Wireless - Page 3

Condition: New Factory Sealed

C9105AXW-I is a Cisco Catalyst 9105AX wall-plate access point order for indoor use. See the verified interface, replacement and lifecycle boundaries before requesting a quote.

Condition: New Factory Sealed

AIR-WLC2125-K9 is a Cisco 2100 Series controller for up to 25 access points, with eight Fast Ethernet ports including two PoE ports. Cisco support ended on May 31, 2017; verify the legacy AP and software environment before reuse.

Condition: New Factory Sealed

AIR-AP1815T-A-K9 is the A-domain Cisco Aironet 1815t OfficeExtend access point with dual-band 2x2 radios. It uses a local power adapter; LAN 1 supplies PoE output and LAN 3 is reserved for local management.

Condition: New Factory Sealed

AIR-CT2504-25-K9 is a physical Cisco 2504 wireless controller supplied with capacity for 25 access points. It has four Gigabit Ethernet ports; Cisco support for this legacy platform ended on April 30, 2023.

Condition: New Factory Sealed

C9105AXW-F is the F regulatory-domain Cisco Catalyst 9105AX wall-plate Wi-Fi 6 access point. It combines internal antennas, a 2.5G-capable uplink and three Gigabit downlinks; verify country approval and controller software for the actual hardware revision.

Condition: New Factory Sealed

Cisco C9105AXW-B is the B-domain wall-plate Catalyst 9105AX access point. The platform uses 2x2 MIMO with two spatial streams, a multigigabit uplink and three Gigabit downlinks; destination-country approval must match the full regulatory-domain order.

Condition: New Factory Sealed

AirEngine 6760-X1E is a Huawei Wi-Fi 6 AP with external antennas, one 10GE electrical port, one GE electrical port and one 10GE SFP+ interface. Its base and RTU-upgraded radio configurations differ; verify the license and antenna configuration before ordering.

Condition: New Factory Sealed

AirEngine 5762-13W is a Huawei Wi-Fi 6 wall-plate access point with simultaneous 2.4 GHz and 5 GHz radios, each using 2×2 MIMO and two spatial streams. Huawei specifies 802.3af by default and 802.3at when USB is required.

Condition: New Factory Sealed

Fortinet FAP-421E is an indoor 802.11ac access point with two radios, eight internal antennas, two Gigabit Ethernet ports and IEEE 802.3at PoE.

Condition: New Factory Sealed

AirEngine 5762S-11 Dimensions without packaging (H x W x D) [mm(in.)]: Diameter x depth: 180 mm x 35 mm (7.09 in. x 1.38 in.); Dimensions with packaging (H x W x D) [mm(in.)]: 95 mm x 280 mm x 250 mm (3.74 in. x 11.02 in. x 9.84 in.); Weight without packaging [kg(lb)]: 0.510 kg (1.124 lb).

Condition: New

JW635A is the Aruba 7005 RW FIPS/TAA-designated mobility controller. HPE lists this exact ordering code with four Gigabit ports and a 16-AP/1K-client designation; the separate 7005 installation guide provides the 1,024-user hardware reference. Confirm deployment mode and licenses before sizing.

Condition: New

JW634A identifies the US-region Aruba 7005 controller with four Gigabit copper ports. Its official ordering description uses a 16-AP/1K-client designation; use the separate installation guide and licensed deployment limits for capacity planning.

Condition: New

JW638A is the Aruba 7005 IL-region controller carrying the FIPS/TAA designation. HPE lists four Gigabit copper ports and a 16-AP/1K-client ordering description; confirm software, licenses and the intended deployment before sizing.

Condition: New

R7J46A identifies the HPE Aruba Networking AP-615-EG campus access point with internal antennas and a dual-radio, tri-band 2x2 Wi-Fi 6E design. Confirm the EG variant and permitted radio configuration for the deployment location.

Condition: Entitlement confirmed by quotation

L09-0001-SG00 is a RUCKUS management license for one AP on the specified SmartZone platforms, not wireless hardware. The cited ordering reference lists SZ-100, vSZ 3.X, SCG200 and SZ300, for software from version 3.2.

Condition: Entitlement confirmed by quotation

909-0001-ZD12 adds one AP license to a RUCKUS ZoneDirector 1200 controller; it is not an access point or controller appliance. The documented expansion ceiling depends on the controller software release.

Condition: Condition confirmed by quotation

HP J9421A is the MSM760 Access Controller for an MSM wireless network, not an access or aggregation switch. It has two 10/100/1000 RJ-45 Ethernet ports and an RJ-45 serial console. HPE announced end of sale for June 30, 2017.

Condition: License availability and entitlement confirmed by quotation

HP J9698AAE is the MSM720 Premium electronic license, not a controller or access point. This legacy ordering code appears in HPE's end-of-sale notice; confirm current entitlement and activation eligibility before ordering.

Condition: New Factory Sealed

R3K00ACM identifies the Aruba CM AP-AC2-12B external desktop AC/DC adapter. It is a power accessory, not Wi-Fi hardware. Verify the exact unit rating and connection before replacement.

Condition: New Factory Sealed

JX990ACM is the Aruba CM AP-AC-12V30B desktop AC/DC power adapter. HPE lists this accessory at 12 V/30 W in its Aruba 510 Series reference; it is not an access point.