AIR-AP1815T-B-K9 Cisco Aironet 1815t Teleworker Access Point

AIR-AP1815T-B-K9 Exact Teleworker Order

AIR-AP1815T-B-K9 is Cisco's B-domain Aironet 1815t controller-based 802.11ac Wave 2 order. The 1815t is designed for teleworker and micro-branch OfficeExtend use; it is not the wall-plate 1815w or the general indoor 1815i.

Remote-office network boundary

The AP supplies one Gigabit WAN/uplink interface and three local Gigabit Ethernet ports while its simultaneous dual-band 2x2 radios provide two spatial streams. Record the ISP handoff, addressing, tunnel/controller reachability and VLAN or policy assignment for each occupied local port.

B-domain compliance evidence

The domain letter is an order-control token rather than a country name. Match the B-domain carton label to the purchase line before serial assignment, then archive the dated compliance lookup.

Build the B-domain record around quotation-to-asset traceability. Preserve the authorized line, received label, chassis serial, assigned site and reviewer as one chain. If the controller later moves to another country configuration, open a new approval event rather than overwriting the original evidence; the history should explain both the purchased identity and every deployment decision.

B-domain field acceptance

For the B-domain order, preserve carton labeling and dated approval before serial assignment. Commission the AP behind the actual modem or router, record NAT behavior and MTU, and test controller reconnection after both broadband and power interruptions.

Power and staging plan

The desktop-oriented unit can use its documented power path and integrated antennas. Stage controller reachability, software, regulatory country, WAN behavior and local ports at the corporate site before shipment, but repeat the WAN and compliance checks at the final destination.

Teleworker operations worksheet

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. For this B-domain teleworker order, tie the result to the remote-user circuit, controller object and exact AP serial.

Software lifecycle file

Record the controller release approved for this unit, the source used to verify support, the last tested date and the owner for software advisories. Available hardware does not prove compatibility with a current or future controller train. Review Cisco support information before every expansion or replacement. The lifecycle file should also state when this Aironet generation must leave service and which surrounding dependencies need migration. For this B-domain teleworker order, tie the result to the remote-user circuit, controller object and exact AP serial.

Monitoring handover

Assign owners for AP reachability, controller join failures, radio utilization, client health and switch-port errors. Confirm that the exact serial appears in inventory and monitoring, then test the alert path. Record dashboard object, notification route and escalation owner. Telemetry that is not tied to an owned asset does not provide a reliable service baseline and will not support later comparison after channel or software changes. For this B-domain teleworker order, tie the result to the remote-user circuit, controller object and exact AP serial.

Security baseline

Retain the approved controller policy, management authorization, certificate or trust workflow, client authentication test and logging destination. Confirm behavior on the deployed controller software instead of promising a protocol from the hardware family name. Remove temporary onboarding access and verify administrative reachability after handover. This keeps product identity separate from software-dependent security claims. For this B-domain teleworker order, tie the result to the remote-user circuit, controller object and exact AP serial.

Lifecycle decision

Cisco lists the Aironet 1815 family as end of sale, gives 30 April 2027 as the last support date and identifies Catalyst 9105AX as the migration family. Compare remote-site WAN behavior, controller architecture, wired-port needs, power and desk placement before choosing a replacement.

Official sources: Cisco Aironet 1815t data sheet, Cisco 1815t getting-started guide, Cisco 1815t teleworker deployment guide, Cisco 1815 lifecycle notice and Cisco compliance lookup.