Brand procurement
JUNIPER Products and Procurement - Page 15
Browse JUNIPER products for EX and QFX switching, MX and ACX routing, SRX security, Mist wireless, optics and service subscriptions. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.
Recently updated
Recently Updated JUNIPER Products
Juniper SRX4100-E-P-UPG Enhanced Performance Upgrade License
Juniper SRX4100-E-P-UPG enhances SRX4100 performance and application security. Confirm installed software, entitlement and lifecycle; request a quote.
Juniper S-ACX-400G-A-1 Advanced Subscription Renewal License
Juniper S-ACX-400G-A-1: one-year Advanced software, per 400G. Check ACX5448-family eligibility and the dated renewal restriction; request a quote.
Juniper S-ACX-400G-P-1 Premium Software Renewal License
Juniper S-ACX-400G-P-1 renews Premium software for ACX5448-D/M for one year, per 400G capacity. Verify renewal eligibility and request a quote.
Juniper ACX5448-L-PE FIB and VRF Scale Feature License
Juniper ACX5448-L-PE licenses FIB scale above 256K and more than 512 VRFs on ACX5448, within equipment limits. Confirm entitlement and request a quote.
Juniper ACX500-LIC-SEC IPsec and NAT Feature Activation License
Juniper ACX500-LIC-SEC activates IPsec and NAT on ACX500. Last order has passed; confirm entitlement eligibility and request a quote.
Juniper ACX500-LIC-GPS Receiver Activation License
Juniper ACX500-LIC-GPS activates the ACX500 GPS receiver. Manufacturer last order has passed; confirm license eligibility and request a quote.
Juniper ACX5448-D-FAN-AFI Airflow-In Fan Module
ACX5448-D-FAN-AFI is a Juniper cooling fan module listed for ACX5448-D-AC-AFI and ACX5448-D-DC-AFI in the official hardware compatibility matrix. Its back-to-front airflow takes air in at the rear fans and exhausts it at the front ports. The named fan row uses AIR IN and blue identification; power-module airflow must match. The order is a replacement cooling component, not a complete D router or a full set of fans. The generic official Series illustration is not a supplied-unit photograph.
Juniper ACX5448-FAN-AFO Front-to-Back Fan Module
ACX5448-FAN-AFO is the Juniper airflow-out fan module for an ACX5448 cooling configuration. Air enters at the front panel and exits through the rear fan modules: ports-to-FRUs, or front-to-back airflow. The exact official table identifies AFO with AIR OUT and orange markings and requires matching AIR OUT power modules. This is a cooling component; a complete router or fan set is not implied. The generic official Series drawing is not a supplied-unit photograph.
JUNIPER Procurement Guide
JUNIPER buyers should validate Junos and license requirements, port, optics and airflow compatibility, power option, TAA requirement and support status. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
- Confirm Junos and license requirements before ordering.
- Confirm port, optics and airflow compatibility before ordering.
- Confirm power option, TAA requirement and support status before ordering.
How to compare JUNIPER models
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: New Factory Sealed
EX4600-40F-AFO is a Juniper EX4600 Ethernet switch with 24 fixed SFP/SFP+ ports and four fixed QSFP+ ports; no copper PoE access ports. The complete code carries airflow-out order form. Preserve every suffix on the quote, carton and asset record. Verify power, airflow, PoE budget, uplink modules, optics, Junos support and lifecycle before purchase.US$ 1,888.00
Condition: New Factory Sealed
EX4300-32F-TAA is a Juniper EX4300 Ethernet switch with 32 built-in 1-Gigabit SFP ports, four SFP+ ports and two QSFP+ ports; no PoE ports. The complete code carries TAA procurement-qualified order suffix. Preserve every suffix on the quote, carton and asset record. Verify power, airflow, PoE budget, uplink modules, optics, Junos support and lifecycle before purchase.US$ 888.00
Condition: New Factory Sealed
EX4300-32F-DC-TAA is a Juniper EX4300 Ethernet switch with 32 built-in 1-Gigabit SFP ports, four SFP+ ports and two QSFP+ ports; no PoE ports. The complete code carries TAA procurement-qualified order suffix, DC-powered order form. Preserve every suffix on the quote, carton and asset record. Verify power, airflow, PoE budget, uplink modules, optics, Junos support and lifecycle before purchase.US$ 3,046.00
Condition: New Factory Sealed
EX4300-24T is a Juniper EX4300 Ethernet switch with 24 10/100/1000BASE-T access ports; no PoE on access ports. This base order code has no TAA, VC, DC or explicit airflow qualifier in the model string; do not import those properties from a nearby SKU. Verify power, airflow, PoE budget, uplink modules, optics, Junos support and lifecycle before purchase.US$ 2,306.00
Condition: New Factory Sealed
SRX5800X-BASE is enhanced-midplane SRX5800 base-system order code. It defines a twelve-slot modular platform foundation; exact controls, processing cards, interfaces, power and cooling depend on the ordering-generation BOM. This is a modular base or system configuration. Port capacity, services processing, optics, licenses and support are separate unless the exact manufacturer BOM lists them.US$ 9,900.00
Condition: New Factory Sealed
SRX5800X-BASE2-TAA is TAA-compliant enhanced-midplane SRX5800 BASE2 foundation. It carries the BASE2 control and cooling foundation under a regulated-sourcing SKU; compliance for separately ordered cards and optics must be proven independently. TAA status applies to the exact regulated-sourcing SKU and documented included components; it does not automatically cover separately procured cards, optics or services.US$ 25,000.00
Condition: New Factory Sealed
SRX5800X-BASE2 is enhanced-midplane SRX5800 BASE2 system foundation. The BASE2 generation uses RE3-class control, SCB3, high-capacity power and two high-capacity fan trays; services and interfaces remain separately validated BOM items. This is a modular base or system configuration. Port capacity, services processing, optics, licenses and support are separate unless the exact manufacturer BOM lists them.US$ 25,000.00
