Brand procurement
CISCO Products and Procurement - Page 17
Browse CISCO products for Catalyst and Nexus switching, ISR and Catalyst routing, Secure Firewall, enterprise wireless, optics, modules and software subscriptions. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.
Recently updated
Recently Updated CISCO Products
N9K-C9504-B3-S Cisco Nexus 9504 Chassis Bundle
N9K-C9504-B3-S is a Nexus 9504 chassis bundle with 1 supervisor, 3 power supplies, 2 controllers, 4 FM-S modules and 3 fans. Confirm line cards and optics; request a quote.
CAB-7513ACI Cisco Italy 16A 250VAC Power Cord Accessory
CAB-7513ACI is a Cisco Italy AC power cord, 14 ft (4.27 m), rated 16A at 250VAC. Match the documented plug and equipment connector; request a quote.
Cisco C1-N5K-C5596UP-FA Nexus 5596UP Cisco ONE Switch
C1-N5K-C5596UP-FA is Cisco’s Cisco ONE Nexus 5596UP switch order: a 2RU chassis described with two power supplies, four fans and 48 fixed 10GE ports. It is a complete switch ordering identity, not a separate fan accessory. Confirm the actual supplied system and software entitlement. The official Series photo shows three optional expansion modules; it is not a photograph or packing list for the offered C1 unit.
Cisco ASR5K-ACCY-LUG= ASR 5000 Chassis Lug Accessory Kit
ASR5K-ACCY-LUG= is Cisco’s chassis lug accessory kit for the ASR 5000 platform, not a standalone network switch. Cisco identifies this exact order in amended EOL10509: manufacturer sales ended in January 2016 and hardware support ended in January 2021. Confirm the supplied kit contents and installed chassis before ordering. The official image is a Series chassis grounding reference, not a photograph or bill of materials for the offered kit.
Cisco N3K-C3048-FAN Nexus 3048 Port-Side Exhaust Fan Module
N3K-C3048-FAN is the Cisco Nexus 3048 fan module for forward airflow, meaning port-side exhaust. This replacement cooling component is not a standalone network switch. The FAN-B intake variant has the opposite airflow and must not be substituted without checking the installed fan and power-supply arrangement. The image is an official host assembly reference, not a supplied fan-unit photograph.
Cisco N3K-C3048-FAN-B Nexus 3048 Port-Side Intake Fan Module
N3K-C3048-FAN-B is Cisco’s Nexus 3048 fan module with reversed airflow, also described as port-side intake. It is a cooling component, not a standalone network switch. Match its airflow to the installed cooling and power-supply arrangement. Cisco lists this exact PID in EOL14841. The official image is a host assembly reference, not a supplied fan-unit photograph.
Cisco ASR-9001-TRAY Cable Management Tray
ASR-9001-TRAY is Cisco’s cable-management tray for the ASR 9001 router, not a network switch or a chassis rack-mount kit. The installation guide places the tray at the front-bottom of the chassis to organize interface cables. Cisco names this exact ordering row in EOL14473. The official drawing shows an assembly installation reference, not the supplied unit.
Cisco A99-32X100GE-CM 32-Port 100GE Consumption Model Line Card
A99-32X100GE-CM is a fourth-generation Cisco ASR 9900 chassis line card with thirty-two 100GE QSFP28 interfaces. It is a hardware component, not a complete router, a pure software license or the A99-32HG-FC replacement. Cisco lists the CM part in EOL15321; manufacturer end of sale was 15 June 2024, with support subject to contract eligibility. The image is Cisco’s TR-family illustration, not a CM supplied-unit photograph.
CISCO Procurement Guide
CISCO buyers should validate software and license tier, PoE budget and uplink module, airflow, power supply and stacking compatibility. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
- Confirm software and license tier before ordering.
- Confirm PoE budget and uplink module before ordering.
- Confirm airflow, power supply and stacking compatibility before ordering.
