Brand procurement
CISCO Products and Procurement - Page 75
Browse CISCO products for Catalyst and Nexus switching, ISR and Catalyst routing, Secure Firewall, enterprise wireless, optics, modules and software subscriptions. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.
Recently updated
Recently Updated CISCO Products
WS-C4503-E-S2+48 Cisco 4500 Switch
WS-C4503-E-S2+48 is the Cisco Catalyst 4503-E data bundle with one 1000AC supply, one Supervisor II-Plus and one WS-X4148-RJ module. The E chassis suffix distinguishes it from WS-C4503-S2+48.
WS-C4503-E-S2+48V Cisco 4500 Switch
WS-C4503-E-S2+48V is the Cisco Catalyst 4503-E PoE bundle recorded with one 1300AC supply, one Supervisor II-Plus and one WS-X4248-RJ45V module. It is not the S2+48 data bundle.
Cisco 4500 Switch WS-C4503E-S6L-1300
WS-C4503E-S6L-1300 is a Cisco Catalyst 4503-E bundle with a Supervisor 6L-E, one WS-X4648-RJ45V+E line card and a 1300W power supply. Confirm the fitted parts against the quotation.
WS-C4507R-E Cisco 4500 Switch
WS-C4507R-E is a seven-slot Cisco Catalyst E-Series chassis with supervisor positions 3 and 4 and five switching-module positions. Supervisor 8-E/8L-E requires chassis hardware revision 2.0 or higher.
WS-C4503-E Cisco 4500 Switch
WS-C4503-E is a Cisco Catalyst 4500 E-Series three-slot chassis. Slot 1 is for one supervisor; slots 2 and 3 accept switching modules. It does not support a redundant supervisor pair.
WS-C4503-S2+48 Cisco 4500 Switch
WS-C4503-S2+48 is a legacy Cisco Catalyst 4503 bundle: one 1000AC supply, one Supervisor II-Plus and one WS-X4148-RJ 48-port 10/100 module. The access module is not a 48-port Gigabit card.
Cisco C9400-S-BLANK= Catalyst 9400 Series Slot Blank Cover
C9400-S-BLANK= is Cisco’s slot blank cover for the Catalyst 9400 Series. Cisco lists C9400-PWR-BLANK= separately as the power-supply blank cover, so the two blanking components are not interchangeable order identities.
IE-4000-8T4G-E - Cisco Industrial Ethernet 4000 Series Platform
Cisco IE-4000-8T4G-E is an industrial Ethernet switch with eight Fast Ethernet copper downlinks and four Gigabit combo uplinks. It is not the 8GT Gigabit-downlink variant.
CISCO Procurement Guide
CISCO buyers should validate software and license tier, PoE budget and uplink module, airflow, power supply and stacking compatibility. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
- Confirm software and license tier before ordering.
- Confirm PoE budget and uplink module before ordering.
- Confirm airflow, power supply and stacking compatibility before ordering.
How to compare CISCO models
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: New Factory Sealed
<p><strong>C9K-PWR-1600WAC-R</strong> is Cisco's single 1600W AC hot-swappable power-supply module for the Catalyst 9500 Series High Performance <strong>C9500-32C</strong> switch. Cisco lists the separate <strong>C9K-PWR-1600WACR/2</strong> SKU when a redundant AC ordering option is required.</p>US$ 1,430.00
Condition: New Factory Sealed
<p><strong>C9K-PWR-930WDC-R/2</strong> is Cisco's redundant 930W DC power-supply ordering option for supported Catalyst 9500 Series High Performance switches. It is a distinct orderable SKU from the single-module <strong>C9K-PWR-930WDC-R</strong> entry and should be quoted against the exact chassis configuration.</p>US$ 640.00
Condition: New Factory Sealed
<p><strong>C9K-PWR-930WDC-R</strong> is a Cisco 930W DC hot-swappable power-supply module for supported Catalyst 9500 Series High Performance switches. This SKU identifies one power-supply module; Cisco lists <strong>C9K-PWR-930WDC-R/2</strong> separately as the redundant ordering option.</p>US$ 640.00
Condition: New Factory Sealed
<p><strong>ASR-9001</strong> is a 2RU Cisco ASR 9000 Series provider-edge router with 120 Gbps full-duplex fabric capacity, four integrated 10GE SFP+ ports, an integrated route switch processor and two modular adapter bays.</p>US$ 8,630.00
Condition: New Factory Sealed
<p><strong>ASR1002-10G-VPN/K9</strong> is the Cisco ASR 1002 10G VPN bundle with an ESP-10G, AESK9 license and 4 GB DRAM. Cisco identifies ASR1002X-10G-VPNK9 as its migration replacement.</p>US$ 9,800.00
Condition: New Factory Sealed
C9300L-24P-4G-E CISCO Cisco Catalyst 9300 Series Switches - The Cisco C9300L-24P-4G-E is a next-generation enterprise-class switch, expertly engineered....US$ 2,258.50
