Enterprise IT Network Hardware Products - Page 2

Condition: New Factory Sealed

Huawei AP4051DN is an indoor 802.11ac Wave 2 access point with 2×2 MIMO, two spatial streams and simultaneous 2.4 GHz/5 GHz service. Both GE0/PoE_IN and GE1/PoE_IN are Gigabit Ethernet inputs supporting PoE; Huawei describes dual-port power backup. Its USB2.0 interface supports storage expansion. The exact hardware table lists 12 V DC or IEEE 802.3af/at input and a 12.3 W consumption reference excluding USB output, with actual maximum subject to regional rules.

Condition: New Factory Sealed

Huawei AP4130DN is an indoor IEEE 802.11ac access point with simultaneous 2.4 GHz and 5 GHz service, 2×2 MIMO and external dual-band antennas. Its 2.4G/5G antenna connection is RP-SMA-K and carries both bands. The single GE/PoE Ethernet port accepts PoE input; 12 V DC is the alternative input. Huawei lists a 10.2 W maximum consumption reference and different user references for Fit and Fat modes: 256 and 64. A Fit AP plus bridge hybrid mode is described in the exact characteristics.

Condition: New Factory Sealed

Huawei AP4050DE-M is an indoor 802.11ac Wave 2 access point with 2×2 MIMO, two spatial streams and simultaneous 2.4 GHz/5 GHz service. Its built-in smart antenna array targets signal coverage as terminals move; built-in Bluetooth supports positioning with eSight. The AP supports Fat, Fit and cloud management modes. Its hardware reference is 47 × 200 × 200 mm, 0.7 kg and IP41, with 12 V DC or IEEE 802.3at/af power input and a region-qualified maximum consumption of 16.40 W.

Condition: New Factory Sealed

Huawei AP4030DN is an indoor dual-band IEEE 802.11ac access point with 2×2 MIMO. It serves 2.4 GHz and 5 GHz clients simultaneously and supports a Fit AP plus bridge hybrid arrangement. A single GE/PoE port connects the wired Ethernet and accepts PoE input; a separate console supports maintenance. The exact hardware chapter lists 12 V DC or IEEE 802.3af/at PoE and a region-qualified maximum power reference of 10.2 W. Fit and Fat user references differ: up to 256 and 64 respectively.

Condition: New Factory Sealed

Huawei AP4030TN is an indoor IEEE 802.11ac access point with 2×2 MIMO and three flexible radios. One radio is 5 GHz-only; the other two support 2.4 GHz and 5 GHz. Huawei describes 2.4G plus dual-5G access and a Fit AP plus bridge hybrid mode. GE0/PoE and GE1 provide Gigabit Ethernet connections, and USB can extend storage while supplying up to 2.5 W. Power input is 12 V DC or IEEE 802.3at PoE; the 21.5 W hardware consumption reference excludes USB output.

Condition: New Factory Sealed

Huawei AP4050DN-S is an indoor dual-band 802.11ac Wave 2 access point with 2×2 MIMO, two spatial streams and MU-MIMO. Its built-in omnidirectional dual-band antenna serves 2.4 GHz and 5 GHz simultaneously. One Gigabit GE/PoE_IN connection handles the wired uplink and PoE input; a separate console port supports maintenance. The hardware supports 12 V DC or IEEE 802.3af/at PoE, with 12.1 W region-qualified maximum consumption. Confirm the power source, management mode and supplied accessories in the quote.

Condition: New Factory Sealed

Huawei AP9132DN is a railway access point with simultaneous 2.4 GHz and 5 GHz service, IEEE 802.11ac and 3×3 MIMO. Its wired connections include a Gigabit M12 electrical interface and a separate optical interface, with external QMA antenna connections. Huawei documents distinct trackside backhaul, vehicle-mounted backhaul and compartment coverage roles. Power comes from 48 V DC within a 33.6–60 V range or IEEE 802.3at PoE; specify the role, antenna arrangement and management mode in the quotation.

Condition: New Factory Sealed

Huawei AP8050TN-HD is an outdoor 802.11ac Wave 2 access point designed for high-density sites such as stadiums and outdoor courts. It has three radios: one at 2.4 GHz and two at 5 GHz, each using 2×2 MIMO with two spatial streams. Built-in directional antennas provide 40° horizontal/vertical beamwidth at 2.4 GHz and 27° at 5 GHz. Two Gigabit Ethernet connections and an optical SFP port support wired integration; specify the PoE mode, country version and mounting scope in the quotation.

Condition: New Factory Sealed

Huawei AP8150DN is an outdoor 802.11ac Wave 2 access point with external antenna connections and 2×2 MU-MIMO using two spatial streams. Its N-type female 2.4G/5G interface supports switching the 2.4 GHz radio to 5 GHz, alongside the dedicated 5G antenna interface. GE0/PoE, GE1 and a 100M/1000M SFP port provide wired connectivity, with IEEE 802.3at power input. Specify the antennas, grounding, radio plan and optics separately when requesting a quote.