How to compare CISCO models
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: Condition confirmed by quotation
AIR-AP2802I-H-K9 is a Cisco Aironet 2802i controller-based indoor access point for the H regulatory domain. It uses internal antennas, supports 802.11ac Wave 2 with 4x4 MU-MIMO and three spatial streams, and provides two Gigabit Ethernet interfaces.Request current pricing
Condition: New Factory Sealed
AIR-AP1832I-T-K9 is a Cisco Aironet 1832i integrated-antenna 802.11ac Wave 2 access point supplied as a single controller-based K9 order for regulatory-domain token T. Verify country approval, software role, power source, controller compatibility and the 30 April 2027 support cutoff before purchase.Request current pricing
Condition: New Factory Sealed
AIR-AP1832I-F-K9 is a Cisco Aironet 1832i integrated-antenna 802.11ac Wave 2 access point supplied as a single controller-based K9 order for regulatory-domain token F. Verify country approval, software role, power source, controller compatibility and the 30 April 2027 support cutoff before purchase.Request current pricing
Condition: New Factory Sealed
AIR-AP1852I-E-K9C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit configurable K9C order for regulatory-domain token E. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.Request current pricing
Condition: New Factory Sealed
AIR-AP1852I-B-K9: Controller migration and rollback record. Verify the exact PID, regulatory state and acceptance evidence before purchase.US$ 767.00
Condition: Condition confirmed by quotation
C9120AXP-A is the professional-installation 9120AXP Wi-Fi 6 access point with external antennas, not an internal-antenna AXI unit. Cisco specifies indoor installation and antenna selection subject to the regulatory domain.US$ 511.00
Condition: New Factory Sealed
C9120AXE-H is an indoor Wi-Fi 6 access point for separately purchased external antennas. It uses 4×4 radios on 2.4/5GHz, not an 8×8 tri-band Wi-Fi 6E design; the H suffix identifies its regulatory domain.US$ 151.00
Condition: New Factory Sealed
C9120AXI-H identifies the indoor internal-antenna 4×4 Wi-Fi 6 access point with H regulatory domain and a 2.5Gbps-capable Ethernet interface. Cisco moved this 9120AXI family’s end-of-sale date forward to July 31, 2026.US$ 1,315.00
Condition: New Factory Sealed
ISR4221X/K9 is the 8GB-DRAM version of the Cisco 4221 branch router, with two onboard Gigabit Ethernet interfaces and two NIM slots. Cisco ended sale in November 2023; final support is November 30, 2028, subject to entitlement.US$ 856.00
Condition: New Factory Sealed
C9117AXI-H is an indoor, internal-antenna Wi-Fi 6 access point for 2.4GHz and 5GHz, not a 6GHz Wi-Fi 6E product. Cisco lists an April 30, 2026 final support date for this exact order.US$ 172.00
Condition: New Factory Sealed
C1-N9K-C9372PX-E is the Cisco ONE Nexus order combining 48 10G SFP+ ports with six 40G QSFP+ ports. Cisco EOL12241 records end of sale on October 30, 2018 and final support on October 31, 2023.Request current pricing
Condition: New Factory Sealed
C1-N9K-C9332PQ is the Cisco ONE Nexus 9332 ACI leaf order with 32 40G QSFP ports. Its manufacturer end-of-sale date was March 5, 2019, and the amended bulletin records final support on March 31, 2024.Request current pricing
Condition: New Factory Sealed
C9300L-48PF-4G-E provides 48 Gigabit PoE+ access ports and four fixed 1G SFP uplinks. The Network Essentials configuration supports StackWise-320 and documents an 890W PoE budget with its 1100W AC supply.US$ 4,686.00
Condition: New Factory Sealed
IE-4010-16S12P combines twelve FE/GE fiber ports, four FE/GE SFP uplinks and twelve Gigabit copper PoE/PoE+ ports. This IE 4010 order reached Cisco end of sale in July 2026.US$ 4,159.00
Condition: New Factory Sealed
IE-4010-4S24P has 24 copper PoE/PoE+ ports plus four FE/GE SFP uplinks. Cisco ended sale of this order on July 31, 2026; its power budget depends on the installed supplies.US$ 4,900.00
Condition: New Factory Sealed
IE-1000-6T2T-LM is a non-PoE industrial switch with six Fast Ethernet downlinks and two Fast Ethernet copper uplinks. It uses 12–24V input and has a documented 5.3W consumption.US$ 665.00
Condition: New Factory Sealed
IE-1000-4P2S-LM connects four Fast Ethernet PoE endpoints and provides two Gigabit SFP uplinks. Its 120W PoE budget requires appropriately sized power; this is not the non-PoE 6T2T configuration.US$ 1,278.00
Condition: New Factory Sealed
C1-ASR1009X/K9 identifies the Cisco ONE ASR1009-X chassis with three line-card slots in 9RU. It uses an internal power shelf and redundant processor positions; Cisco’s exact-order lifecycle bulletin lists an October 2021 end of sale.US$ 7,500.00
Condition: New Factory Sealed
C1-ASR1006X/K9 is the Cisco ONE ASR1006-X chassis order: a 6RU modular router with two line-card slots. Power supplies fit its chassis shelf, not an external adapter; the exact C1 order is covered by Cisco EOL13868.US$ 6,340.00
Condition: New Factory Sealed
C9300L-48T-4X-10A identifies a 48-port data configuration with Network Advantage and four 10G uplinks in Cisco’s original-to-Refresh product mapping. Its C9300L uplinks are fixed, not an optional network-module expansion.US$ 4,290.00
- 1
- 15
- 16
- 17
- 18
- 19
- 97