AIR-AP1815I-E-K9C Cisco Aironet 1815I Dual-band Mobility Express AP

AIR-AP1815I-E-K9C exact order identity

AIR-AP1815I-E-K9C is an indoor Cisco Aironet 1815i 802.11ac Wave 2 access point. It uses internal antennas only, supports concurrent 2.4-GHz and 5-GHz radios with 2x2 MIMO and two spatial streams, and provides one 10/100/1000 Ethernet uplink with 802.3af/at PoE.

Software order boundary

Cisco identifies K9C as the configurable order whose default software option is Mobility Express. Used stock may have been converted or reimaged, so retain the running image, current role, configured country, management backup and recovery result.

E regulatory-domain evidence

The domain letter is an ordering identifier, not a country name. Associate the E-domain compliance result with the installed controller object and repeat the check after any country-setting migration.

Use controller migration as the E-domain evidence scenario. Export the existing country and radio configuration before the move, then compare the post-migration state with the dated Cisco compliance result. Keep both observations beside the exact PID and serial. Unchanged client connectivity is not enough because it does not show that the intended regulatory configuration survived.

Integrated antenna and installation boundary

Cisco documents two integrated 2.4-GHz antennas and two integrated 5-GHz antennas. There is no external-antenna conversion in this PID. Reconcile AIR-AP-BRACKET-8 or other selected mounting hardware and verify the final wall or ceiling placement against the RF survey.

Lifecycle decision

Cisco lists this product family as end of sale, identifies Catalyst 9105AX as the migration direction and publishes 30 April 2027 as the last support date. Available inventory does not extend that date.

Deployment evidence worksheet

Controller join evidence

Stage the access point on the controller release intended for production. Retain the controller model, software version, discovery path, authorization method and first successful CAPWAP join. Confirm that configuration download completes and that both radios reach an expected operational state. Remove any temporary staging authorization before handover. This evidence separates an orderable access point from a unit that has actually been proven compatible with the planned controller environment. For the 1815i, retain controller discovery, software download and final join evidence beside the exact serial.

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. Cisco documents 802.3af/at PoE on the single Ethernet uplink; record the negotiated power source and boot state.

Ethernet and cabling proof

Preserve the permanent-link test, patch-lead identities, switch port, negotiated Ethernet rate and error counters. Investigate pair faults, excessive length or rate fallback before wireless acceptance begins. A link light only proves connectivity at some rate; it does not demonstrate the intended uplink performance. Tie the cable result to the AP serial so a later throughput problem can be separated from radio, controller and wired-path causes. The 1815i requires a Gigabit Ethernet link to avoid a wired bottleneck; retain negotiated rate and cable counters.

Survey-to-install reconciliation

Attach the approved RF survey location, mounting height, orientation, expected client density, channel width and neighboring-radio assumptions to the order. After installation, compare measured coverage and interference with that design. If ceiling construction, antenna placement or obstructions changed, document the deviation and repeat the affected measurements. This provides a site-specific acceptance reason for the exact unit instead of relying on a family data sheet alone. The integrated-antenna result depends on wall or ceiling position, orientation and the accepted RF survey.

Mechanical installation record

List the bracket, ceiling or wall interface, enclosure requirement, safety restraint, service clearance and cable-entry plan before scheduling installation. Receiving should identify missing mechanical items before the access point reaches site. Photograph the mounted label and final cable entry, then record how the unit can be reached for replacement. A complete electronic order can still be an unusable deployment kit when mechanical dependencies are omitted. AIR-AP-BRACKET-8 is included only when selected with the order and can be ordered separately; reconcile mounting parts.

Serial-level asset control

Capture chassis serial, base MAC address, carton reference, deployment site, controller assignment and asset owner. Reconcile the identifiers against the purchase line before activation. Multi-unit cartons require an entry for every physical access point; a carton SKU alone cannot show which unit was installed, held as a spare or returned. This record is also needed to trace support entitlement, replacement history and monitoring ownership. Link serial, base MAC, installed location and controller or Mobility Express ownership before activation.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Cisco makes the customer responsible for country approval; save the compliance lookup and controller country.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a different access-point order merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here. A changed regulatory token or K9/K9C suffix is a different procurement identity requiring a fresh review.

Related Aironet 1815i order records

• AIR-AP1815I-E-K9 - compare software order and regulatory-domain evidence.
• AIR-AP1815I-F-K9 - compare software order and regulatory-domain evidence.
• AIR-AP1815I-R-K9C - compare software order and regulatory-domain evidence.

Official evidence: Cisco 1815i data sheet; Cisco 1815i getting started guide; Cisco Aironet 1815 lifecycle bulletin; Cisco support page; and Cisco compliance lookup.