Enterprise IT Network Hardware Products - Page 53

Condition: Condition confirmed by quotation

SPA-2XOC12-POS is a Cisco two-port Packet over SONET/SDH shared port adapter. The ASR 9000 hardware guide identifies it as single-height with OC-3/STM-1 and OC-12/STM-4 operation, supported from IOS XR 4.3.0.

Condition: Condition confirmed by quotation

Cisco A9K-MPA-4X10GE is a four-port 10 Gigabit Ethernet modular port adapter. Cisco lists it for the ASR 9001 with IOS XR 4.2.1 or later; it is not a complete router.

Condition: Condition confirmed by quotation

HPE 875655-001 is a 480GB Read Intensive solid-state drive with a 6Gb/s SATA interface. The hot-plug 2.5-inch SFF assembly uses a Smart Carrier and digitally signed firmware; it is an SSD, not a rotating SAS hard disk.

Condition: Condition confirmed by quotation

HPE 743183-001 is a 4TB SAS hard drive listed for 3PAR StoreServ 7000 systems and the M6720 drive enclosure. Its specifications are 7,200 rpm, 6Gb/s SAS and 3.5-inch LFF; the documented 3PAR drive model is HMRP4000S5xnN7.2.

Condition: Condition confirmed by quotation

HPE 658102-001 is the 2TB, 7,200-rpm SATA Midline drive assembly with a 6Gb/s interface and 3.5-inch LFF form factor. It includes the SmartDrive Carrier form of hot-plug assembly and is not specified for MSA products.

Condition: Condition confirmed by quotation

HPE 657739-001 is a 1TB Midline SATA hard disk in a hot-plug 3.5-inch LFF SmartDrive Carrier assembly. The drive is rated at 7,200 rpm with a 6Gb/s SATA interface, and HPE identifies it as unsuitable for MSA products.

Condition: Condition confirmed by quotation

HPE 653957-001 is a 600GB enterprise hard drive with dual-port SAS, a 6Gb/s interface rating and a 10,000-rpm spindle. The hot-plug 2.5-inch SFF assembly uses a SmartDrive Carrier; HPE explicitly excludes use in MSA products.

Condition: Condition confirmed by quotation

HPE 693569-001 identifies a 300GB rotating hard drive with a SAS interface, 6Gb/s link rating, 10,000-rpm spindle speed and 2.5-inch form factor. HPE PartSurfer lists this exact assembly in a ProLiant ML350 Gen9 component bill of materials.

Condition: Condition confirmed by quotation

HPE P06188-001 is a 16GB registered SmartMemory module: one 16GB DIMM, dual-rank x8 organization and DDR4-2933 with CAS 21-21-21 timing. It is server memory, not a complete server.

Condition: Condition confirmed by quotation

Cisco A901-6CZ-FT-D is an ASR 901 10G aggregation router with Ethernet and TDM interfaces, DC power and USB. It belongs to ASR 901, not the ASR 9000 modular-router family.

FLSASR903-1588= is the paper-PAK ordering code for Cisco ASR 903 IEEE 1588-2008 boundary-clock/master-clock licensing. It is a software entitlement, not a timing hardware module.

Condition: Condition confirmed by quotation

Cisco A903-FAN is the modular fan tray for ASR 903 routers, separate from the power supply. Its assembly contains twelve fans, status indicators and an alarm port with four external alarm inputs.

Condition: Condition confirmed by quotation

A9K-DC-PEM-V2 is the Cisco ASR 9000 Version 2 DC power entry module, also described as the power tray. It is not the separate 2 kW DC output module installed in the power system.

Condition: Condition confirmed by quotation

ASR-9001-FAN is the Cisco ASR 9001 fan tray. It is a cooling component, distinct from the ASR-9001-FAN-V2 version used with the baffle arrangement.

Condition: Condition confirmed by quotation

XBR-R000295 is a four-post rack mounting kit for supported RUCKUS ICX switches. It is a mechanical accessory, not a server, wireless access point or complete switch.

ICX7750-L3-COE is the entitlement certificate for advanced Layer 3 functionality on RUCKUS ICX 7750. It is not a hardware module and does not include a switch or additional ports.

Condition: Condition confirmed by quotation

RPS16DC-I is a 510 W DC power-supply option for supported ICX 6610, 7450 and 7650 configurations. Its intake airflow runs back to front; it is not a wireless access point.

Condition: Condition confirmed by quotation

ICX-FAN11 is the RUCKUS ICX 7150-48ZP replacement fan tray. The manufacturer specifies a hot-swappable assembly and up to two trays per switch, applicable to the Z-Series.

Condition: Condition confirmed by quotation

RUCKUS ICX-ADP-PLT is an adapter plate used for ICX compact-switch mounting. It is distinct from the ICX-DIN-MNT rail kit and does not provide Ethernet ports.

Condition: Condition confirmed by quotation

ICX-DIN-MNT mounts a supported RUCKUS ICX compact switch on a DIN rail. It is mechanical mounting hardware, not a switching module or network device.