Enterprise IT Network Hardware Products - Page 54

Condition: Condition confirmed by quotation

RUCKUS ICX7650-4X10GF is a four-port 10 Gigabit SFP+ expansion module, not a complete Ethernet switch. Select it for a supported ICX chassis and port configuration.

Condition: Condition confirmed by quotation

Barco ClickShare X-Display 65 is a 65-inch LCD meeting display with 4K UHD resolution. The manufacturer identifies the ZH display article as R9861665ZH; X-Display Plus is a separately named configuration.

Condition: Condition confirmed by quotation

ClickShare X-Display 86 is an 86-inch LCD meeting display with 3840 × 2160 resolution. The existing order description mentions a CD-86M1 set with CX-M; confirm that bundle in writing rather than assuming every base display includes it.

Condition: Condition confirmed by quotation

This CX-20 listing identifies the Gen2 ZH bundle with one Button. Barco maps that configuration to R9861612ZHB1; the earlier R9861512ZH is a different generation.

Condition: Condition confirmed by quotation

ClickShare Bar Core combines wireless conferencing with a 4K camera and stereo audio for small meeting rooms and huddle spaces. Bar Core is distinct from the separately specified Bar Pro.

Condition: Condition confirmed by quotation

Barco R9861581 converts an HDMI input, with a USB connection, to a USB-C DisplayPort output. The direction matters: this ClickShare accessory is not a generic USB-C-to-HDMI display adapter.

Condition: Condition confirmed by quotation

The Barco ClickShare Tray, article R9861500T01, stores up to four ClickShare Buttons between meetings. It is a tabletop holder, not a wireless presentation base unit.

Condition: Condition confirmed by quotation

STS-K058 is a Contacta window intercom system with a bent, vandal-resistant customer microphone mounted to the screen, a staff unit and a counter hearing-loop facility.

Condition: Condition confirmed by quotation

V34a PRO is Contacta's constant-current, dual-output driver for phased-array hearing loops in large venues. It supports network-based setup and status monitoring, not general-purpose network routing.

Condition: Condition confirmed by quotation

Contacta V22 is a single-output hearing loop driver for perimeter loop systems in medium to large venues. This listing is for V22, not the separately named V22+ or dual-output V22a PRO.

Condition: Condition confirmed by quotation

AIR-ANT4941 is a Cisco indoor articulated dipole antenna for a 2.4 GHz Aironet radio connection. It uses an RP-TNC plug and an omnidirectional horizontal pattern.

Condition: Condition confirmed by quotation

Cisco AIR-ANT2465P-R is a 2.4 GHz diversity patch antenna with 6.5 dBi peak gain, vertical polarization and RP-TNC connections. It differs from the single-patch AIR-ANT2460P-R.

Condition: Condition confirmed by quotation

AIR-ANT2414S-R is a Cisco outdoor 2.4 GHz sector antenna with 90-degree azimuth coverage. Its specified 14 dBi gain includes the supplied 1.5 m cable.

Condition: Condition confirmed by quotation

Cisco AIR-ANT5195P-R is a 9.5 dBi, vertically polarized 2 × 2 patch array for 5150–5850 MHz. Its attached lead ends in an RP-TNC male connector.

Condition: Condition confirmed by quotation

AIR-ANT5114P-N is Cisco's directional 2 × 2 patch-array antenna with a female N connector. Gain is 13 dBi from 4900–5470 MHz and 14 dBi from 5470–5850 MHz.

Condition: Condition confirmed by quotation

Cisco AIR-ANT2506 is a 5.2 dBi omnidirectional mast-mount antenna for 2.4 GHz WLAN radios with an RP-TNC connection. It is suitable for indoor or outdoor installation.

Condition: Condition confirmed by quotation

AIR-ANT2460P-R is a Cisco 6 dBi single-patch antenna covering 2400–2484 MHz. It uses vertical polarization and an RP-TNC connection for compatible 2.4 GHz Aironet radios.

Condition: Condition confirmed by quotation

Cisco AIR-ANT1949 is a vertically polarized 13.5 dBi Yagi antenna for a 2.4 GHz Aironet radio installation. Its directional beam must be aligned with the intended link.

Condition: Condition confirmed by quotation

AIR-ANT5135D-R is Cisco's black 3.5 dBi articulated dipole for 5150–5850 MHz. Its horizontal radiation pattern is omnidirectional; this is not an outdoor directional panel.

Condition: Condition confirmed by quotation

Cisco AIR-ANT2524DW-RS is a white indoor dual-band antenna with self-identification circuitry, 2 dBi gain at 2.4 GHz and 4 dBi at 5 GHz. It is an antenna accessory, not an access point.