Cisco AIR-AP2802I-H-K9 Aironet Wireless Access Point
- 763 412 7282
- +86 010 69614620
AIR-AP2802I-H-K9 Overview
AIR-AP2802I-H-K9 Radio and Regulatory Identity
AIR-AP2802I-H-K9 identifies the Aironet 2802i internal-antenna model in Cisco's H regulatory domain. Cisco describes the platform as an 802.11ac Wave 2 access point with 4x4 MU-MIMO and three spatial streams. The H suffix is part of the radio-compliance identity and must match the deployment country and controller configuration.
Controller, Power and Lifecycle
The 2802i provides two 100/1000BASE-T ports and requires 802.3at PoE+, Cisco UPOE or the supported AIR-PWRINJ6 injector. This K9 PID is not the K9C Mobility Express ordering code. Cisco has announced end of sale for the Aironet 2800 Series and identifies the Catalyst 9120AX Series as a migration option, so controller software and support status need explicit validation.
Purchase Checks
- Confirm H-domain legality for the installation country.
- Verify the wireless controller model and supported software release.
- Distinguish AIR-AP2802I-H-K9 from the K9C Mobility Express PID.
- Check PoE+, mounting bracket and lifecycle replacement requirements.
AIR-AP2802I-H-K9 Specification
| Exact model / SKU | AIR-AP2802I-H-K9 |
| Product type | Controller-based indoor access point |
| Regulatory domain | H |
| Wireless generation | 802.11ac Wave 2 |
| Radio capability | 4x4 MU-MIMO with three spatial streams |
| Antenna configuration | Internal antennas |
| Ethernet interfaces | 2 x 100/1000BASE-T |
| Power requirement | 802.3at PoE+, Cisco UPOE or AIR-PWRINJ6 |
| Source match | Exact AIR-AP2802I-H-K9 PID in Cisco product, field-notice and lifecycle documentation |
| Official manufacturer reference | Cisco Aironet 2800 Series official datasheet |
| Part numbers | ● AIR-AP2802I-x-K9: Dual-band, controller-based 802.11a/g/n/ac | ||||||
| Software | ● Cisco Unified Wireless Network Software Release 8.2.111.0 or later ● Cisco IOS ® XE Software Release 16.3 |
||||||
| Supported wireless LAN controllers | ● Cisco 2500 Series Wireless Controllers, Cisco 3500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex ® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 9800 Series Wireless Controllers, Cisco Virtual Wireless Controller ● Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches ● Cisco Mobility Express |
||||||
| 802.11n version 2.0 (and related) capabilities | ● 4x4 MIMO with three spatial streams ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g beamforming ● 20- and 40-MHz channels ● PHY data rates up to 450 Mbps (40 MHz with 5 GHz) ● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support |
||||||
| 802.11ac Wave 1 capabilities | ● 4x4 MIMO with three spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, and 80-MHz channels ● PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz) ● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) ● 802.11 DFS ● CSD support |
||||||
| 802.11ac Wave 2 capabilities | ● 4x4 MU-MIMO with three spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80, 160-MHz channels ● PHY data rates up to 4680 Mbps ● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) ● 802.11 DFS ● CSD support |
||||||
| Integrated antenna | Flexible radio (either 2.4 GHz or 5 GHz) ● 2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth ● 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90° Dedicated 5-GHz radio ● 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth |
||||||
| External antenna (sold separately) | ● 2802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) ● Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios |
||||||
| Smart antenna connector | ● Available on the 2802e Series access points only ● Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point ● Required when running the flexible radio as either a second 5-GHz serving radio or Wireless Security Monitoring radio |
