The installation guide identifies four external antenna feed connections: two for 2.4 GHz and two for 5 GHz. This is not evidence of an internal omnidirectional antenna assembly. Ask for the offered antenna kit and connector arrangement to be matched to the installation before ordering.
The single 10/100/1000 Ethernet connection is also the 802.3af PoE input. The alternative local power input is 48 V DC. A console interface is provided; the guide restricts its FIT-mode use to maintenance debugging. Do not assume that a console connection replaces the normal controller-management path.
Record the full EWP-WA2620i-AGN article, chassis label, installed software and existing controller when requesting a replacement. Have the supplier confirm accessories and compatibility. Do not transfer dimensions, antenna design or capacity figures from a WA2620i-AGN-X listing without model-specific evidence.
H3C WA2620i-AGN installation guide, Appendix A documents the model interfaces and radio standards. Exact supplied article and condition require confirmation.
| Listing / model | EWP-WA2620i-AGN / WA2620i-AGN |
|---|---|
| 2.4 GHz connections | Two antenna feed ports; 802.11b/g/n |
| 5 GHz connections | Two antenna feed ports; 802.11a/n |
| Uplink | One 10/100/1000 Ethernet port |
| Power | 802.3af PoE or local 48 V DC |
| Console | Present; FIT-mode maintenance restriction applies |
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
H3C EWP-WA2620i-AGN 802.11n Access Point with Antenna Feed Ports is a H3C accessory or component in the Wireless category. It may require a compatible main device and should not be treated as a complete standalone system.
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
The current reference price for EWP-WA2620i-AGN is US$ 126.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products

The WA5530 is an indoor 802.11ac Wave 2 access point with three radios operating in the 2.4 GHz and 5 GHz bands. Its wired interfaces are two Gigabit Ethernet ports, not multi-gigabit uplinks.

This EWP-WA5620i-ACN-FIT listing describes the H3C WA5620i-ACN dual-radio 802.11ac access point with internal antennas, one 2.5GE port and one GE port. The installation guide recommends 802.3at PoE+ to avoid 802.3af operating restrictions.

This listing is for the WA5320H wall-plate access point under the existing EWP-WA5320H-FIT order reference. H3C documents a dual-radio 802.11ac model with a rear Gigabit PoE uplink, three front Gigabit ports and RJ-45 pass-through connections.

EWP-WA6330-FIT is the H3C WA6330 six-stream, triple-radio Wi-Fi 6 FIT access point with internal antennas. It has a 2.5GbE-capable PoE input and a separate Gigabit Ethernet port with PoE output.

EWP-WA6320-FIT identifies the H3C WA6320 indoor Wi-Fi 6 FIT access point. It uses internal antennas and two 2×2 radios, one at 2.4 GHz and one at 5 GHz, with a Gigabit Ethernet PoE input.

EWP-WX2560H is the H3C WX2560H wireless controller. Its hardware guide lists two Gigabit copper WAN ports, six Gigabit copper LAN ports and two SFP connections that share combo interfaces with corresponding copper ports.

EWP-WX2510H-PWR is the H3C WX2510H-PWR wireless controller with one Gigabit WAN port and four Gigabit PoE+ LAN ports. H3C lists a maximum of 16 managed APs and zero default managed-AP capacity.

AIR-ANT2566P4W-RS is a self-identifying four-element patch antenna with 6 dBi gain in both 2.4 and 5 GHz bands. It is not a WLAN controller.