Condition: New Factory Sealed

Huawei AP8050DN is an outdoor dual-band 802.11ac Wave 2 access point with 2×2 MU-MIMO and two spatial streams. Its built-in directional antenna has 60° horizontal and 30° vertical beamwidths, with 10 dBi reference gain on both bands. Two Gigabit Ethernet connections and a 100M/1000M SFP optical port support wired integration. IEEE 802.3at PoE powers the AP, whose enclosure is rated IP68; confirm the destination version, optical module and mounting kit with the quotation.

Condition: New Factory Sealed

Huawei AP5030DN-S is an indoor dual-band IEEE 802.11ac access point with 3×3 MIMO. It serves 2.4 GHz and 5 GHz simultaneously through built-in omnidirectional antennas and uses one Gigabit GE0/PoE wired connection. Huawei lists up to 256 users in Fit mode and 64 in Fat mode, so the management choice changes the reference client limit. Power is supplied through IEEE 802.3af/at PoE or 12 V DC; confirm software, country configuration and accessories with the quote.

Condition: New Factory Sealed

Huawei AP4050DN-HD is an indoor 802.11ac Wave 2 access point with 2 × 2 MIMO and two spatial streams. Its built-in dual-band directional antenna has a 30-degree beamwidth, with reference gains of 13 dBi at 2.4 GHz and 10 dBi at 5 GHz. Two Gigabit Ethernet ports have distinct roles: GE0 accepts PoE input and GE1 provides PoE output to downstream devices. Check the powering mode, antenna orientation and intended high-density coverage area in the design.

Condition: New Factory Sealed

Huawei AP1050DN-S is an indoor 802.11ac Wave 2 access point with 1 × 1 MU-MIMO and simultaneous 2.4 GHz and 5 GHz service. One Gigabit Ethernet uplink also accepts PoE input; the hardware supports IEEE 802.3af/at PoE or 12 V DC. Its official reference dimensions are 35 × 170 × 170 mm and weight is 0.41 kg. Select Fat, Fit or cloud mode and confirm the power source and regional radio settings for the intended installation.

Condition: New Factory Sealed

Huawei S2730S-S16FT4S-A is ordering part 98011315, with eight 10/100BASE-TX copper ports, eight 10/100/1000BASE-T copper ports and four GE SFP positions. It is a non-PoE switch using built-in AC power and a fan. Huawei specifies 22.7 W typical and 28.1 W maximum consumption, and supports optical modules with a transmission distance of 10 km or less. The mixed copper rates and optic-distance limit matter when selecting this chassis.

Condition: New Factory Sealed

Huawei S2730S-S24FT4S-A, part 98011309, combines twelve 10/100BASE-TX ports, twelve 10/100/1000BASE-T ports and four GE SFP ports. This is a non-PoE 1U switch with built-in AC power and one built-in fan. The official hardware table lists 32.7 W typical and 47.6 W maximum consumption. Check endpoint speed allocation and the optical-module temperature conditions before specifying this mixed-speed chassis.

Condition: New Factory Sealed

Huawei S2710-52P-PWR-SI is the BOM 02354130 bundle: 48 Ethernet 10/100 PoE+ ports, four Gigabit SFP interfaces and a 500W AC power supply in the manufacturer order description. V100R006C03 is its first supported version. Plan the powered-endpoint load separately from the AC supply rating and request the actual module configuration with the quotation.

Condition: New Factory Sealed

Huawei S2710-52P-SI-AC is the BOM 02354128 Ethernet access switch with 48 Ethernet 10/100 ports and four Gigabit SFP interfaces. The official order description identifies AC 110/220 V power. Its manufacturer mapping starts at V100R006C03. Specify the optical line rate, fibre type and actual installed software separately when requesting this 48-port Fast Ethernet chassis.

Condition: New Factory Sealed

Huawei S2720-52TP-EI is the BOM 98010673 mixed-speed access switch with 32 Ethernet 10/100 ports, 16 Ethernet 10/100/1000 ports and four Gigabit SFP interfaces. It is a non-PoE 1U chassis with a built-in AC supply and one built-in fan. The manufacturer lists 30.3 W typical and 40.3 W maximum consumption. Match endpoint speeds, side-to-side airflow and the required software release when requesting a quote.

Condition: New Factory Sealed

Huawei S2720-28TP-PWR-EI-L maps to BOM 98010677 and combines 16 Ethernet 10/100 connections with eight Ethernet 10/100/1000 connections. Its exact order description specifies eight PoE+ ports and 124 W PoE AC. The hardware uses a built-in AC supply and natural cooling without fans. Confirm the intended powered-device load and operating temperature before selecting this mixed-speed access switch.

Condition: New Factory Sealed

Huawei S2720-28TP-EI-AC is mapped to chassis BOM 02359395. The order combines 24 Ethernet 10/100 access ports, two Gigabit SFP interfaces and two dual-purpose 10/100/1000-or-SFP positions, with AC 110/220 V input. V200R006C10 is the first supported version shown in the official matched-parts table. Copper access speed, uplink media and the actual installed release must be checked separately.