AIR-AP1815I-T-K9C Cisco 1815I Controller-based Mobility Express AP

AIR-AP1815I-T-K9C exact order identity

AIR-AP1815I-T-K9C is an indoor Cisco Aironet 1815i 802.11ac Wave 2 access point. It uses internal antennas only, supports concurrent 2.4-GHz and 5-GHz radios with 2x2 MIMO and two spatial streams, and provides one 10/100/1000 Ethernet uplink with 802.3af/at PoE.

Software order boundary

Cisco identifies K9C as the configurable order whose default software option is Mobility Express. Used stock may have been converted or reimaged, so retain the running image, current role, configured country, management backup and recovery result.

T regulatory-domain evidence

The domain letter is an ordering identifier, not a country name. Document the T-domain destination and controller country setting before installation, then keep the evidence through software upgrades.

Use software-upgrade governance for the T-domain record. Before an upgrade, preserve the controller country, enabled channels, AP serial and dated compliance lookup; after the change, capture the same fields for comparison. Investigate a changed radio state before production acceptance. This ties the domain decision to an observable configuration history instead of a one-time purchasing note.

Integrated antenna and installation boundary

Cisco documents two integrated 2.4-GHz antennas and two integrated 5-GHz antennas. There is no external-antenna conversion in this PID. Reconcile AIR-AP-BRACKET-8 or other selected mounting hardware and verify the final wall or ceiling placement against the RF survey.

Lifecycle decision

Cisco lists this product family as end of sale, identifies Catalyst 9105AX as the migration direction and publishes 30 April 2027 as the last support date. Available inventory does not extend that date.

Deployment evidence worksheet

Authentication path test

Commission representative clients through association, authentication, address assignment, DNS and application reachability. Preserve the identity policy used, test client type, result and relevant controller logs. An access point that joins its controller has not yet demonstrated the user path. Repeat the test after any controller, certificate or authentication-service change and retain failures separately from RF or switch-port evidence. Test association, authentication, address assignment, DNS and application reachability after the AP is operational.

Roaming acceptance

Define the neighboring access points and client types used for roaming validation. Record handoff behavior, interruption observed, authentication result and controller events along the intended movement path. Compare the outcome with the site's design target rather than declaring success from static association. Where this unit replaces an older AP, test both entry and exit from its cell so a local improvement does not hide a boundary problem. Roaming acceptance must identify neighboring cells, client type and controller events along the movement path.

Monitoring handover

Assign owners for AP reachability, controller join failures, radio utilization, client health and switch-port errors. Confirm that the exact serial appears in inventory and monitoring, then test the alert path. Record dashboard object, notification route and escalation owner. Telemetry that is not tied to an owned asset does not provide a reliable service baseline and will not support later comparison after channel or software changes. Monitoring should join AP serial, controller state, radio health, Ethernet errors and client experience.

Change-window controls

Document staging evidence, production window, installer, rollback owner and measurable success criteria. Preserve the prior controller or AP state needed for recovery. After the change, close temporary credentials, compare authentication, monitoring and RF results with the approved baseline, and record the final decision. The work is not complete merely because the unit powers on or appears in a controller list. Rollback must restore controller assignment, country state, switch port and the previously accepted RF service.

Security baseline

Retain the approved controller policy, management authorization, certificate or trust workflow, client authentication test and logging destination. Confirm behavior on the deployed controller software instead of promising a protocol from the hardware family name. Remove temporary onboarding access and verify administrative reachability after handover. This keeps product identity separate from software-dependent security claims. Record only security settings demonstrated on the deployed controller or Mobility Express release.

Capacity observation

Define the expected concurrent clients, application mix, airtime utilization and channel-width assumptions for this location. After commissioning, capture radio utilization, retry behavior and representative throughput during a meaningful load period. Compare the observation with the survey design and state any shortfall. A peak link rate from a data sheet is not a site capacity result and should not replace measured operating evidence. Use measured airtime, retries and client behavior rather than a published PHY rate as site-capacity evidence.

Interference baseline

Preserve the pre-install and post-install noise, neighboring-radio and channel-occupancy observations for the selected location. Record any controller-driven channel change during acceptance. If the regulatory profile limits the channel choices, state how that constraint affected reuse and mitigation. This baseline gives future troubleshooting a reference point and prevents an unrelated interference change from being attributed to the hardware order. Preserve active country and legal channel state after controller changes or a Mobility Express conversion.

Replacement dependency map

Map this unit to controller, licenses, authentication services, switch power, cable, bracket, antenna design and monitoring objects. For an end-of-sale platform, state which dependencies can be reused by the planned Catalyst migration and which require change. A nominal access-point replacement can fail when the surrounding platform was never inventoried. Keep the map with the asset rather than only in a one-time project file. Cisco names Catalyst 9105AX as the migration family; validate controller, power, mounting and coverage changes.

Related Aironet 1815i order records

• AIR-AP1815I-T-K9 - compare software order and regulatory-domain evidence.
• AIR-AP1815I-Q-K9 - compare software order and regulatory-domain evidence.
• AIR-AP1815I-K-K9 - compare software order and regulatory-domain evidence.

Official evidence: Cisco 1815i data sheet; Cisco 1815i getting started guide; Cisco Aironet 1815 lifecycle bulletin; Cisco support page; and Cisco compliance lookup.