FAP-C24JE is a FORTINET wireless networking hardware listed by YYST Global for campus WLAN expansion, controller replacement, access point rollout and wireless refresh projects. This page is intended for buyers comparing replacement parts, project supply, spare inventory and quote options.
YYST Global helps enterprise customers confirm model information, product category, condition, availability and sourcing route before purchase. For time-sensitive projects, send the model number and required quantity so our sales team can check stock, lead time and compatible alternatives.
Product name: FAP-C24JE - Fortinet FortiAP Access Points 2x2 802.11ac Wave 2. Category: FortiAP Standard Access Points. Condition: New Factory Sealed.
| Datasheet series | Fortinet FortiAP Access Points |
| Exact model | FAP-C24JE |
| Management check | Confirm FortiGate/FortiWLC/FortiCloud management mode and firmware compatibility |
| Official datasheet | Fortinet FortiAP official product documentation |
| Hardware | |
| Indoor/Outdoor Deployment | Wall Plate AP |
| Number of Radios | 2 |
| Number of Antennas | 4 Internal |
| Antenna Type and Peak Gain | Chip: 1.5 dBi for 2.4 GHz, 2 dBi for 5 GHz |
| Frequency Bands (GHz)* | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
| Radio 1 Capabilities | 2.4 GHz b/g/n (2x2:2 stream) 20/40 MHz (64 QAM) |
| Radio 2 Capabilities | 5 GHz a/n/ac (2x2:2 stream) 20/40/80 MHz (256 QAM) |
| Maximum Data Rate | Radio 1: up to 300 Mbps |
| Radio 2: up to 867 Mbps | |
| Bluetooth Low Energy (BT/BLE) Radio | — |
| Interfaces | 6x 10/100/1000 Base-T RJ45 Ports (1x 802.3at PoE (PD), 1x 802.3af PoE (PSE), 2x Non-PoE Ports, 1x Pass-through in, 1x Pass-through out, 1x RS-232 RJ45 Serial Port |
| Serial Console Port | 1x RJ45 RS232 |
| Power over Ethernet (PoE) | 802.3af (max PSE output of 4W) or 802.3at (full 802.3af PSE output) |
| Simultaneous SSIDs | Up to 16 |
| EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
| User/Device Authentication | WPA and WPA2 with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
| Maximum Tx Power | 23 dBm / 100mW (2 chains combined)* |
| Kensington Lock | No |
| IEEE Standards | 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at, 802.3az |
| SSID Types Supported | Local-Bridge, Tunnel |
| Per Radio Client Capacity | Up to 64 |
| Cellular Co-existence | No |
| LED Off Mode | Yes |
| Advanced 802.11 Features | |
| 802.11ac Wave 2 MU-MIMO | Yes |
| Transmit Beam Forming (TxBF) | Yes |
| Low-Density Parity Check (LDPC) Encoding | Yes |
| Maximum Likelihood Demodulation (MLD) | Yes |
| Maximum Ratio Combining (MRC) | Yes |
| A-MPDU and A-MSDU Packet Aggregation | Yes |
| MIMO Power Save | Yes |
| Short Guard Interval | Yes |
| Wireless Monitoring Capabilities | |
| Rogue Scan Radio Modes | Background, Full-time |
| WIPS / WIDS Radio Modes | Background, Full-time |
| Packet Sniffer Mode | No |
| Spectrum Analyzer | No |
| Dimensions | |
| Length x Width x Height | 6.69 x 4.04 x 1.08 inches (170 x 102.5 x 27.5 mm) |
| Weight | 1.3 lbs (0.6 kg) |
| Package (shipping) Weight | 1.6 lbs (0.74 kg) |
| Mounting Options | Wall Plate |
| Included Accessories | Mounting kit for Wall Plate |
| Environment | |
| Power Supply | GPI-115, or GPI-130 |
| Power Consumption (Max.) | Depends on PoE connected |
| Humidity | 5% to 90% non-condensing |
| Operating Temperature | 32 to 104°F (0–40°C) |
| Storage Temperature | -4 to 158˚F (-20 to 70˚C) |
| Directives | Low Voltage Directive • RoHS2 |
| UL2043 Plenum Material | No |
| Mean Time Between Failures | >10 Years |
| IP Rating | — |
| Surge Protection Built In | — |
| Hit-less PoE Failover | No |
| Certifications | |
| WiFi Alliance Certified | No |
| DFS | In Process |
| Certifications | |
| Limited Lifetime Warranty | Yes |
Product Quotation | ![]() | Condition and Packaging | |
Return Eligibility | Returns and Replacement | ||
Shipping Arrangements | ![]() | Warranty Terms |
FAP-C24JE - Fortinet FortiAP Access Points 2x2 802.11ac Wave 2 is a FORTINET FortiAP Standard Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
For FAP-C24JE, the manufacturer specification lists number of radios as 2.
Contact YYST Global to confirm availability for FAP-C24JE, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
The current reference price for FAP-C24JE is US$ 200.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products

FAP-223E is a dual-radio 2x2:2 indoor FortiAP with four external RP-SMA antennas, one Gigabit Ethernet interface, 802.3af PoE and radio rates up to 400 plus 867 Mbps.

FAP-221E is a dual-radio 2x2:2 indoor FortiAP with four internal antennas, one Gigabit Ethernet interface, 802.3af PoE and aggregate radio rates up to 400 plus 867 Mbps.

FWF-60E-DSJ-BDL-980-DD is the exact retained Fortinet term-controlled order code historically labeled as Fortinet 60E bundle order in the FortiCare support family. Only the complete SKU, historical label and encoded term are asserted; covered scope, metric, region, activation and service commitments require the current authorized quotation.

FAP-223E-D is a Fortinet FortiAP 223E wireless access point ordering variant. The 223E uses external antennas for its 2.4GHz and 5GHz radios and a LAN/PoE connection; it is not the internal-antenna 221E model.

FAP-221E-V is the regulatory-domain-V orderable variant of the Fortinet FortiAP-221E indoor 802.11ac Wave 2 access point. Confirm the deployment country before ordering.

FAP-221E-T is the regulatory-domain-T orderable variant of the Fortinet FortiAP-221E indoor 802.11ac Wave 2 access point. Confirm the deployment country before ordering.

FAP-221E-D is the regulatory-domain-D orderable variant of the Fortinet FortiAP-221E indoor 802.11ac Wave 2 access point. Confirm the deployment country before ordering.

FAP-431F-N is an N regulatory-domain FortiAP 431F. Fortinet assigns N only to its listed markets for this generation; the United States uses A, and the hard-coded code cannot be converted after receipt.