AIR-AP1815T-A-K9 Cisco Aironet 1815t Teleworker Access Point

AIR-AP1815T-A-K9 Exact Teleworker Order

AIR-AP1815T-A-K9 is Cisco's A-domain Aironet 1815t controller-based 802.11ac Wave 2 order. The 1815t is designed for teleworker and micro-branch OfficeExtend use; it is not the wall-plate 1815w or the general indoor 1815i.

Remote-office network boundary

The AP supplies one Gigabit WAN/uplink interface and three local Gigabit Ethernet ports while its simultaneous dual-band 2x2 radios provide two spatial streams. Record the ISP handoff, addressing, tunnel/controller reachability and VLAN or policy assignment for each occupied local port.

A-domain compliance evidence

The domain letter is an order-control token rather than a country name. Retain the destination-country result, the exact A-domain PID and the controller country setting in one approval record.

Use receiving as the A-domain control point: photograph the carton PID, reconcile it with the purchase order and attach the Cisco lookup before the serial is released. At commissioning, compare the controller country setting with that same record. A return replacement must repeat both checks because matching enclosure and antenna form do not establish matching regulatory identity.

A-domain field acceptance

For the A-domain AP, keep exact PID, destination-country approval and controller country in one record. Validate split-tunnel or centrally switched policy, guest isolation, local-port access and emergency remote recovery with the approved production image.

Power and staging plan

The desktop-oriented unit can use its documented power path and integrated antennas. Stage controller reachability, software, regulatory country, WAN behavior and local ports at the corporate site before shipment, but repeat the WAN and compliance checks at the final destination.

Teleworker operations worksheet

Controller join evidence

Stage the access point on the controller release intended for production. Retain the controller model, software version, discovery path, authorization method and first successful CAPWAP join. Confirm that configuration download completes and that both radios reach an expected operational state. Remove any temporary staging authorization before handover. This evidence separates an orderable access point from a unit that has actually been proven compatible with the planned controller environment. For this A-domain teleworker order, tie the result to the remote-user circuit, controller object and exact AP serial.

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. For this A-domain teleworker order, tie the result to the remote-user circuit, controller object and exact AP serial.

Mechanical installation record

List the bracket, ceiling or wall interface, enclosure requirement, safety restraint, service clearance and cable-entry plan before scheduling installation. Receiving should identify missing mechanical items before the access point reaches site. Photograph the mounted label and final cable entry, then record how the unit can be reached for replacement. A complete electronic order can still be an unusable deployment kit when mechanical dependencies are omitted. For this A-domain teleworker order, tie the result to the remote-user circuit, controller object and exact AP serial.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. For this A-domain teleworker order, tie the result to the remote-user circuit, controller object and exact AP serial.

Lifecycle decision

Cisco lists the Aironet 1815 family as end of sale, gives 30 April 2027 as the last support date and identifies Catalyst 9105AX as the migration family. Compare remote-site WAN behavior, controller architecture, wired-port needs, power and desk placement before choosing a replacement.

Official sources: Cisco Aironet 1815t data sheet, Cisco 1815t getting-started guide, Cisco 1815t teleworker deployment guide, Cisco 1815 lifecycle notice and Cisco compliance lookup.