Cisco Routers - Page 4

Condition: End-of-support software article; legacy entitlement review required

ASR5K-00-PN01E0AU is the Cisco PDSN EV-DO Rev 0 to Rev A software upgrade article for 1K sessions. It is not a network switch. The applicable 3G CDMA software support endpoint was September 30, 2021.

Condition: Software license; installed-platform eligibility and sourcing require confirmation

Cisco identifies ASR5K-00-CS01ICAP as a Content Filtering ICAP Interface license for 1K sessions. ICAP means Internet Content Adaptation Protocol, not Intelligent Charging and Advanced Policy. The article is software, not a network switch.

Condition: Legacy software entitlement; license eligibility confirmed before quotation

ASR5K-00-CSXXDYNR is a Cisco software license for Dynamic RADIUS Extensions, including CoA and PoD. It is not a campus switch or a hardware module; the exact article appears in Cisco ASR5K software lifecycle notice EOL15581.

Condition: Legacy paper entitlement; sourcing and activation eligibility require verification

SLASR903-M-I= identifies the paper PAK upgrade from Metro Services to Metro IP Services for Cisco ASR 903. It is a software entitlement, not an enterprise switch. Cisco lists L-SLASR903-M-I= as its electronic replacement.

Condition: Legacy paper-license entitlement and usability verified before purchase

FLS-A901-4T= is the paper-license article for a four-port copper Gigabit Ethernet upgrade on supported Cisco ASR 901 routers. It corresponds to Gige4CuUpgrade, not an Ethernet switch or a hardware interface module.

Condition: Legacy electronic license eligibility and fulfillment subject to confirmation

L-FLS-A901-4S= is the electronic-delivery ASR 901 four-port SFP Gigabit Ethernet upgrade license. Cisco maps Gige4SfpUpgrade to A901-4C-F-D and A901-4C-FT-D, rather than the ASR 9000 family.

Condition: Legacy electronic entitlement; eligibility and fulfillment verified before order

L-FLS-A901-2Z= is the electronic fulfillment article for the Cisco ASR 901 two-port 10GE upgrade. Cisco lists it with the 10gigUpgrade feature for applicable A901-6CZ chassis, separately from the physical FLS-A901-2Z article.

Condition: Legacy feature-license fulfillment and entitlement eligibility require confirmation

FLS-A901-2Z is the Cisco ASR 901 two-port 10GE upgrade feature license, identified as physical fulfillment in Cisco EOL13051. It is not a four-year DNA Premier subscription or a switch chassis.

Condition: License entitlement and fulfillment eligibility confirmed by quotation

A9K-9001-OPT-LIC= is the Cisco ASR 9001 Advanced Optical License. It is a software-license order, not an Ethernet switch, router chassis or optical transceiver.

Condition: Cable condition and supplied assembly confirmed by quotation

CABLE-16T1E1 is the 12-foot cable for a 16-port T1/E1 interface module, listed in Cisco ASR 900-series documentation. It is not a network switch.

Condition: Condition and supplied configuration confirmed by quotation

Cisco C8500-12X4QC is a Catalyst 8500 edge routing platform with twelve 1/10GE, two 40/100GE and two 40GE interface options. Up to 240GE of ports can be enabled simultaneously; confirm the required port combination.

Condition: Entitlement and supply eligibility require confirmation

Cisco defines ASR5K-SW-R9U-K9 as ASR 5000 System Software, Release 9 UMTS. The item is software for a legacy mobile-core platform, not a physical router or an expansion module.

Condition: Entitlement and supply eligibility require confirmation

ASR5K-SW-R8U-K9 identifies Cisco ASR 5000 system software, Release 8 UMTS. It is not ASR 9000 hardware or a router line card. Cisco lists this exact software code in its Release 8.0 end-of-life bulletin.

Condition: New Factory Sealed

ASR5K-0110G-SM-K9 CISCO enterprise IT hardware. Contact YYST Global for stock, lead time and quote support.

Condition: Condition confirmed by quotation

This listing describes ASR-9010-DC-V2, the Cisco ASR 9010 DC chassis configuration with Version 2 power entry modules. ASR 9010 is part of ASR 9000, not the smaller ASR 900 family, and uses a 21 RU chassis.

Condition: Condition confirmed by quotation

ASR-9006-AC identifies a Cisco ASR 9006 AC chassis ordering configuration associated with the Version 1 power bundle. The chassis is 10 RU with four line-card positions and two RSP positions; the installed power generation must be verified.

Condition: Condition confirmed by quotation

Cisco SPA-8XT3/E3 is an eight-port clear-channel T3/E3 shared port adapter for documented ASR 1000 configurations. Ports can be set to T3 or E3. It must not be described as a channelized T1/E1 breakout adapter.

Condition: Condition confirmed by quotation

Cisco SPA-10X1GE-V2 provides ten Gigabit Ethernet interfaces through pluggable SFPs. This Version 2 shared port adapter is double-height; ten 1 GE ports must not be confused with a 10 GE interface.

Condition: Condition confirmed by quotation

SPA-2XOC12-POS is a Cisco two-port Packet over SONET/SDH shared port adapter. The ASR 9000 hardware guide identifies it as single-height with OC-3/STM-1 and OC-12/STM-4 operation, supported from IOS XR 4.3.0.

Condition: Condition confirmed by quotation

Cisco A9K-MPA-4X10GE is a four-port 10 Gigabit Ethernet modular port adapter. Cisco lists it for the ASR 9001 with IOS XR 4.2.1 or later; it is not a complete router.