Condition: New Factory Sealed
SRX5600X-BASE2-TAA is TAA-compliant enhanced-midplane SRX5600 BASE2 foundation. It applies the BASE2 control-plane generation under a regulated-sourcing SKU; separately ordered services, interface and optic items do not inherit compliance automatically. TAA status applies to the exact regulated-sourcing SKU and documented included components; it does not automatically cover separately procured cards, optics or services.US$ 20,105.00
Condition: New Factory Sealed
SRX5600X-BASE2 is enhanced-midplane SRX5600 BASE2 system foundation. The BASE2 generation uses the enhanced plane with the RE3/MPC-RE3-128G control foundation, SCB3, high-capacity power and cooling; services and interface cards remain explicit BOM items. This is a modular base or system configuration. Port capacity, services processing, optics, licenses and support are separate unless the exact manufacturer BOM lists them.US$ 19,406.00
Condition: New Factory Sealed
SRX5600-CHAS is standard-midplane SRX5600 spare chassis. The backplane is installed, but the fan tray, power supplies, routing engine, switch-control boards, processing cards and interface cards are not supplied as a complete system. This is a chassis component, not a complete operational firewall. Missing power, cooling, control, processing and interface assemblies must be ordered and validated separately.US$ 9,800.00
Condition: New Factory Sealed
SRX5600E-B1-AC-TAA is TAA-compliant SRX5600E B1 configuration with AC power. This regulated-sourcing B1 order combines an E-generation control and services configuration with an AC power foundation. TAA status applies to the exact regulated-sourcing SKU and documented included components; it does not automatically cover separately procured cards, optics or services.US$ 85,000.00
Condition: New Factory Sealed
SRX5600E-BASE-AC is standard-midplane SRX5600E base system with high-capacity AC power. This E-generation foundation uses the standard-midplane control family and AC power path; processing, interfaces, optics and licenses must follow the exact approved BOM. This is a modular base or system configuration. Port capacity, services processing, optics, licenses and support are separate unless the exact manufacturer BOM lists them.US$ 31,200.00
Condition: New Factory Sealed
SRX5600E-BASE-DC is standard-midplane SRX5600E base system with high-capacity DC power. The DC chassis is power-zoned, so installed IOC, SPC and switch-control board slots draw from defined PEM groups. This is a modular base or system configuration. Port capacity, services processing, optics, licenses and support are separate unless the exact manufacturer BOM lists them.US$ 32,500.00
Condition: New Factory Sealed
SRX5600X-B10-DC is DC-powered historical SRX5600X B10 bundle. Its exact node count, card population, high-capacity DC supplies and entitlement term are serial-specific ordering facts. This historical bundle code requires quote- and serial-level BOM proof. Node count, cards, power modules and entitlement terms must not be inferred from a nearby bundle number.US$ 35,600.00
Condition: New Factory Sealed
SRX5600X-B10-AC is AC-powered historical SRX5600X B10 bundle. B10 is a bundle-level order code rather than a bare chassis; the exact node, card, power and entitlement contents require confirmation from the original Juniper quote. This historical bundle code requires quote- and serial-level BOM proof. Node count, cards, power modules and entitlement terms must not be inferred from a nearby bundle number.US$ 38,900.00
Condition: New Factory Sealed
SRX5600X-BASE is enhanced-midplane SRX5600 base-system order code. It establishes the modular chassis foundation; the exact control, processing, interface, power and cooling contents depend on the approved ordering-generation BOM. This is a modular base or system configuration. Port capacity, services processing, optics, licenses and support are separate unless the exact manufacturer BOM lists them.US$ 55,000.00
Condition: New Factory Sealed
SRX5600X-CHAS-BB is enhanced-midplane SRX5600 chassis allocated as a base-build component. The BB suffix identifies a chassis component already represented inside a parent base configuration; it is not a complete independently deployable firewall. This is a chassis component, not a complete operational firewall. Missing power, cooling, control, processing and interface assemblies must be ordered and validated separately.US$ 11,000.00
Condition: New Factory Sealed
SRX5800E-BASE-AC is standard-midplane SRX5800E base system with high-capacity AC power. This E-generation twelve-slot foundation uses shared AC distribution and requires high-capacity cooling for high-demand services cards. This is a modular base or system configuration. Port capacity, services processing, optics, licenses and support are separate unless the exact manufacturer BOM lists them.US$ 48,600.00
Condition: New Factory Sealed
SRX5800E-BASE-DC is standard-midplane SRX5800E base system with high-capacity DC power. The DC platform distributes load by chassis zone and requires exact mapping of cards, PEMs, breakers and cooling. This is a modular base or system configuration. Port capacity, services processing, optics, licenses and support are separate unless the exact manufacturer BOM lists them.US$ 48,500.00
Condition: New Factory Sealed
SRX5800X-CHAS is enhanced-midplane SRX5800 spare chassis. The chassis spare excludes fan trays and is not a complete firewall; power supplies, routing engines, switch-control boards, processing and interface cards require a separate BOM. This is a chassis component, not a complete operational firewall. Missing power, cooling, control, processing and interface assemblies must be ordered and validated separately.US$ 13,500.00
- 1
- 13
- 14
- 15
- 16
- 17
- 23