Brand procurement
JUNIPER Products and Procurement - Page 16
Browse JUNIPER products for EX and QFX switching, MX and ACX routing, SRX security, Mist wireless, optics and service subscriptions. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.
Recently updated
Recently Updated JUNIPER Products
Juniper SRX4100-E-P-UPG Enhanced Performance Upgrade License
Juniper SRX4100-E-P-UPG enhances SRX4100 performance and application security. Confirm installed software, entitlement and lifecycle; request a quote.
Juniper S-ACX-400G-A-1 Advanced Subscription Renewal License
Juniper S-ACX-400G-A-1: one-year Advanced software, per 400G. Check ACX5448-family eligibility and the dated renewal restriction; request a quote.
Juniper S-ACX-400G-P-1 Premium Software Renewal License
Juniper S-ACX-400G-P-1 renews Premium software for ACX5448-D/M for one year, per 400G capacity. Verify renewal eligibility and request a quote.
Juniper ACX5448-L-PE FIB and VRF Scale Feature License
Juniper ACX5448-L-PE licenses FIB scale above 256K and more than 512 VRFs on ACX5448, within equipment limits. Confirm entitlement and request a quote.
Juniper ACX500-LIC-SEC IPsec and NAT Feature Activation License
Juniper ACX500-LIC-SEC activates IPsec and NAT on ACX500. Last order has passed; confirm entitlement eligibility and request a quote.
Juniper ACX500-LIC-GPS Receiver Activation License
Juniper ACX500-LIC-GPS activates the ACX500 GPS receiver. Manufacturer last order has passed; confirm license eligibility and request a quote.
Juniper ACX5448-D-FAN-AFI Airflow-In Fan Module
ACX5448-D-FAN-AFI is a Juniper cooling fan module listed for ACX5448-D-AC-AFI and ACX5448-D-DC-AFI in the official hardware compatibility matrix. Its back-to-front airflow takes air in at the rear fans and exhausts it at the front ports. The named fan row uses AIR IN and blue identification; power-module airflow must match. The order is a replacement cooling component, not a complete D router or a full set of fans. The generic official Series illustration is not a supplied-unit photograph.
Juniper ACX5448-FAN-AFO Front-to-Back Fan Module
ACX5448-FAN-AFO is the Juniper airflow-out fan module for an ACX5448 cooling configuration. Air enters at the front panel and exits through the rear fan modules: ports-to-FRUs, or front-to-back airflow. The exact official table identifies AFO with AIR OUT and orange markings and requires matching AIR OUT power modules. This is a cooling component; a complete router or fan set is not implied. The generic official Series drawing is not a supplied-unit photograph.
JUNIPER Procurement Guide
JUNIPER buyers should validate Junos and license requirements, port, optics and airflow compatibility, power option, TAA requirement and support status. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
- Confirm Junos and license requirements before ordering.
- Confirm port, optics and airflow compatibility before ordering.
- Confirm power option, TAA requirement and support status before ordering.
How to compare JUNIPER models
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: New Factory Sealed
SRX5800X-CHAS-BB is enhanced-midplane SRX5800 chassis allocated as a base-build component. The BB suffix marks a component included in a parent base configuration and must not be purchased or counted as a second complete system. This is a chassis component, not a complete operational firewall. Missing power, cooling, control, processing and interface assemblies must be ordered and validated separately.US$ 15,000.00
Condition: New Factory Sealed
SRX5400X-BASE2-TAA is TAA-compliant enhanced-midplane BASE2 system foundation. Uses the BASE2 control-plane foundation under a regulated sourcing SKU; service and interface cards still require an explicit BOM. This is a modular system configuration; optics, additional cards, licenses, support and site power work are separate unless explicitly listed.US$ 11,237.00
Condition: New Factory Sealed
SRX5400X-BASE2 is enhanced-midplane BASE2 system foundation. Includes the chassis, enhanced plane, SRX5K-MPC-RE3-128G, one SCB3, two high-capacity PEMs and one high-capacity fan tray; supported from Junos 19.3R1. This is a modular system configuration; optics, additional cards, licenses, support and site power work are separate unless explicitly listed.US$ 11,363.00
Condition: New Factory Sealed
SRX5400E-B1-AC is standard-midplane SRX5400E configuration B1 with AC power. Includes SCBE-generation control, one services card, MPC, 10GbE MIC, two AC high-capacity PEMs and fan tray. This is a modular system configuration; optics, additional cards, licenses, support and site power work are separate unless explicitly listed.US$ 36,000.00
Condition: New Factory Sealed
SRX5400E-B1-AC-TAA is TAA-compliant SRX5400E B1 configuration with AC power. Regulated-sourcing form of the standard-midplane B1 AC system. This is a modular system configuration; optics, additional cards, licenses, support and site power work are separate unless explicitly listed.US$ 36,000.00
Condition: New Factory Sealed
SRX5400E-B1-DC is standard-midplane SRX5400E configuration B1 with DC power. Includes SCBE-generation control, one services card, MPC, 10GbE MIC, two DC high-capacity PEMs and fan tray. This is a modular system configuration; optics, additional cards, licenses, support and site power work are separate unless explicitly listed.US$ 36,000.00
