s. Forwarding Rate: twenty-four Mpps.

Condition: New Factory Sealed

S2720-12TP-PWR-EI has the following distinguishing entries in the manufacturer specification. Ports: twelve × ten/one hundred/1000BASE-T Ethernet ports (PoE/PoE+). PoE Power Budget: Up to one hundred eighty W (total), per port max thirty W. Dimensions (W × D × H): Approx. four hundred forty-two mm × two hundred twenty mm × forty-three.six mm. Weight: Around four.two kg. Switching Capacity: thirty-two Gbit/s. Forwarding Rate: twenty-four Mpps.