Wireless - Page 2

Condition: New Factory Sealed

Huawei AP7060DN is an indoor 802.11ax AP with 4x4/8x8 radios and 10GE plus GE copper interfaces. Verify power, management compatibility and optional IoT accessories before ordering.

Condition: New Factory Sealed

Huawei AirEngine 5760-22W combines a 2.5GE copper uplink, four GE downlinks and GE/10GE SFP+. Optical uplink use and PoE input mode change radio capacity and peripheral power availability.

Condition: New Factory Sealed

Huawei AirEngine 5760-51 offers 5GE copper and RTU-dependent Wi-Fi 6 radio layouts. Verify the hardware code, loaded RTU and power mode; 802.3at limits the 5GE uplink to 2.5GE or below.

Condition: New Factory Sealed

Huawei AirEngine 6760R-51 is a directional outdoor Wi-Fi 6 AP with 5GE copper and GE/10GE SFP+. Compare 802.3bt full operation with 802.3at radio and combo-port limits before selecting the uplink.

Condition: New Factory Sealed

AirEngine 5761R-11 is an AirEngine 5700 outdoor Wi-Fi 6 AP with directional antennas, Gigabit copper and Gigabit SFP. Under 802.3af, only one wired interface is active, with optical priority.

Condition: New Factory Sealed

AirEngine 6761-21T has three Wi-Fi 6 radios. Check the hardware part number: 02353XBQ has two Gigabit ports; 02354VQH has 2.5 Gigabit plus Gigabit. 802.3af reduces radio and interface capability.

Condition: New Factory Sealed

AirEngine 5761S-11 is a single-Gigabit-port indoor Wi-Fi 6 AP with dual-band 2x2 radios and BLE 5.2. Check PoE mode before using USB; 802.3af imposes feature restrictions.

Condition: New Factory Sealed

AirEngine 5761S-11W combines five Gigabit Ethernet ports, a separate RJ-45 pass-through pair and dual-band 2x2 Wi-Fi 6. USB is disabled with 802.3af input; this model has no PoE output.

Condition: New Factory Sealed

AirEngine 5762S-11SW has one Gigabit Ethernet port and uses up to 11 W from 802.3af PoE. This wall-box Wi-Fi 6 AP includes BLE 5.0 but no second Ethernet socket, USB or PoE output.

Condition: New Factory Sealed

AirEngine 5762S-12SW provides one Gigabit uplink and one downlink in an 86 mm wall plate. Confirm standalone host 50084977 versus a multi-AP kit, and distinguish the 2.975 Gbit/s radio rate from wired throughput.

Condition: New Factory Sealed

AirEngine 5762-12SW fits an 86 mm wall box and combines two Gigabit ports with dual-band 2x2 Wi-Fi 6. It uses 802.3af PoE and includes BLE 5.0, but has no USB or PoE output.

Condition: New Factory Sealed

AirEngine 5761-12W provides wall-plate Wi-Fi 6 and up to 11 W PoE output. Check input power carefully: 802.3af disables USB and PoE output, while 802.3at allows only one at a time.

Condition: New Factory Sealed

AirEngine 5761S-10W is a dual-band 2x2 Wi-Fi 6 wall-plate AP with five Gigabit ports. It accepts 802.3af PoE or 12 V DC, but provides no PoE output or Bluetooth BLE.

Condition: New Factory Sealed

AC6507S provides ten GE and two 10GE SFP+ interfaces for WLAN control. Confirm the offered mainframe code, AC/DC adapter and separately listed AP resource licenses.

Condition: New Factory Sealed

AirEngine 9700-M combines GE, 10GE and 40GE interfaces with a port-sharing restriction. Verify separate power modules and AP licenses for the offered mainframe.

Condition: New Factory Sealed

C9130AXI-EWC-Q is a Japan-listed internal-antenna EWC access point. Review Q-domain W56 requirements, controller mode and the EWC support timeline before deployment.

Condition: New Factory Sealed

C9130AXI-EWC-T is an internal-antenna C9130AX access point with an Embedded Wireless Controller order. Verify country approval and the EWC lifecycle before deployment.

Condition: New Factory Sealed

WS-SVC-WISM2-1-K9 is a Cisco WiSM2 controller module order for up to 100 access points in a compatible Catalyst 6500 chassis. Cisco support ended April 30, 2022.

Condition: New Factory Sealed

C9105AXW-Z is the Cisco Catalyst 9105AX wall-plate access point carrying regulatory suffix -Z. See the verified interface, replacement and lifecycle boundaries before requesting a quote.

Condition: New Factory Sealed

C9105AXW-A is the Cisco Catalyst 9105AX wall-plate access point with regulatory suffix -A. See the verified interface, replacement and lifecycle boundaries before requesting a quote.