Huawei CloudEngine S2730S-S24FP4S-A PoE+ Access Switch

S2730S-S24FP4S-A Mixed-Speed PoE+ Access

S2730S-S24FP4S-A is the larger PoE+ member in this S2730S-S comparison. Huawei specifies 12 10/100BASE-TX ports, 12 10/100/1000BASE-T ports and four Gigabit SFP interfaces, with 336 Gbit/s switching capacity and 25.8 Mpps packet forwarding.

Map endpoints to the correct speed class

The two copper groups are not equivalent. Put low-bandwidth powered endpoints on documented Fast Ethernet positions and reserve the Gigabit positions for devices whose traffic or software updates require higher throughput. The cable schedule should name port speed, VLAN, PoE class and endpoint owner for all 24 copper links.

Size PoE from measured demand

PoE+ support does not disclose the available total wattage for the delivered unit. Record each endpoint's negotiated class and startup draw, then confirm the actual switch power budget and remaining headroom before approving a fully populated design.

Use four SFP links deliberately

Assign the four Gigabit SFP positions to uplinks or resilient paths and verify optic reach, fiber type and peer compatibility. A physically fitting module is not automatically supported; preserve the software release and optical inventory used during acceptance.

Management and handover

Huawei documents iMaster NCE-Campus reporting for this exact model on V200R020C10 and later. If cloud management is required, verify onboarding, alarm reporting and rollback separately. Receive against the full model label, then test representative Fast Ethernet, Gigabit, SFP and PoE+ paths.

Official evidence: Huawei S2730S-S specifications, Huawei exact-model Hardware Center and Huawei management-version requirements.