Enterprise IT Network Hardware Products - Page 295

Condition: New Factory Sealed

S6730-H24X6C is a Huawei CloudEngine S6700-series switch with 24 x 10GE SFP+ and six QSFP28 interfaces. The effective 40GE or 100GE behavior of the QSFP28 ports depends on the exact part number, factory software and license state, so the model name alone is not enough for procurement.

Condition: New Factory Sealed

AirEngine 5760-10 is a Huawei indoor Wi-Fi 6 access point with 2x2 MIMO, simultaneous 2.4 GHz and 5 GHz service, built-in Smart Antennas and a maximum published device rate of 1.774 Gbit/s.

Condition: New Factory Sealed

AP7050DE is a Huawei AP7000-series indoor wireless access point. Huawei's official software documentation explicitly lists AP7050DE for Fit/Fat mode switching and built-in Bluetooth broadcast functions; software release, controller and regional deployment requirements must be checked before reuse.

Condition: New Factory Sealed

S5735-L24T4S-A is a non-PoE Huawei CloudEngine S5735-L campus switch with 24 10/100/1000BASE-T access ports and four GE SFP uplinks. The T model should not be confused with the S5735-L24P4S-A PoE+ variant or a later V2 PID.

Condition: New Factory Sealed

C1-C4500X-F-32SFP+ is the Cisco ONE Catalyst 4500-X 32-port 10G IP Base switch with back-to-front airflow. Cisco ended support for this platform on October 31, 2025.

Condition: New Factory Sealed

FWF-51E is the Fortinet FortiWiFi 51E desktop security appliance with integrated dual-band wireless, two GE RJ45 WAN ports, five GE RJ45 switch ports and 32 GB of onboard SSD storage.

Condition: New Factory Sealed

AIR-AP1832I-B-K9 is the B regulatory-domain, controller-based Cisco Aironet 1832i indoor access point. Cisco describes this exact PID as an 802.11ac Wave 2, 3x3:2 spatial-stream model with internal antennas and identifies B as the US regulatory domain in its lifecycle notice.

Condition: New Factory Sealed

AIR-AP1832I-E-K9C is the E regulatory-domain Cisco Aironet 1832i configurable PID shipped with a Mobility Express software image by default. It uses internal antennas and dual-band 3x3 MIMO with two spatial streams; country approval and the desired controller role must be checked before purchase.

Condition: New Factory Sealed

AIR-AP1832I-D-K9 is the D regulatory-domain, controller-based Cisco Aironet 1832i indoor access point. Cisco's published D-domain table lists eleven 2.4 GHz channels and two separate 5 GHz ranges; country approval and controller compatibility must be confirmed before deployment.

Condition: New Factory Sealed

AIR-AP1832I-C-K9 is a controller-based Cisco Aironet 1832i indoor access point with internal antennas, 802.11ac Wave 2 operation, 3x3 MIMO and two spatial streams. The C identifies its regulatory domain; this K9 PID is not the K9C Mobility Express default-software model.

Condition: New Factory Sealed

AIR-AP1832I-K-K9 is the K regulatory-domain Cisco Aironet 1832i controller-based indoor AP. Cisco documents thirteen 2.4 GHz channels and three distinct 5 GHz channel groups for K-domain hardware; deployment approval and the exact controller release must be verified.

Condition: New Factory Sealed

AIR-AP1832I-S-K9 is the S regulatory-domain, controller-based Cisco Aironet 1832i indoor access point. Cisco documents 13 channels at 2.4 GHz and three 5 GHz channel groups for S-domain hardware; country approval and controller software must be verified.

Condition: New Factory Sealed

AIR-AP1832I-R-K9 is the R regulatory-domain Cisco Aironet 1832i controller-based indoor access point. It has internal antennas, dual-band 3x3 MIMO with two spatial streams and 802.11ac Wave 2 operation; country approval and controller compatibility must be verified before deployment.

Condition: New Factory Sealed

AIR-AP1832I-Q-K9 is the Q regulatory-domain, controller-based Cisco Aironet 1832i indoor access point. It uses internal antennas and dual-band 3x3 MIMO with two spatial streams; the Q-domain channel plan and country approval must be verified before deployment.

Condition: New Factory Sealed

N9K-C9504 is the 7RU Cisco Nexus 9504 modular chassis with four line-card slots and capacity for redundant supervisors, system controllers, fabric modules, fan trays and power supplies selected separately.

Condition: New Factory Sealed

AIR-AP1832I-E-K9 is the E regulatory-domain, controller-based Cisco Aironet 1832i indoor access point with internal antennas, 802.11ac Wave 2 and 3x3 MIMO with two spatial streams.

Condition: New Factory Sealed

N5K-C5672UP-16G is the Cisco Nexus 5672UP-16G 1RU switch with 48 fixed SFP+ ports, including 24 unified ports that support 2/4/8/16-Gbps Fibre Channel, plus six 40GbE QSFP+ ports. Cisco lists its hardware support end date as May 31, 2026.

Condition: New Factory Sealed

N9K-C93180YC-FX is a 1RU Cisco Nexus 9300-FX switch with 48 x 1/10/25G SFP28 downlinks, six 40/100G QSFP28 uplinks, unified-port Fibre Channel capability and MACsec support.

Condition: New Factory Sealed

C1-N3K-C3232C is Cisco's ONE ordering PID for the Nexus 3232C, a 1U data center switch with 32 QSFP28 ports. The hardware supports native 100 Gigabit Ethernet and breakout modes; the exact software entitlement, airflow, power supplies and optics must be confirmed for the order.

Condition: New Factory Sealed

C1-N3K-C3172PQ is the Cisco ONE ordering PID for a Nexus 3172PQ platform with 48 SFP+ ports and six QSFP+ ports. It is the standard-memory 3172PQ variant, not the C1-N3K-C3172PQ-XL extended-memory model.