H3C EWP-WX2560H Wireless Controller with Gigabit Combo Interfaces
- 763 412 7282
- +86 010 69614620
EWP-WX2560H Overview
Count combo interfaces correctly
The WX2560H has eight copper Ethernet connections, but its two SFP positions do not create two additional independent interfaces. Each SFP position forms a combo interface with a corresponding copper port. Prepare a port schedule that selects the needed medium for those shared interfaces and checks compatible transceivers separately.
Separate AP control from AP power
H3C’s PoE compatibility table marks WX2560H as not supporting PoE. Plan a suitable external power source for the access points instead of transferring the PoE capability of WX2510H-PWR to this model.
Check licensing and operating limits
The manufacturer comparison lists zero default managed APs, a maximum of 128 managed APs and 256 configured APs. Confirm the installed entitlement and controller/AP software compatibility; a hardware maximum is not proof that licenses are included. Record the forwarding design and expected load for review rather than treating a published maximum as a performance guarantee.
Confirm the delivered chassis
Match the quoted article to EWP-WX2560H, not LI or WiNet variants, and confirm condition, mounting items and support eligibility. Have the site team verify the actual power input from the offered unit and model-specific installation documentation.
Manufacturer evidence: WX2560H installation guide, ports and combo arrangement; PoE compatibility restrictions; Controller capacity comparison; Exact model/code mapping.
EWP-WX2560H Specification
| Product code | EWP-WX2560H |
|---|---|
| Copper WAN / LAN | 2 GE WAN and6 GE LAN |
| Fiber connection | 2 GE SFP, shared combo interfaces |
| PoE | Not supported on WX2560H |
| Default / maximum managed APs | 0 default; maximum128 with appropriate licenses |
| Maximum configured APs | 256 |
| Deployment check | Exact chassis, entitlement, transceivers and software compatibility |
EWP-WX2560H Warranty
 | Product Quotation |  | Condition and Packaging |
 | Return Eligibility |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
EWP-WX2560H FAQ
What is EWP-WX2560H?
H3C EWP-WX2560H Wireless Controller with Gigabit Combo Interfaces is a H3C Wireless product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What are the power requirements for EWP-WX2560H?
For EWP-WX2560H, the manufacturer specification lists poe as Not supported on WX2560H.
Is EWP-WX2560H available from YYST Global?
Contact YYST Global to confirm availability for EWP-WX2560H, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
What is the price of EWP-WX2560H?
The current reference price for EWP-WX2560H is US$ 863.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products
Related EWP-WX2560H
C9115AXE-EWC-Q - Cisco Catalyst 9115AXE External-Antenna Wi-Fi 6 Access Point
C9115AXE-EWC-Q is the external-antenna Catalyst 9115 Wi-Fi 6 AP with Embedded Wireless Controller software and the -Q regulatory domain. Antennas are sold separately and must be approved for the country and RF design.
C9130AXI-EWC-D Cisco Catalyst 9130AX Series APs Dual-band, 802.11ax
C9130AXI-EWC-D is the Cisco Catalyst 9130 internal-antenna EWC access-point order. The D domain is recommended for India, subject to separate approval checks. Evaluate its embedded-controller lifecycle, negotiated power and intended software mode before procurement.
C9130AXI-EWC-G - Cisco Catalyst 9130 Indoor 802.11ax Access Points
C9130AXI-EWC-G is a Cisco indoor Wi-Fi 6 AP with internal antennas and Embedded Wireless Controller. Its G regulatory-domain platform is recommended for Pakistan; approval must be checked separately. The exact EWC order is end of sale, with support subject to eligible terms.
R4H38A HPE Aruba 577 (USF1) Dual Radio 2x2/4x4 Wi‑Fi 6 Access Point
R4H38A is HPE Aruba Networking's AP-577 USF1 TAA outdoor Wi-Fi 6 order with internal directional antennas. The mount determines where the chassis points: HPE recommends H1 for wall mounting with tilt, while V1A and V2 point this model down. E0 supports 2.5Gbps and E1 supports 1Gbps. Specify the approved destination, mounting orientation and PoE configuration when requesting a quote.
JW473AAE Aruba LIC-PEF controller PEF per AP license E-LTU
JW473AAE is the HPE Aruba Networking LIC-PEF controller Policy Enforcement Firewall per-AP E-LTU software license. It enables context-based access policies on the controller; no AP or controller hardware is supplied. Quote the AP quantity, controller release and existing entitlements.
JW474AAE Aruba LIC-RFP controller RF protect per AP license E-LTU
JW474AAE is the HPE Aruba Networking LIC-RFP controller RFProtect per-AP software license, supplied as E-LTU. RFProtect adds spectrum analysis and wireless intrusion protection; this order does not supply an access point or controller. Quote the AP count and existing license inventory.
R4W30A HPE Aruba Networking AP-575EX EG Wi-Fi 6 Hazardous Location Access Point
R4W30A identifies the HPE Aruba Networking AP-575EX EG order with internal omnidirectional antennas and dual-radio Wi-Fi 6. E0 supports 2.5Gbps and E1 supports 1Gbps; both can receive PoE. Confirm the power configuration and separately selected mounting bracket with the quote. Listed power injectors must remain outside classified areas, and the exact installation requires approval.
R4H07A HPE Aruba Networking AP-518 RWF1 TAA Hardened Wi-Fi 6 Access Point
R4H07A is the HPE Aruba Networking AP-518 RWF1 TAA order: a hardened Wi-Fi 6 access point with four external antenna connections for 5 GHz and two for 2.4 GHz. Its E0 SmartRate uplink reaches 2.5Gbps; E1 reaches 1Gbps. PoE supplies power, and the power source is sold separately. Request a quote with the deployment country and antenna plan.