Brand procurement
Browse H3C products for H3C campus and data center switching, routers, wireless access points, controllers and network modules. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.

Recently updated

H3C documents WA2620i-AGN with two 2.4 GHz antenna feed ports and two 5 GHz antenna feed ports. It has one Gigabit Ethernet uplink supporting 802.3af PoE and a separate 48 V DC local power input.

The WA5530 is an indoor 802.11ac Wave 2 access point with three radios operating in the 2.4 GHz and 5 GHz bands. Its wired interfaces are two Gigabit Ethernet ports, not multi-gigabit uplinks.

This EWP-WA5620i-ACN-FIT listing describes the H3C WA5620i-ACN dual-radio 802.11ac access point with internal antennas, one 2.5GE port and one GE port. The installation guide recommends 802.3at PoE+ to avoid 802.3af operating restrictions.

EWP-WX2560H is the H3C WX2560H wireless controller. Its hardware guide lists two Gigabit copper WAN ports, six Gigabit copper LAN ports and two SFP connections that share combo interfaces with corresponding copper ports.

EWP-WX2510H-PWR is the H3C WX2510H-PWR wireless controller with one Gigabit WAN port and four Gigabit PoE+ LAN ports. H3C lists a maximum of 16 managed APs and zero default managed-AP capacity.

This listing is for the WA5320H wall-plate access point under the existing EWP-WA5320H-FIT order reference. H3C documents a dual-radio 802.11ac model with a rear Gigabit PoE uplink, three front Gigabit ports and RJ-45 pass-through connections.

EWP-WA6330-FIT is the H3C WA6330 six-stream, triple-radio Wi-Fi 6 FIT access point with internal antennas. It has a 2.5GbE-capable PoE input and a separate Gigabit Ethernet port with PoE output.

EWP-WA6320-FIT identifies the H3C WA6320 indoor Wi-Fi 6 FIT access point. It uses internal antennas and two 2×2 radios, one at 2.4 GHz and one at 5 GHz, with a Gigabit Ethernet PoE input.
H3C buyers should validate exact regional model and software feature set, port speed, PoE and uplink requirements, controller, license and mounting compatibility. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: Exact chassis, antenna kit and condition verified before quotation acceptance
H3C documents WA2620i-AGN with two 2.4 GHz antenna feed ports and two 5 GHz antenna feed ports. It has one Gigabit Ethernet uplink supporting 802.3af PoE and a separate 48 V DC local power input.US$ 126.00
Condition: Regional article, condition and supplied accessories confirmed by quotation
The WA5530 is an indoor 802.11ac Wave 2 access point with three radios operating in the 2.4 GHz and 5 GHz bands. Its wired interfaces are two Gigabit Ethernet ports, not multi-gigabit uplinks.US$ 411.00
Condition: Regional article, condition and power accessories confirmed by quotation
This EWP-WA5620i-ACN-FIT listing describes the H3C WA5620i-ACN dual-radio 802.11ac access point with internal antennas, one 2.5GE port and one GE port. The installation guide recommends 802.3at PoE+ to avoid 802.3af operating restrictions.US$ 822.00
Condition: Condition, AP entitlement and supplied accessories confirmed on quotation
EWP-WX2560H is the H3C WX2560H wireless controller. Its hardware guide lists two Gigabit copper WAN ports, six Gigabit copper LAN ports and two SFP connections that share combo interfaces with corresponding copper ports.US$ 863.00
Condition: Installed AP licenses, condition and supplied power adapter verified by quotation
EWP-WX2510H-PWR is the H3C WX2510H-PWR wireless controller with one Gigabit WAN port and four Gigabit PoE+ LAN ports. H3C lists a maximum of 16 managed APs and zero default managed-AP capacity.US$ 360.00
Condition: Exact supplied unit, condition and mounting items confirmed on quotation
This listing is for the WA5320H wall-plate access point under the existing EWP-WA5320H-FIT order reference. H3C documents a dual-radio 802.11ac model with a rear Gigabit PoE uplink, three front Gigabit ports and RJ-45 pass-through connections.US$ 176.00
Condition: Exact regional unit and accessories verified before purchase
EWP-WA6330-FIT is the H3C WA6330 six-stream, triple-radio Wi-Fi 6 FIT access point with internal antennas. It has a 2.5GbE-capable PoE input and a separate Gigabit Ethernet port with PoE output.US$ 411.00
Condition: Condition and supplied accessories confirmed by quotation
EWP-WA6320-FIT identifies the H3C WA6320 indoor Wi-Fi 6 FIT access point. It uses internal antennas and two 2×2 radios, one at 2.4 GHz and one at 5 GHz, with a Gigabit Ethernet PoE input.US$ 253.00
Condition: New Factory Sealed
H3C EWP-WA4320-ACN-C-FIT is the Fit-mode order code for the WA4320-ACN-C dual-radio IEEE 802.11a/b/g/n/ac wireless access point.US$ 126.00
Condition: New Factory Sealed
EWP-WA5320-C-FIT is the Fit ordering variant of H3C WA5320-C, a dual-radio 802.11ac Wave 2 indoor access point with two PoE-capable Gigabit Ethernet interfaces.US$ 160.00