AIRAP1832I-DK910C Cisco Aironet 1832i Dual-band Mobility Express AP

AIRAP1832I-DK910C exact order identity

AIRAP1832I-DK910C is a Cisco Aironet 1832i indoor access point with integrated antennas. This exact PID combines regulatory-domain token D with a legacy K910C Mobility Express procurement line. Cisco documents 802.11ac Wave 2, 3x3 MIMO with two spatial streams and a maximum 5-GHz PHY rate of 867 Mbps.

Integrated-antenna boundary

The 1832i antenna system is internal. No external antenna is selected by this access-point PID, so mounting location, orientation, ceiling construction and the post-install survey determine how the published platform is used.

Software and order boundary

Cisco's Aironet 1830 lifecycle bulletin lists each AIRAP1832I-xK910C PID as Cisco Aironet Mobility Express 1830 Series. The bulletin does not state the physical carton quantity for these K910C lines. Verify quantity, serial count and software role from the authorized quotation and received carton rather than expanding the suffix into an unsupported claim.

D regulatory-domain evidence

Cisco treats the letter as a regulatory-domain identifier and requires approval for the country of use; it is not a country name. For a D-domain spare, record the approved protected sites so it cannot be moved to a destination with a different domain requirement.

Treat this D-domain unit as location-controlled inventory. Name the destination or protected spare population, record who may reassign it and require a new Cisco lookup before any transfer. Commissioning should retain the controller country and enabled-channel outputs. This prevents an unused spare from appearing technically interchangeable after organizational or geographic changes.

Power and interface boundary

The AP supports 802.3af, 802.3at, Enhanced PoE, a local power supply and Cisco power injectors. Cisco lists a 15.4 W draw and states that USB is disabled when 802.3af is used. Record the negotiated power and the single Gigabit Ethernet uplink state.

Lifecycle decision

Cisco ended sale of the Aironet 1830 Series on 1 May 2022, ended software maintenance on 1 May 2023 and lists 30 April 2027 as the last support date. Cisco identifies Catalyst 9115AX as the migration family; available inventory does not extend these dates.

Deployment evidence worksheet

Controller join evidence

Stage the access point on the controller release intended for production. Retain the controller model, software version, discovery path, authorization method and first successful CAPWAP join. Confirm that configuration download completes and that both radios reach an expected operational state. Remove any temporary staging authorization before handover. This evidence separates an orderable access point from a unit that has actually been proven compatible with the planned controller environment. For the 1832i, retain the controller or Mobility Express role, software release, regulatory token and first successful join.

Mechanical installation record

List the bracket, ceiling or wall interface, enclosure requirement, safety restraint, service clearance and cable-entry plan before scheduling installation. Receiving should identify missing mechanical items before the access point reaches site. Photograph the mounted label and final cable entry, then record how the unit can be reached for replacement. A complete electronic order can still be an unusable deployment kit when mechanical dependencies are omitted. The 1832i supports common Cisco Aironet mounting brackets; preserve the exact bracket and ceiling or wall interface used at the site.

Serial-level asset control

Capture chassis serial, base MAC address, carton reference, deployment site, controller assignment and asset owner. Reconcile the identifiers against the purchase line before activation. Multi-unit cartons require an entry for every physical access point; a carton SKU alone cannot show which unit was installed, held as a spare or returned. This record is also needed to trace support entitlement, replacement history and monitoring ownership. For a K910C line, reconcile every received serial against the authorized carton quantity because Cisco's lifecycle description does not state that quantity.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Cisco makes the customer responsible for country approval; keep the dated compliance lookup with the 1832i serial and controller country.

Authentication path test

Commission representative clients through association, authentication, address assignment, DNS and application reachability. Preserve the identity policy used, test client type, result and relevant controller logs. An access point that joins its controller has not yet demonstrated the user path. Repeat the test after any controller, certificate or authentication-service change and retain failures separately from RF or switch-port evidence. Test association, authentication, DHCP, DNS and application reachability after the AP reaches its final controller or Mobility Express role.

Security baseline

Retain the approved controller policy, management authorization, certificate or trust workflow, client authentication test and logging destination. Confirm behavior on the deployed controller software instead of promising a protocol from the hardware family name. Remove temporary onboarding access and verify administrative reachability after handover. This keeps product identity separate from software-dependent security claims. Record which security functions are actually configured on the deployed controller release; do not present optional family capabilities as enabled facts.

Operational log retention

Store the initial controller events, switch-port state, radio assignment, channel list and client test results with a consistent asset identifier. Define how long commissioning evidence is retained and who can retrieve it. A later firmware, controller or RF change should add a new dated observation rather than overwrite the original. The resulting history supports lifecycle decisions and distinguishes a new regression from the accepted baseline. Keep the first accepted join, power, wired, radio and client test results so later software or RF changes have a baseline.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard. Handover should contain exact PID, serials, quantity evidence, compliance lookup, software role, mounting record and lifecycle owner.

Related Aironet 1832 order records

• AIR-AP1832I-D-K9C - compare software and procurement form.
• AIR-AP1832I-Z-K9C - compare regulatory-domain evidence.
• AIR-AP1832I-Z-K9 - compare regulatory-domain evidence.

Official evidence: Cisco Aironet 1830 Series data sheet; Cisco Aironet 1830 lifecycle bulletin; Cisco Aironet 1830 support page; and Cisco wireless compliance tool.