Enterprise IT Network Hardware Products - Page 52

Condition: Condition and offered contents confirmed by quotation

ASA5545-FPWR-K9 is the Cisco ASA 5545-X FirePOWER Services configuration with eight Gigabit Ethernet data interfaces, AC power and two SSDs. This is a legacy appliance: Cisco lists September 30, 2025 as its last support date.

Condition: Condition confirmed by quotation

Contacta STS-SJB is the 3.5 mm break-out box for a window intercom staff-side headset connection. The RJ11 version is a different product code, STS-SJB-RJ.

Condition: Installed cards, power supplies and condition confirmed by quotation

Huawei CE9860-4C-EI belongs to the CloudEngine 9800 data-center switch family, not CE8800. Huawei specifies 25.6Tbps switching capacity, a 65MB buffer and port configurations up to 128 × 100GE or 32 × 400GE.

Condition: Hardware revision, region and condition confirmed by quotation

FAP-223E-D is a Fortinet FortiAP 223E wireless access point ordering variant. The 223E uses external antennas for its 2.4GHz and 5GHz radios and a LAN/PoE connection; it is not the internal-antenna 221E model.

Condition: Condition and support availability confirmed by quotation

Huawei USG2110-F-W is a USG2110 security gateway with two Fast Ethernet WAN ports, eight Fast Ethernet switching ports and 802.11a/b/g/n Wi-Fi. These are FE interfaces, not Gigabit Ethernet ports.

Condition: Entitlement and supply eligibility require confirmation

Cisco defines ASR5K-SW-R9U-K9 as ASR 5000 System Software, Release 9 UMTS. The item is software for a legacy mobile-core platform, not a physical router or an expansion module.

Condition: Entitlement and supply eligibility require confirmation

ASR5K-SW-R8U-K9 identifies Cisco ASR 5000 system software, Release 8 UMTS. It is not ASR 9000 hardware or a router line card. Cisco lists this exact software code in its Release 8.0 end-of-life bulletin.

Condition: New Factory Sealed

ASR5K-0110G-SM-K9 is the retired Cisco ASR 5000 XGLC primary order with 1 10 Gigabit Ethernet interface for single-mode SFP+.

Condition: Condition confirmed by quotation

Dell 1W7HC is a 600GB 2.5-inch hard disk with a 15,000 RPM spindle and 12Gbps SAS interface. It is a rotating hard drive, not an SSD. Dell lists this part in the PowerVault NX3340 supported-drive matrix.

Condition: Condition confirmed by quotation

Dell 01M0D is a 1.2TB SAS hard-drive part. Dell's storage matrix maps it to Toshiba AL15SEB120NY with a 2.5-inch form factor and 10,000 RPM spindle speed.

Condition: Condition confirmed by quotation

Dell 28F3R is a 240GB SATA SSD with a 2.5-inch, 7mm drive form factor. A Dell Enterprise Support representative identifies it as a Samsung mixed-use part; it is not a 250GB 3.5-inch drive.

Condition: Condition confirmed by quotation

This 0N85XX listing is for the Dell N85XX drive identity, mapped by Dell to Toshiba/Kioxia KPM5XRUG3T84. It is a 3.84TB 2.5-inch SAS SSD; confirm the Dell label and installed firmware before use.

Condition: Condition confirmed by quotation

Dell R1ND2 is a 960GB 2.5-inch SSD identified as Samsung MZILT960HAHQ0D3 in the ME484 support matrix. Its entry is non-SED; it is not a generic promise of encrypted storage.

Condition: Condition confirmed by quotation

Dell 503M7 is identified as Toshiba PX05SVB096Y in the MD1280 support matrix. It is a 960GB 2.5-inch SSD with 512n sectors; the matrix lists it as non-SED.

Condition: Condition confirmed by quotation

Dell MWGK7 maps to Toshiba PX05SRB096Y, a 960GB 2.5-inch SSD in the PowerVault ME484 support matrix. That matrix identifies the drive as non-SED.

Condition: Condition confirmed by quotation

Dell RT8MY corresponds to drive model DL900MP0136: a 900GB, 15,000 RPM, 2.5-inch SAS hard drive with a 12Gbps interface and 512e sectors. Dell includes it in its discontinued 15K SAS drive list.

Condition: Condition confirmed by quotation

This listing describes ASR-9010-DC-V2, the Cisco ASR 9010 DC chassis configuration with Version 2 power entry modules. ASR 9010 is part of ASR 9000, not the smaller ASR 900 family, and uses a 21 RU chassis.

Condition: Condition confirmed by quotation

ASR-9006-AC identifies a Cisco ASR 9006 AC chassis ordering configuration associated with the Version 1 power bundle. The chassis is 10 RU with four line-card positions and two RSP positions; the installed power generation must be verified.

Condition: Condition confirmed by quotation

Cisco SPA-8XT3/E3 is an eight-port clear-channel T3/E3 shared port adapter for documented ASR 1000 configurations. Ports can be set to T3 or E3. It must not be described as a channelized T1/E1 breakout adapter.

Condition: Condition confirmed by quotation

Cisco SPA-10X1GE-V2 provides ten Gigabit Ethernet interfaces through pluggable SFPs. This Version 2 shared port adapter is double-height; ten 1 GE ports must not be confused with a 10 GE interface.