Brand procurement
Browse HP products for enterprise network, security, wireless, server and data center hardware. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.

Recently updated

J9371AAE is an electronic license-to-use order adding 40 access-point capacity to supported HP MSM controllers. It is not an access point, a radio, or a controller appliance; hardware specifications do not describe this license.

HPE 875655-001 is a 480GB Read Intensive solid-state drive with a 6Gb/s SATA interface. The hot-plug 2.5-inch SFF assembly uses a Smart Carrier and digitally signed firmware; it is an SSD, not a rotating SAS hard disk.

HPE 743183-001 is a 4TB SAS hard drive listed for 3PAR StoreServ 7000 systems and the M6720 drive enclosure. Its specifications are 7,200 rpm, 6Gb/s SAS and 3.5-inch LFF; the documented 3PAR drive model is HMRP4000S5xnN7.2.

HPE 658102-001 is the 2TB, 7,200-rpm SATA Midline drive assembly with a 6Gb/s interface and 3.5-inch LFF form factor. It includes the SmartDrive Carrier form of hot-plug assembly and is not specified for MSA products.

HPE 657739-001 is a 1TB Midline SATA hard disk in a hot-plug 3.5-inch LFF SmartDrive Carrier assembly. The drive is rated at 7,200 rpm with a 6Gb/s SATA interface, and HPE identifies it as unsuitable for MSA products.

HPE 653957-001 is a 600GB enterprise hard drive with dual-port SAS, a 6Gb/s interface rating and a 10,000-rpm spindle. The hot-plug 2.5-inch SFF assembly uses a SmartDrive Carrier; HPE explicitly excludes use in MSA products.

HPE 693569-001 identifies a 300GB rotating hard drive with a SAS interface, 6Gb/s link rating, 10,000-rpm spindle speed and 2.5-inch form factor. HPE PartSurfer lists this exact assembly in a ProLiant ML350 Gen9 component bill of materials.

HPE P06188-001 is a 16GB registered SmartMemory module: one 16GB DIMM, dual-rank x8 organization and DDR4-2933 with CAS 21-21-21 timing. It is server memory, not a complete server.
HP buyers should validate exact manufacturer part number, interfaces, power and compatible accessories, condition, warranty, lead time and support status. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: New Factory Sealed
J9421A ARUBA wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.US$ 200.00
Condition: New Factory Sealed
J9420A ARUBA wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.US$ 200.00