AIR-AP1815W-E-K9C Cisco Aironet 1815W Bluetooth 4 Mobility Express AP

AIR-AP1815W-E-K9C exact wall-plate order

AIR-AP1815W-E-K9C is a compact Cisco Aironet 1815w access point for wall or junction-box installation in hospitality, residence and multi-dwelling environments. It supports concurrent 2.4-GHz and 5-GHz 2x2 radios with two spatial streams and integrated antennas.

Software order boundary

Cisco defines AIR-AP1815W-x-K9C as the order whose default software option is Mobility Express. Used inventory may have been reimaged, so preserve running software, current role, configuration backup and recovery evidence.

E regulatory evidence

The domain letter is an ordering identifier, not a country name. Associate the E-domain compliance result with the installed controller object and repeat the check after any country-setting migration.

Use controller migration as the E-domain evidence scenario. Export the existing country and radio configuration before the move, then compare the post-migration state with the dated Cisco compliance result. Keep both observations beside the exact PID and serial. Unchanged client connectivity is not enough because it does not show that the intended regulatory configuration survived.

Room-side Ethernet and PoE boundary

The 1815w provides one Gigabit uplink, three local Gigabit Ethernet ports and one passive RJ-45 pass-through path. LAN 1 can provide 802.3af Class 0 PoE-out only when the AP itself receives 802.3at; there is no PoE output when the AP receives 802.3af.

Mounting and antenna boundary

The unit uses integrated dual-band antennas with approximately 2 dBi peak gain at 2.4 GHz and 3 dBi at 5 GHz. It installs vertically with AIR-AP-BRACKET-W3; AIR-AP1815W-KIT is a separate spacer and RJ-45 jumper option when the cabling path requires it.

Lifecycle decision

Cisco lists the Aironet 1815 family as end of sale, publishes 2027-04-30 as the last support date and identifies the Catalyst 9105AX Series as the migration family. Existing stock does not extend that support date.

Room deployment evidence worksheet

Mechanical installation record

List the bracket, ceiling or wall interface, enclosure requirement, safety restraint, service clearance and cable-entry plan before scheduling installation. Receiving should identify missing mechanical items before the access point reaches site. Photograph the mounted label and final cable entry, then record how the unit can be reached for replacement. A complete electronic order can still be an unusable deployment kit when mechanical dependencies are omitted. Reconcile AIR-AP-BRACKET-W3, the Torx screw and any AIR-AP1815W-KIT spacer or jumper.

Serial-level asset control

Capture chassis serial, base MAC address, carton reference, deployment site, controller assignment and asset owner. Reconcile the identifiers against the purchase line before activation. Multi-unit cartons require an entry for every physical access point; a carton SKU alone cannot show which unit was installed, held as a spare or returned. This record is also needed to trace support entitlement, replacement history and monitoring ownership. Link serial, base MAC, room, controller object and local wired-port assignments before activation.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Save a dated Cisco compliance lookup; successful radio operation does not establish country approval.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a nearby Aironet 1815w line merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here. A changed domain letter or K9/K9C suffix is a different 1815w procurement identity.

Interference baseline

Preserve the pre-install and post-install noise, neighboring-radio and channel-occupancy observations for the selected location. Record any controller-driven channel change during acceptance. If the regulatory profile limits the channel choices, state how that constraint affected reuse and mitigation. This baseline gives future troubleshooting a reference point and prevents an unrelated interference change from being attributed to the hardware order. Preserve the controller country and enabled-channel export after join or software conversion.

Replacement dependency map

Map this unit to controller, licenses, authentication services, switch power, cable, bracket, antenna design and monitoring objects. For an end-of-sale platform, state which dependencies can be reused by the planned Catalyst migration and which require change. A nominal access-point replacement can fail when the surrounding platform was never inventoried. Keep the map with the asset rather than only in a one-time project file. Compare the Catalyst 9105AX migration with wall mounting, ports, PoE-out, software and coverage needs.

Receiving inspection

At receipt, compare model label, regulatory token, antenna form, quantity, serials and visible condition with the authorized order. Photograph labels before cartons are separated. Quarantine shortages, mixed units, damaged connectors or unapproved substitutions. Do not rely on a distributor description as evidence that the exact Cisco order arrived. Close the inspection only when every physical unit is accounted for. Receiving must identify the wall-plate 1815w and distinguish K9 from K9C before staging.

Fault-domain separation

Build the acceptance record so power, wired link, controller join, radio state, authentication and application reachability can be reviewed independently. Preserve timestamps and device identifiers across switch and controller logs. When a test fails, identify the failing boundary before replacing hardware. This avoids classifying a cable, policy or controller problem as an access-point defect and creates evidence that can be reused during support escalation. Use synchronized switch, AP, controller and wired-client events to isolate room-service faults.

Related Aironet 1815w order records

• AIR-AP1815W-E-K9 - compare software order and regulatory-domain evidence.
• AIR-AP1815W-I-K9 - compare software order and regulatory-domain evidence.
• AIR-AP1815W-Z-K9 - compare software order and regulatory-domain evidence.

Official evidence: Cisco Aironet 1815w data sheet; Cisco 1815w getting-started guide; Cisco wall-plate deployment guide; Cisco 1815 lifecycle bulletin; and Cisco compliance lookup.