Condition: New Factory Sealed
<p><strong>C1-C4500X-F-32SFP+</strong> is the Cisco ONE Catalyst 4500-X 32-port 10G IP Base switch with back-to-front airflow. Cisco ended support for this platform on October 31, 2025.</p>US$ 4,630.00
Condition: New Factory Sealed
<p><strong>AIR-AP1832I-B-K9</strong> is the B regulatory-domain, controller-based Cisco Aironet 1832i indoor access point. Cisco describes this exact PID as an 802.11ac Wave 2, 3x3:2 spatial-stream model with internal antennas and identifies B as the US regulatory domain in its lifecycle notice.</p>US$ 200.00
Condition: New Factory Sealed
<p><strong>N9K-C93180LC-EX</strong> is the 1RU Cisco Nexus 93180LC-EX data-center switch with flexible templates supporting up to 32 x 40/50G QSFP+ ports or up to 18 x 100G QSFP28 ports. Cisco ended hardware support on August 31, 2025.</p>US$ 15,385.00
Condition: New Factory Sealed
<p><strong>AIR-AP1832I-E-K9C</strong> is the E regulatory-domain Cisco Aironet 1832i configurable PID shipped with a Mobility Express software image by default. It uses internal antennas and dual-band 3x3 MIMO with two spatial streams; country approval and the desired controller role must be checked before purchase.</p>US$ 200.00
Condition: New Factory Sealed
<p><strong>AIR-AP1832I-D-K9</strong> is the D regulatory-domain, controller-based Cisco Aironet 1832i indoor access point. Cisco's published D-domain table lists eleven 2.4 GHz channels and two separate 5 GHz ranges; country approval and controller compatibility must be confirmed before deployment.</p>US$ 200.00
Condition: New Factory Sealed
<p><strong>AIR-AP1832I-C-K9</strong> is a controller-based Cisco Aironet 1832i indoor access point with internal antennas, 802.11ac Wave 2 operation, 3x3 MIMO and two spatial streams. The <strong>C</strong> identifies its regulatory domain; this K9 PID is not the K9C Mobility Express default-software model.</p>US$ 200.00
Condition: New Factory Sealed
<p><strong>AIR-AP1832I-K-K9</strong> is the K regulatory-domain Cisco Aironet 1832i controller-based indoor AP. Cisco documents thirteen 2.4 GHz channels and three distinct 5 GHz channel groups for K-domain hardware; deployment approval and the exact controller release must be verified.</p>US$ 200.00
Condition: New Factory Sealed
<p><strong>AIR-AP1832I-S-K9</strong> is the S regulatory-domain, controller-based Cisco Aironet 1832i indoor access point. Cisco documents 13 channels at 2.4 GHz and three 5 GHz channel groups for S-domain hardware; country approval and controller software must be verified.</p>US$ 200.00
Condition: New Factory Sealed
<p><strong>AIR-AP1832I-R-K9</strong> is the R regulatory-domain Cisco Aironet 1832i controller-based indoor access point. It has internal antennas, dual-band 3x3 MIMO with two spatial streams and 802.11ac Wave 2 operation; country approval and controller compatibility must be verified before deployment.</p>US$ 200.00
Condition: New Factory Sealed
<p><strong>AIR-AP1832I-Q-K9</strong> is the Q regulatory-domain, controller-based Cisco Aironet 1832i indoor access point. It uses internal antennas and dual-band 3x3 MIMO with two spatial streams; the Q-domain channel plan and country approval must be verified before deployment.</p>US$ 200.00
Condition: New Factory Sealed
<p><strong>N9K-C9504</strong> is the 7RU Cisco Nexus 9504 modular chassis with four line-card slots and capacity for redundant supervisors, system controllers, fabric modules, fan trays and power supplies selected separately.</p>US$ 8,513.00
Condition: New Factory Sealed
<p><strong>AIR-AP1832I-E-K9</strong> is the E regulatory-domain, controller-based Cisco Aironet 1832i indoor access point with internal antennas, 802.11ac Wave 2 and 3x3 MIMO with two spatial streams.</p>US$ 835.00
Condition: New Factory Sealed
<p><strong>N5K-C5672UP-16G</strong> is the Cisco Nexus 5672UP-16G 1RU switch with 48 fixed SFP+ ports, including 24 unified ports that support 2/4/8/16-Gbps Fibre Channel, plus six 40GbE QSFP+ ports. Cisco lists its hardware support end date as May 31, 2026.</p>US$ 16,276.00
Condition: New Factory Sealed
<p><strong>N9K-C93180YC-FX</strong> is a 1RU Cisco Nexus 9300-FX switch with 48 x 1/10/25G SFP28 downlinks, six 40/100G QSFP28 uplinks, unified-port Fibre Channel capability and MACsec support.</p>US$ 13,606.00
- 1
- 73
- 74
- 75
- 76
- 77
- 97