Brand procurement
RUCKUS Products and Procurement - Page 4
Browse RUCKUS products for Ruckus access points, ICX switches, controllers, licenses, antennas and wireless accessories. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.
Recently updated
Recently Updated RUCKUS Products
Ruckus ICX7450-48P-STK-E-RMT3 PoE+ Stack Member Bundle
ICX7450-48P-STK-E-RMT3 is a Ruckus 48-port 1 GbE PoE+ switch bundle ordered as a stack member, not a standalone expansion module. The exact ordering row includes two 40 GbE QSFP+ uplink/stacking ports, one 1000 W AC power supply and one fan with front-to-back airflow. It expressly specifies a stack member with no uplink module. The RMT3 suffix records three years of 24x7 remote support in the original order; current entitlement and supplied configuration must be confirmed on the quotation.
Ruckus ICX7450-48F-E-RMT3 Fiber Switch Bundle
ICX7450-48F-E-RMT3 is a Ruckus 48-port 1 GbE SFP fiber switch bundle, rather than a standalone expansion module. Its exact manufacturer ordering row specifies four 10 GbE SFP+ ports, two 40 GbE QSFP+ ports, one 250 W AC power supply and one fan with front-to-back airflow. RMT3 describes three years of 24x7 remote support in the original order. Confirm the quoted unit configuration and current support eligibility; the historical bundle description does not establish a new support term beginning today.
RUCKUS 902-2101-0000 E510 External Antenna Module
902-2101-0000 is the RUCKUS external antenna module for E510, not a network switch or a complete access point. It is an omnidirectional, dual-polarized, dual-band antenna with BeamFlex+ support and RP-SMA connections; connecting cables are ordered separately. The official Series image shows the separate E510 RF/AP module, not this antenna or the supplied package.
RUCKUS RPS20-E 920 W AC Power Supply for ICX7150-48ZP
RPS20-E is the RUCKUS 920 W AC hot-swap PoE power supply for ICX7150-48ZP, not a network switch. It uses front-to-back airflow; the official ordering table limits this part to the Z-Series.
RUCKUS L09-0001-SG00 Single AP Management License
L09-0001-SG00 is a RUCKUS management license for one AP on the specified SmartZone platforms, not wireless hardware. The cited ordering reference lists SZ-100, vSZ 3.X, SCG200 and SZ300, for software from version 3.2.
RUCKUS 909-0001-ZD12 ZoneDirector 1200 Single AP License Upgrade
909-0001-ZD12 adds one AP license to a RUCKUS ZoneDirector 1200 controller; it is not an access point or controller appliance. The documented expansion ceiling depends on the controller software release.
RUCKUS RPS9DC+E 500 W DC Power Supply, PSU-Side Exhaust
RPS9DC+E is a 500 W DC power supply listed for RUCKUS ICX 7750 switches. Its airflow exhausts at the power-supply side and enters at the port side; it is not a network switch.
ICX7000-C12-RMK Compact Switch Rack Mount Kit
ICX7000-C12-RMK is a RUCKUS rack-mount accessory for the ICX7150-C12P switch. It is a mounting kit, not a network switch; confirm the exact kit and installation requirements before ordering.
RUCKUS Procurement Guide
RUCKUS buyers should validate Unleashed, controller or cloud management mode, regional radio domain and antenna type, PoE, mounting and license requirements. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
- Confirm Unleashed, controller or cloud management mode before ordering.
- Confirm regional radio domain and antenna type before ordering.
- Confirm PoE, mounting and license requirements before ordering.
How to compare RUCKUS models
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: New Factory Sealed
ICX7000-C10ZP-RMK is the rack-mount kit identified by RUCKUS specifically for the ICX7150-C10ZP compact switch. The official row does not extend this exact kit to other compact or 24/48-port ICX models.US$ 60.00
Condition: New Factory Sealed
RPS16-I is the 1,000 W AC power-supply order for PoE-capable RUCKUS ICX 7450 and ICX 6610 switches. The I suffix defines back-to-front airflow; the exact PID must not be substituted with an E-direction or DC-input module.Request current pricing
Condition: New Factory Sealed
RPS16DC-E is the front-to-back airflow, 510 W DC power-supply order for PoE-capable RUCKUS ICX 7450 and ICX 6610 switches. Its DC input class, E airflow suffix, platform range, and 510 W rating are all part of the exact receiving identity.Request current pricing
Condition: New Factory Sealed
BR-ICX-7150Z210U810R-P-01 applies specifically to the ICX 7150 Z-Series. It upgrades six 1 GbE SFP and two 10 GbE SFP+ interfaces to eight 10 GbE SFP+ stacking/uplink ports, with no more than four used for stacking, and includes OSPF, VRRP, PIM, and PBR.US$ 1,900.00
Condition: New Factory Sealed