||||||
| Interfaces | ● 2802I/E ◦ 2x 100/1000BASE-T autosensing (RJ-45) ● Management console port (RJ-45) ● USB 2.0 (enabled via future software) |
||||||
| Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors | ||||||
| Dimensions (W x L x H) | ● Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50” | ||||||
| Weight | Cisco Aironet 2802i ● 3.53 lb (1.6 kg) |
||||||
| Input power requirements | ● 802.3at PoE+, Cisco Universal PoE (Cisco UPOE ®) ● 802.3at power injector (AIR-PWRINJ6=) |
||||||
| Power draw | ● 22.5W at the PSE (20W at the PD) with all features enabled except for the USB 2.0 port ● 26.5W at the PSE (23W at the PD) with the USB 2.0 port enabled |
||||||
| Environmental | Cisco Aironet 2802i ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft. ● Operating temperature: 32° to 104°F (0° to 40°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft. |
||||||
| System memory | ● 1024 MB DRAM ● 256 MB flash |
||||||
| Warranty | Limited lifetime hardware warranty | ||||||
| Available transmit power settings | 2.4 GHz ● 23 dBm (200 mW) ● 20 dBm (100 mW) ● 17 dBm (50 mW) ● 14 dBm (25 mW) ● 11 dBm (12.5 mW) ● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW) ● 2 dBm (1.56 mW) |
5 GHz ● 23 dBm (200 mW) ● 20 dBm (100 mW) ● 17 dBm (50 mW) ● 14 dBm (25 mW) ● 11 dBm (12.5 mW) ● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW) ● 2 dBm (1.56 mW) |
|||||
| Frequency band and 20-MHz operating channels | H (H regulatory domain): ● 2.412 to 2.472 GHz; 13 channels ● 5.150 to 5.350 GHz; 8 channels ● 5.745 to 5.825 GHz; 5 channels |
||||||
| Maximum number of nonoverlapping channels | 2.4 GHz ● 802.11b/g: ◦ 20 MHz: 3 ● 802.11n: ◦ 20 MHz: 3 |
5 GHz ● 802.11a: ◦ 20 MHz: 25 FCC, 16 EU ● 802.11n: ◦ 20 MHz: 25 FCC, 16 EU ◦ 40 MHz: 12 FCC, 7 EU ◦ 20 MHz: 25 FCC, 16 EU ◦ 40 MHz: 12 FCC, 7 EU ◦ 80 MHz: 6 FCC, 3 EU ◦ 160 MHz 2 FCC, 1 EU |
|||||
| Compliance standards | ◦ UL 60950-1 ◦ CAN/CSA-C22.2 No. 60950-1 ◦ UL 2043 ◦ IEC 60950-1 ◦ EN 60950-1 ◦ EN 50155 for 2800e (Operating temperature -20° to 50°C) ● Radio approvals: ◦ FCC Part 15.107, 15.109, 15.247, 15.407, 14-30 ◦ RSS-247 (Canada) ◦ EN 300.328, EN 301.893 (Europe) ◦ ARIB-STD 66 (Japan) ◦ ARIB-STD T71 (Japan) ◦ EMI and susceptibility (Class B) ◦ ICES-003 (Canada) ◦ VCCI (Japan) ◦ EN 301.489-1 and -17 (Europe) ◦ EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC ● IEEE standards: ◦ IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d ◦ IEEE 802.11ac ● Security: ◦ 802.11i, Wi-Fi Protected Access 3 (WPA3), WPA2, WPA ◦ 802.1X ◦ Advanced Encryption Standards (AES) ● Extensible Authentication Protocol (EAP) types: ◦ EAP-Transport Layer Security (TLS) ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MCSHAPv2) ◦ Protected EAP (PEAP) v0 or EAP-MSCHAPv2 ◦ EAP-Flexible Authentication via Secure Tunneling (FAST) ◦ PEAP v1 or EAP-Generic Token Card (GTC) ◦ EAP-Subscriber Identity Module (SIM) ● Multimedia: ◦ Wi-Fi Multimedia (WMM) ● Other: ◦ FCC Bulletin OET-65C ◦ RSS-102 |
||||||
| Data rates supported | 802.11b: 1, 2, 5.5, and 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps 802.11n HT20: 6.5 to 216.7 Mbps (MCS0 to MCS23) 802.11n HT40: 13.5 to 450 Mbps (MCS0 to MCS23) 802.11ac VHT20: 6.5 to 288.9 Mbps (MCS0 to 8 – SS 1, MCS0 to 9 – SS 2 and 3) 802.11ac VHT40: 13.5 to 600 Mbps (MCS0 to 9 – SS 1 to 3) 802.11ac VHT80: 29.3 to 1300 Mbps (MCS0 to 9 – SS 1 to 3) 802.11ac VHT160: 58.5 to 2304 Mbps (MCS0 to 9 – SS 1 and 2, MCS0 to 8 – SS 3) |
||||||
AIR-AP2802I-H-K9 Warranty
 | Product Quotation |  | Condition and Packaging |
 | Technical Support Enquiry |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
AIR-AP2802I-H-K9 FAQ
What is AIR-AP2802I-H-K9?
