AIR-AP1815I-H-K9C Cisco Aironet 1815I Bluetooth 4 Mobility Express AP

AIR-AP1815I-H-K9C exact order identity

AIR-AP1815I-H-K9C is an indoor Cisco Aironet 1815i 802.11ac Wave 2 access point. It uses internal antennas only, supports concurrent 2.4-GHz and 5-GHz radios with 2x2 MIMO and two spatial streams, and provides one 10/100/1000 Ethernet uplink with 802.3af/at PoE.

Software order boundary

Cisco identifies K9C as the configurable order whose default software option is Mobility Express. Used stock may have been converted or reimaged, so retain the running image, current role, configured country, management backup and recovery result.

H regulatory-domain evidence

The domain letter is an ordering identifier, not a country name. Capture the H-domain lookup date, reviewer and destination; a successful controller join does not replace this evidence.

Build the H-domain evidence around staged controller join. Capture the lookup, destination, controller country, software release and first successful join without treating the join itself as regulatory proof. Before production release, a reviewer should reconcile all five fields. A later controller reset or country change should create a new dated result while retaining the accepted baseline.

Integrated antenna and installation boundary

Cisco documents two integrated 2.4-GHz antennas and two integrated 5-GHz antennas. There is no external-antenna conversion in this PID. Reconcile AIR-AP-BRACKET-8 or other selected mounting hardware and verify the final wall or ceiling placement against the RF survey.

Lifecycle decision

Cisco lists this product family as end of sale, identifies Catalyst 9105AX as the migration direction and publishes 30 April 2027 as the last support date. Available inventory does not extend that date.

Deployment evidence worksheet

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Cisco makes the customer responsible for country approval; save the compliance lookup and controller country.

Software lifecycle file

Record the controller release approved for this unit, the source used to verify support, the last tested date and the owner for software advisories. Available hardware does not prove compatibility with a current or future controller train. Review Cisco support information before every expansion or replacement. The lifecycle file should also state when this Aironet generation must leave service and which surrounding dependencies need migration. The Aironet 1815 lifecycle record governs software and replacement planning even when hardware remains available.

Monitoring handover

Assign owners for AP reachability, controller join failures, radio utilization, client health and switch-port errors. Confirm that the exact serial appears in inventory and monitoring, then test the alert path. Record dashboard object, notification route and escalation owner. Telemetry that is not tied to an owned asset does not provide a reliable service baseline and will not support later comparison after channel or software changes. Monitoring should join AP serial, controller state, radio health, Ethernet errors and client experience.

Security baseline

Retain the approved controller policy, management authorization, certificate or trust workflow, client authentication test and logging destination. Confirm behavior on the deployed controller software instead of promising a protocol from the hardware family name. Remove temporary onboarding access and verify administrative reachability after handover. This keeps product identity separate from software-dependent security claims. Record only security settings demonstrated on the deployed controller or Mobility Express release.

Interference baseline

Preserve the pre-install and post-install noise, neighboring-radio and channel-occupancy observations for the selected location. Record any controller-driven channel change during acceptance. If the regulatory profile limits the channel choices, state how that constraint affected reuse and mitigation. This baseline gives future troubleshooting a reference point and prevents an unrelated interference change from being attributed to the hardware order. Preserve active country and legal channel state after controller changes or a Mobility Express conversion.

Replacement dependency map

Map this unit to controller, licenses, authentication services, switch power, cable, bracket, antenna design and monitoring objects. For an end-of-sale platform, state which dependencies can be reused by the planned Catalyst migration and which require change. A nominal access-point replacement can fail when the surrounding platform was never inventoried. Keep the map with the asset rather than only in a one-time project file. Cisco names Catalyst 9105AX as the migration family; validate controller, power, mounting and coverage changes.

Fault-domain separation

Build the acceptance record so power, wired link, controller join, radio state, authentication and application reachability can be reviewed independently. Preserve timestamps and device identifiers across switch and controller logs. When a test fails, identify the failing boundary before replacing hardware. This avoids classifying a cable, policy or controller problem as an access-point defect and creates evidence that can be reused during support escalation. Use synchronized switch, AP and controller events to separate power, CAPWAP, RF and authentication faults.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard. Handover should include exact PID, serial, compliance lookup, software role, mounting record and lifecycle owner.

Related Aironet 1815i order records

• AIR-AP1815I-E-K9 - compare software order and regulatory-domain evidence.
• AIR-AP1815I-F-K9 - compare software order and regulatory-domain evidence.
• AIR-AP1815I-E-K9C - compare software order and regulatory-domain evidence.

Official evidence: Cisco 1815i data sheet; Cisco 1815i getting started guide; Cisco Aironet 1815 lifecycle bulletin; Cisco support page; and Cisco compliance lookup.