Condition: New Factory Sealed

AIR-ANT2422SDW-R is a very short white indoor 2.4 GHz omnidirectional antenna with 2.5 dBi peak gain and an RP-TNC connector. It measures 1.7 inches long.

Condition: New Factory Sealed

AIR-ANT5140V-N is a direct-mount 5 GHz omnidirectional antenna for Cisco mesh access points. It covers 5.25-5.875 GHz, provides 4 dBi gain and uses an N-male connector without an attached cable.

Condition: New Factory Sealed

AIR-ANT2547V-N is a direct-mount outdoor dual-band omnidirectional antenna with 4 dBi gain at 2.4 GHz and 7 dBi at 5 GHz. It uses an N-male connector and is rated IP66/IP67.

Condition: New Factory Sealed

AIR-ANT25137NP-R is one Cisco six-element dual-band MIMO patch-array antenna with 13 dBi gain at 2.4 GHz and 7 dBi at 5 GHz. It includes 36-inch RP-TNC male leads and an IP65-rated radome.

Condition: New Factory Sealed

AIR-ANT2422DB-R is a legacy black swivel dipole antenna for 2.4 GHz Cisco Aironet radios. Cisco specifies 2.2 dBi gain and an RP-TNC connector.

Condition: New Factory Sealed

AIR-ANT2420V-N is a direct-mount 2.4 GHz omnidirectional antenna for Cisco mesh access points. It provides 2 dBi gain, uses an N-male connector and has no attached cable.

Condition: New Factory Sealed

AIR-ANT2450S-R is a legacy Cisco 2.4 GHz sector antenna rated at 5 dBi with a 135-degree sector pattern and RP-TNC connection. It is directional sector hardware, not an omnidirectional ceiling antenna.

Condition: New Factory Sealed

AIR-ANT24020V-R is a 2.4 GHz indoor diversity omnidirectional ceiling antenna with 2.2 dBi peak gain, two three-foot plenum-rated leads and RP-TNC connectors.

Condition: New Factory Sealed

AIR-ANT25137NP-R4 is Cisco's quantity-four order for the AIR-ANT25137NP-R six-element dual-band patch array. Each antenna is rated at 13 dBi for 2.4 GHz and 7 dBi for 5 GHz and uses RP-TNC male leads.

Condition: New Factory Sealed

AIR-ANT2566P4W-R is a four-element indoor/outdoor directional patch antenna with 6 dBi gain in both 2.4 GHz and 5 GHz bands. It uses four 36-inch plenum-rated RP-TNC male leads.

Condition: New Factory Sealed

AIR-ANT2451NV-R is a six-element low-profile indoor ceiling antenna covering 2.4 GHz and 5 GHz. Cisco specifies 2.5 dBi and 3.5 dBi peak gain, three-foot plenum-rated leads and RP-TNC plugs.

Condition: New Factory Sealed

AIR-ANT2451V-R is a four-element indoor omnidirectional antenna for 2.4 GHz and 5 GHz Cisco Aironet radios using RP-TNC connectors. It provides 2 dBi gain at 2.4 GHz and 3 dBi at 5 GHz.

Condition: New Factory Sealed

AIR-AP4800-Q-K9 is a Q-domain indoor 4x4:3 802.11ac Wave 2 analytics AP with internal Hyperlocation antenna array and multigigabit connectivity. Verify regulatory-domain approval, controller software, PoE, uplink, mounting or antenna design, and lifecycle before purchase.

Condition: New Factory Sealed

AIR-AP4800-A-K9 is a A-domain indoor analytics access point with integrated antennas, two client-serving radios, a separate listen-only analysis radio and multigigabit uplink. Verify regulatory-domain approval, controller software, PoE, uplink, mounting or antenna design, and lifecycle before purchase.

Condition: New Factory Sealed

AIR-AP4800-B-K9 is a B-domain indoor 802.11ac Wave 2 analytics access point with internal antennas, a 4x4:3 client radio design, location functions and multigigabit Ethernet. Verify regulatory-domain approval, controller software, PoE, uplink, mounting or antenna design, and lifecycle before purchase.

Condition: New Factory Sealed

AIR-AP3802E-Q-K9 is a Q-domain controller-based 802.11ac Wave 2 access point with modular external antennas, CleanAir and multigigabit Ethernet. Verify regulatory-domain approval, controller software, PoE, uplink, mounting or antenna design, and lifecycle before purchase.

Condition: New Factory Sealed

AIR-AP3802E-F-K9 is a controller-based 802.11ac Wave 2 access point with external-antenna connectors, CleanAir and a multigigabit uplink. Verify regulatory-domain approval, controller software, PoE, uplink, mounting or antenna design, and lifecycle before purchase.

Condition: New Factory Sealed

FAP-431G-V is the country-code V order form of the Fortinet FortiAP 431G indoor Wi-Fi 6E access point with three Wi-Fi radios, internal antennas, 4x4 MU-MIMO and dual 5GE ports. Verify country eligibility, software and PoE design before purchase.

Condition: New Factory Sealed

FAP-431G-T is the country-code T order form of the Fortinet FortiAP 431G indoor Wi-Fi 6E access point with three Wi-Fi radios, internal antennas, 4x4 MU-MIMO and dual 5GE ports. Verify country eligibility, software and PoE design before purchase.

Condition: New Factory Sealed

FAP-431G-N is the country-code N order form of the Fortinet FortiAP 431G indoor Wi-Fi 6E access point with three Wi-Fi radios, internal antennas, 4x4 MU-MIMO and dual 5GE ports. Verify country eligibility, software and PoE design before purchase.