Cisco AIR-AP2802I-H-K9 Aironet Wireless Access Point is a CISCO Aironet 2800 Series Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What wireless or client capacity is listed for AIR-AP2802I-H-K9?
For AIR-AP2802I-H-K9, the manufacturer specification lists wireless generation as 802.11ac Wave 2.
What interfaces and ports does AIR-AP2802I-H-K9 provide?
For AIR-AP2802I-H-K9, the manufacturer specification lists ethernet interfaces as 2 x 100/1000BASE-T.
Is AIR-AP2802I-H-K9 available from YYST Global?
Contact YYST Global to confirm availability for AIR-AP2802I-H-K9, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
What is the price of AIR-AP2802I-H-K9?
Please request a quote for AIR-AP2802I-H-K9. Final pricing depends on stock, quantity, configuration and delivery destination.
Related products
Related AIR-AP2802I-H-K9
Cisco AIR-AP2802I-Z-K9C Configurable Aironet 2802i Access Point
AIR-AP2802I-Z-K9C identifies a configurable Aironet 2802i order with the Z regulatory-domain token. It is an indoor, internal-antenna access point with two Gigabit Ethernet connections, not a Catalyst 9100.
Cisco AIR-AP2802I-D-K9I Aironet 2802i India-Only Access Point
Cisco identifies AIR-AP2802I-D-K9I as an India-only, controller-based Aironet 2802i order. This indoor access point has internal antennas; retain the final K9I suffix when checking the supplied product.
Cisco AIR-AP2802I-E-K9 Aironet 2802i E-Domain Indoor Access Point
AIR-AP2802I-E-K9 is the E-domain, controller-based Cisco Aironet 2802i indoor access point. It uses integrated antennas, 802.11ac Wave 2 radios and two Gigabit Ethernet interfaces; it is not a Catalyst 9100 model.
AIR-AP2802I-A-K9 Cisco Aironet 2800i Dual-band Access Point
AIR-AP2802I-A-K9 is a 2802I indoor access point with integrated antennas supplied as a single-unit, fixed regulatory-domain order with regulatory-domain token A. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.
AIR-AP2802I-C-K9 Cisco Aironet 2800i 802.11ac Wave 2 Access Point
AIR-AP2802I-C-K9 is a 2802I indoor access point with integrated antennas supplied as a single-unit, fixed regulatory-domain order with regulatory-domain token C. Cisco lists its channel profile as 2.4 GHz channels 1-13 and the 5.745-5.825 GHz upper block. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.
AIR-AP2802E-A-K9 Cisco Aironet 2800e Dual-band 802.11a/g/n/ac AP
AIR-AP2802E-A-K9 is a 2802E indoor access point for external antennas supplied as a single-unit, fixed regulatory-domain order with regulatory-domain token A. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.
AIR-AP2802E-A-K9C Cisco Aironet 2800e 802.11ac Wave 2 Access Point
AIR-AP2802E-A-K9C is a 2802E indoor access point for external antennas supplied as a single-unit, configurable order with regulatory-domain token A. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.
AIR-AP2802E-AK910 Cisco Aironet 2800e Eco-pack 4x4:3 MU-MIMO 10 APs
AIR-AP2802E-AK910 is a 2802E indoor access point for external antennas supplied as a fixed-domain ten-unit eco-pack with regulatory-domain token A. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.