BR-ICX-7150-210U410R-P-01 is the incremental license for a non-Z-Series ICX 7150 24-port or 48-port switch already operating with two 1 GbE SFP and two 10 GbE SFP+ stacking/uplink ports. It converts the remaining SFP pair so the result is four 10 GbE SFP+ ports and includes OSPF, VRRP, PIM, and PBR.US$ 1,900.00
Condition: New Factory Sealed
BR-ICX-7150-41U410R-P-01 upgrades all four 1 GbE SFP uplinks on an eligible ICX 7150 24-port or 48-port non-Z-Series switch to four 10 GbE SFP+ stacking/uplink ports. The same entitlement includes OSPF, VRRP, PIM, and PBR Layer 3 features.US$ 1,900.00
Condition: New Factory Sealed
BR-ICX-7150-41U210-P-01 is a software entitlement for non-Z-Series RUCKUS ICX 7150 24-port or 48-port switches. It changes a four-port 1 GbE SFP uplink set into two 1 GbE SFP ports plus two 10 GbE SFP+ stacking/uplink ports. The official ordering row does not add advanced Layer 3 rights to this PID.US$ 1,900.00
Condition: New Factory Sealed
ICX7150-48PF-2X10G is the full-power ICX 7150 order. It supplies a 740 W budget across forty-eight 10/100/1000 Mbps PoE+ access connections and carries two 1 GbE RJ45 uplinks, two 1 GbE SFP slots, plus two 10 GbE SFP+ stacking/uplink ports. The SFP pair can become 10 GbE under license; static routing and RIP form the basic Layer 3 scope.US$ 600.00
Condition: New Factory Sealed
ICX7150-48P-2X10G is the 370 W ICX 7150 order for forty-eight 10/100/1000 Mbps PoE+ access connections. Its uplink block contains two 1 GbE copper interfaces, two 1 GbE SFP slots, and two 10 GbE SFP+ stacking/uplink interfaces. A license can raise the SFP pair to 10 GbE; basic Layer 3 covers static routing and RIP.US$ 600.00
Condition: New Factory Sealed
ICX7150-48PF-4X1G is the exact RUCKUS ICX 7150 order with 48 x 10/100/1000 Mbps PoE+ access ports. It provides 2 x 1 GbE RJ45 and 4 x 1 GbE SFP uplink ports; the SFP group is license-upgradable to 4 x 10 GbE SFP+. Its ordering row specifies 740 W PoE budget and basic Layer 3 static routing and RIP.US$ 600.00
Condition: New Factory Sealed
ICX7150-48-4X1G is the exact RUCKUS ICX 7150 order with 48 x 10/100/1000 Mbps non-PoE access ports. It provides 2 x 1 GbE RJ45 and 4 x 1 GbE SFP uplink ports; the SFP group is license-upgradable to as many as 4 x 10 GbE SFP+. Its ordering row specifies no PoE budget is stated for this non-PoE PID and basic Layer 3 static routing and RIP.US$ 600.00
Condition: New Factory Sealed
ICX7150-C12P-2X1G is the exact RUCKUS ICX 7150 order with 12 x 10/100/1000 Mbps PoE+ access ports. It provides 2 x 1 GbE RJ45 and 2 x 1 GbE SFP uplink ports; the SFP pair is license-upgradable to 2 x 10 GbE SFP+. Its ordering row specifies 124 W PoE budget and basic Layer 3 static routing and RIP.US$ 600.00
Condition: New Factory Sealed
ICX7650-2X40GQ is an ICX 7650/7550 two-port 40GbE QSFP+ module. It is a host-switch expansion module, not a standalone switch, optic or support contract.US$ 1,600.00
Condition: New Factory Sealed
ICX7550-48F is the RUCKUS 48-port mixed 1GbE and 1/10GbE fiber aggregation switch with 36 100/1000Mb SFP plus 12 1/10GbE SFP/SFP+. Verify power supplies, optics, airflow, software and the exact deployment bill of materials before purchase.US$ 1,600.00
Condition: New Factory Sealed
ICX7550-48F-E2-R3 is the exact ICX 7550 order with 36 x 100/1000 Mbps SFP plus 12 x 1/10 GbE SFP+. Its order boundary is 2 x 400 W AC supplies and 3 front-to-back fans; port module and optics separate. The official row does not state an R3 term despite the PID text; verify entitlement before claiming support.Request current pricing
Condition: New Factory Sealed
ICX7550-24F-E2-R3 is the exact ICX 7550 order with 24 x 1/10 GbE SFP+. Its order boundary is 2 x 400 W AC supplies and 3 front-to-back fans; port module and optics separate. Three years remote support included.Request current pricing
Condition: New Factory Sealed
ICX7550-48P-E2-R3 is the exact ICX 7550 order with 48 x 10/100/1000 Mbps 802.3at PoE+. Its order boundary is 2 x 1200 W AC supplies and 3 front-to-back fans; port module separate. Three years remote support included.US$ 1,900.00
Condition: New Factory Sealed
ICX7550-48ZP-E2 is the exact ICX 7550 order with 36 ports up to 2.5 GbE plus 12 ports up to 10 GbE, all 802.3bt PoE++. Its order boundary is 2 x 1200 W power supplies and 3 front-to-back fans; port module separate. No R3 support term in this PID.US$ 1,900.00
Condition: New Factory Sealed
ICX7550-24ZP-E2 is the exact ICX 7550 order with 12 ports up to 2.5 GbE plus 12 ports up to 10 GbE, all 802.3bt PoE++. Its order boundary is 2 x 1200 W AC supplies and 3 front-to-back fans; port module separate. No R3 support term in this PID.US$ 1,900.00
Condition: New Factory Sealed
ICX7750-FAN-I is the exact ICX 7750 accessory order for a kit of four fan units. RUCKUS defines fan-side intake, which produces port-side exhaust airflow.Request current pricing
- 1
- 2
- 3
- 4
- 5
- 6
- 11