Wireless - Page 11

Condition: New Factory Sealed

R7S99A is the US AP-584, an external-antenna outdoor Wi-Fi 6 access point in the HPE Aruba Networking 580 series. The official order identifies dual-radio 4×4 operation; it is not a 570-series model.

Condition: New Factory Sealed

C9120AXE-H is an indoor Wi-Fi 6 access point for separately purchased external antennas. It uses 4×4 radios on 2.4/5GHz, not an 8×8 tri-band Wi-Fi 6E design; the H suffix identifies its regulatory domain.

Condition: New Factory Sealed

C9120AXI-H identifies the indoor internal-antenna 4×4 Wi-Fi 6 access point with H regulatory domain and a 2.5Gbps-capable Ethernet interface. Cisco moved this 9120AXI family’s end-of-sale date forward to July 31, 2026.

Condition: New Factory Sealed

C9117AXI-H is an indoor, internal-antenna Wi-Fi 6 access point for 2.4GHz and 5GHz, not a 6GHz Wi-Fi 6E product. Cisco lists an April 30, 2026 final support date for this exact order.

Condition: Condition, accessories and support confirmed per order

CSE-200+ is a Barco ClickShare content-sharing system with HDMI input for wired sources and HDMI output for the room display. Two participants can present at once. Its presentation role is different from a wireless network controller.

Condition: Condition and supplied set confirmed by quotation

Barco CSE-800 is a ClickShare presentation system for shared meeting-room displays. It has two HDMI inputs and two HDMI outputs, with up to four shared sources per screen or eight across two screens. It is not a campus WLAN controller.

Condition: New Factory Sealed

ClickShare CSE-200 is a legacy meeting-room presentation base unit, not a campus wireless access point. Its specification separates 16 simultaneous connections from two sources displayed at once. Barco marks the model End of Life and identifies C-10 as its replacement.

Condition: New Factory Sealed

The 86-inch ClickShare X-Display Plus is an integrated meeting display with a CX-M presentation module, camera and room audio. Barco identifies regional article R9861686ZH; availability is limited to mainland China, Hong Kong and Macau. It is not wireless networking infrastructure.

Condition: New Factory Sealed

ClickShare C-10 is Barco wireless presentation equipment for meeting rooms. It supports two sources on screen and interactive presentation features; it is not campus WLAN infrastructure. Confirm the generation and one- or two-Button package before ordering.

Condition: New Factory Sealed

ClickShare X-Display Plus 65 combines a 65-inch 4K LCD, camera, microphone array and room speakers with a ClickShare CX-M module. It is an integrated meeting display, not an enterprise network switch. Barco limits availability to mainland China, Hong Kong and Macau.

Condition: Regional availability and condition require confirmation

Barco identifies ClickShare Wireless Speakerphone as article R9861660DM. It combines eight beamforming MEMS microphones with a 4 W speaker for meeting audio, rather than providing WLAN coverage. Manufacturer availability is limited to mainland China, Hong Kong and Macau.

Condition: Legacy unit; verify condition and regional article

WiCS-2100 is a wePresent wireless presentation receiver, not a campus network controller. It displays up to four shared sources through a 1080p HDMI output. Barco marks the product end of life and states that XMS Cloud no longer supports it.

Condition: Verify regional article, generation and condition before order

This C-5 listing specifies Barco’s Gen 2 ZH presentation unit, identified in the manufacturer’s ordering list as R9861605ZH. It shares one source on the meeting-room display and is not a campus access point or WLAN controller.

Condition: Regional article, condition and supplied accessories confirmed by quotation

The WA5530 is an indoor 802.11ac Wave 2 access point with three radios operating in the 2.4 GHz and 5 GHz bands. Its wired interfaces are two Gigabit Ethernet ports, not multi-gigabit uplinks.

Condition: Regional article, condition and power accessories confirmed by quotation

This EWP-WA5620i-ACN-FIT listing describes the H3C WA5620i-ACN dual-radio 802.11ac access point with internal antennas, one 2.5GE port and one GE port. The installation guide recommends 802.3at PoE+ to avoid 802.3af operating restrictions.

Condition: Condition, AP entitlement and supplied accessories confirmed on quotation

EWP-WX2560H is the H3C WX2560H wireless controller. Its hardware guide lists two Gigabit copper WAN ports, six Gigabit copper LAN ports and two SFP connections that share combo interfaces with corresponding copper ports.

Condition: Installed AP licenses, condition and supplied power adapter verified by quotation

EWP-WX2510H-PWR is the H3C WX2510H-PWR wireless controller with one Gigabit WAN port and four Gigabit PoE+ LAN ports. H3C lists a maximum of 16 managed APs and zero default managed-AP capacity.

Condition: Exact supplied unit, condition and mounting items confirmed on quotation

This listing is for the WA5320H wall-plate access point under the existing EWP-WA5320H-FIT order reference. H3C documents a dual-radio 802.11ac model with a rear Gigabit PoE uplink, three front Gigabit ports and RJ-45 pass-through connections.

Condition: Exact regional unit and accessories verified before purchase

EWP-WA6330-FIT is the H3C WA6330 six-stream, triple-radio Wi-Fi 6 FIT access point with internal antennas. It has a 2.5GbE-capable PoE input and a separate Gigabit Ethernet port with PoE output.

Condition: Condition and supplied accessories confirmed by quotation

EWP-WA6320-FIT identifies the H3C WA6320 indoor Wi-Fi 6 FIT access point. It uses internal antennas and two 2×2 radios, one at 2.4 GHz and one at 5 GHz, with a Gigabit Ethernet PoE input.