AIR-AP1852I-E-K9C Cisco Aironet 1852i Internal Antennas Access Point

AIR-AP1852I-E-K9C exact order identity

AIR-AP1852I-E-K9C is a 1852i indoor access point with integrated omnidirectional antennas in the Cisco Aironet 1850 Series. This exact SKU combines regulatory-domain token E with a single-unit configurable K9C order. The platform is a dual-band 802.11ac Wave 2 access point with four 5 GHz spatial streams in single-user operation and three in multiuser operation.

Antenna and environmental boundary

Cisco rates the internal antenna system at 3 dBi for 2.4 GHz and 5 dBi for 5 GHz, with 360-degree horizontal beamwidth. No external antenna is selected by this SKU. Preserve enclosure orientation, bracket, mounting height and post-install coverage because placement determines how the integrated pattern is used.

Order and controller boundary

Cisco lists K9C as a configurable controller-based order, and its lifecycle table describes affected K9C lines as Mobility Express products. Retain the final domain and software role on the quotation and received unit. Prove the intended controller or Mobility Express state instead of inferring it from the suffix alone.

E regulatory-domain evidence

Cisco lists this profile as 2.4 GHz channels 1-13; 5 GHz blocks at 5.180-5.320 and 5.500-5.700 GHz, excluding 5.600-5.640 GHz. The E profile combines lower and middle 5 GHz operation but documents an internal exclusion in the middle block. Survey and controller evidence must show that the gap was understood. Compare the enabled channel export with the E-domain profile, paying particular attention to the excluded sub-block. Preserve the lookup date, country selection and controller result in the asset file.

Procurement inference: this profile's excluded middle sub-block creates a specific migration check. Preserve the prior controller channel template, then prove that the new or restored template does not reintroduce the excluded range. If channel capacity was calculated from a continuous middle block, correct the design assumptions and record the narrower usable plan before installation approval.

Power and interface boundary

The 1852 provides a PoE Gigabit uplink and a Gigabit AUX port for link aggregation. Cisco states that 802.3af disables AUX and USB on both antenna forms and reduces the 1852e 2.4 GHz radio from 3x4 to 2x3. Record negotiated power before promising the complete interface and radio state.

Deployment evidence worksheet

Survey-to-install reconciliation

Attach the approved RF survey location, mounting height, orientation, expected client density, channel width and neighboring-radio assumptions to the order. After installation, compare measured coverage and interference with that design. If ceiling construction, antenna placement or obstructions changed, document the deviation and repeat the affected measurements. This provides a site-specific acceptance reason for the exact unit instead of relying on a family data sheet alone. Relate the survey result to the 1852's 4x4:4 single-user and 4x4:3 multiuser 5 GHz design rather than treating the published 1.7 Gbps PHY rate as measured site throughput.

Serial-level asset control

Capture chassis serial, base MAC address, carton reference, deployment site, controller assignment and asset owner. Reconcile the identifiers against the purchase line before activation. Multi-unit cartons require an entry for every physical access point; a carton SKU alone cannot show which unit was installed, held as a spare or returned. This record is also needed to trace support entitlement, replacement history and monitoring ownership. If the product came from a ten-unit pack, the 1852 carton identity must be expanded into ten individual records before support, return or replacement handling.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Cisco explicitly makes the customer responsible for country approval; retain the lookup alongside the 1852's controller country and enabled-channel evidence.

Monitoring handover

Assign owners for AP reachability, controller join failures, radio utilization, client health and switch-port errors. Confirm that the exact serial appears in inventory and monitoring, then test the alert path. Record dashboard object, notification route and escalation owner. Telemetry that is not tied to an owned asset does not provide a reliable service baseline and will not support later comparison after channel or software changes. Monitoring should identify the 1852 serial, controller object, both Ethernet interfaces, radio health and the team responsible for end-of-support migration.

Change-window controls

Document staging evidence, production window, installer, rollback owner and measurable success criteria. Preserve the prior controller or AP state needed for recovery. After the change, close temporary credentials, compare authentication, monitoring and RF results with the approved baseline, and record the final decision. The work is not complete merely because the unit powers on or appears in a controller list. Rollback must account for controller image alignment, country configuration and any Mobility Express primary role, not only the physical swap.

Security baseline

Retain the approved controller policy, management authorization, certificate or trust workflow, client authentication test and logging destination. Confirm behavior on the deployed controller software instead of promising a protocol from the hardware family name. Remove temporary onboarding access and verify administrative reachability after handover. This keeps product identity separate from software-dependent security claims. Record the security behavior verified on the deployed controller release; do not turn a family data-sheet capability into an unconditional software claim.

Receiving inspection

At receipt, compare model label, regulatory token, antenna form, quantity, serials and visible condition with the authorized order. Photograph labels before cartons are separated. Quarantine shortages, mixed units, damaged connectors or unapproved substitutions. Do not rely on a distributor description as evidence that the exact Cisco order arrived. Close the inspection only when every physical unit is accounted for. Receiving inspection should distinguish the internal-antenna 1852i from the external-antenna 1852e and should verify all carton quantities before labels are separated.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard. The final handover should include the exact PID, regulatory approval, serial, antenna or mounting record, power mode, both Ethernet interfaces and lifecycle owner.

Lifecycle decision

Cisco ended sale of the Aironet 1850 Series on 1 May 2022, ended software maintenance on 1 May 2023 and lists 30 April 2027 as the last support date. Cisco identifies Catalyst 9115AX as the migration family. Available inventory does not extend those milestones.

Related Aironet 1852 order records

• AIR-AP1852E-EK910C - compare antenna form and domain evidence.
• AIR-AP1852E-E-K9 - compare antenna form and domain evidence.
• AIR-AP1852I-EK910 - compare order form and domain evidence.

Official evidence: Cisco Aironet 1850 Series data sheet; Cisco Aironet 1850 hardware guide; Cisco Aironet 1850 lifecycle bulletin; and Cisco wireless compliance tool.