Condition: New Factory Sealed
SRX5400E-B1-DC-TAA is TAA-compliant SRX5400E B1 configuration with DC power. Regulated-sourcing form of the standard-midplane B1 DC system. This is a modular system configuration; optics, additional cards, licenses, support and site power work are separate unless explicitly listed.US$ 38,000.00
Condition: New Factory Sealed
SRX5400E-B2-AC is standard-midplane SRX5400E configuration B2 with AC power. B2 adds a second services-processing card to the B1 AC control, MPC and 10GbE MIC foundation. This is a modular system configuration; optics, additional cards, licenses, support and site power work are separate unless explicitly listed.US$ 56,000.00
Condition: New Factory Sealed
SRX5400E-B2-DC is standard-midplane SRX5400E configuration B2 with DC power. B2 uses two services-processing cards with SCBE, MPC, 10GbE MIC and DC high-capacity power. This is a modular system configuration; optics, additional cards, licenses, support and site power work are separate unless explicitly listed.US$ 56,000.00
Condition: New Factory Sealed
SRX5400E-B5-AC is standard-midplane SRX5400E AC cluster bundle B5. Historical two-node E-generation cluster with additional redundant AC PEMs and application-security entitlement. This is a multi-node or historical bundle code. Exact node count, cards, power modules and entitlement terms must be confirmed from the manufacturer quote and installed serials.US$ 64,000.00
Condition: New Factory Sealed
SRX5400E-B5-DC is standard-midplane SRX5400E DC cluster bundle B5. Historical two-node E-generation cluster with additional redundant DC PEMs and application-security entitlement. This is a multi-node or historical bundle code. Exact node count, cards, power modules and entitlement terms must be confirmed from the manufacturer quote and installed serials.US$ 64,000.00
Condition: New Factory Sealed
SRX5400X-B1 is enhanced-midplane single-system configuration B1. Includes RE, SCB3, high-capacity power and cooling, one services-processing card, MPC and 10GbE MIC according to the ordering generation. This is a modular system configuration; optics, additional cards, licenses, support and site power work are separate unless explicitly listed.US$ 53,000.00
Condition: New Factory Sealed
SRX5400X-B10-AC is AC-powered SRX5400X historical cluster bundle B10. B10 is a bundle-level order code rather than a bare chassis; its exact node, card, power and entitlement BOM must be confirmed. This is a multi-node or historical bundle code. Exact node count, cards, power modules and entitlement terms must be confirmed from the manufacturer quote and installed serials.US$ 105,780.00
Condition: New Factory Sealed
SRX5400X-B10-DC is DC-powered SRX5400X historical cluster bundle B10. B10 requires exact confirmation of both node configurations, DC PEM quantity, cards and entitlement term. This is a multi-node or historical bundle code. Exact node count, cards, power modules and entitlement terms must be confirmed from the manufacturer quote and installed serials.US$ 105,780.00
Condition: New Factory Sealed
SRX5400X-B2 is enhanced-midplane single-system configuration B2. Uses the B1 control and services foundation with an MPC3 40GbE/10GbE interface configuration. This is a modular system configuration; optics, additional cards, licenses, support and site power work are separate unless explicitly listed.US$ 72,100.00
Condition: New Factory Sealed
SRX5400X-B3 is enhanced-midplane single-system configuration B3. Uses the enhanced control and services foundation with an MPC3 100GbE/10GbE interface configuration. This is a modular system configuration; optics, additional cards, licenses, support and site power work are separate unless explicitly listed.US$ 75,000.00
Condition: New Factory Sealed
SRX5400X-B5-AC is AC-powered SRX5400X cluster bundle B5. Historical two-node cluster bundle built from B1-class nodes with additional redundant AC PEMs and bundle-specific application-security entitlement. This is a multi-node or historical bundle code. Exact node count, cards, power modules and entitlement terms must be confirmed from the manufacturer quote and installed serials.US$ 141,356.00
Condition: New Factory Sealed
SRX5400X-B5-DC is DC-powered SRX5400X cluster bundle B5. Historical two-node cluster bundle with additional 2400 W DC PEMs and bundle-specific application-security entitlement. This is a multi-node or historical bundle code. Exact node count, cards, power modules and entitlement terms must be confirmed from the manufacturer quote and installed serials.US$ 141,356.00
Condition: New Factory Sealed
SRX5400X-B6-AC is AC-powered SRX5400X historical cluster bundle B6. Bundle code B6 identifies a specific two-node factory BOM; exact cards and entitlement must be reconciled from the Juniper quote. This is a multi-node or historical bundle code. Exact node count, cards, power modules and entitlement terms must be confirmed from the manufacturer quote and installed serials.US$ 69,000.00
Condition: New Factory Sealed
SRX5400X-B6-DC is DC-powered SRX5400X historical cluster bundle B6. Bundle code B6 requires serial-level confirmation of node, card, entitlement and 2400 W DC power contents. This is a multi-node or historical bundle code. Exact node count, cards, power modules and entitlement terms must be confirmed from the manufacturer quote and installed serials.US$ 69,000.00
- 1
- 14
- 15
- 16
- 17
- 18
- 23