Condition: New Factory Sealed

ASR-9001-2P-L-KIT is Cisco’s ASR 9001 two-post mounting kit for a 23-inch rack. It is not the standard 19-inch ASR-9001-2P-KIT.

Condition: New Factory Sealed

ASR5K-FLTR-AIR= is Cisco’s spare air-filter PID for the ASR 5000 chassis. It is a replaceable particulate filter mounted above the lower fan tray, not a fan tray or PFU.

Condition: New Factory Sealed

ASR5K-PFU is Cisco’s non-redundant single 165A Power Filter Unit for the ASR 5000 chassis. It accepts the site DC feed; it is not an AC power supply.

Condition: New Factory Sealed

ACX7300-2CD4C is Juniper's ordering code for the ACX7K3-FPC-2CD4C pluggable Flexible PIC Concentrator. It provides six front-panel ports: two 400GbE and four 100GbE, with supported lower-speed operating modes documented by Juniper.

Condition: New Factory Sealed

ACX-MIC-16CHE1-T1-CE is Juniper's 16-port channelized E1/T1 circuit-emulation MIC for the ACX4000 router. It uses RJ-48 interfaces and requires 26.55 W; verify ACX4000 lifecycle and Junos compatibility before procurement.

Condition: New Factory Sealed

ASR1004 is Cisco's 4RU modular ASR 1000 chassis PID with dual power supplies, eight SPA positions, one ESP slot, one route-processor slot and two SIP slots.

Condition: New Factory Sealed

C1-ASR1004/K9 is the Cisco ONE ordering PID for an ASR 1004 chassis with IP Base, APIC-EM and APIs; Cisco ONE software suites and support require separate entitlement confirmation.

Condition: New Factory Sealed

A99-16X100GE-X-SE= is the spare PID for Cisco's fourth-generation ASR 9900 16-port 100GE Service Edge line card.

Condition: New Factory Sealed

A9K-MPA-32X1GE is Cisco's ASR 9000 32-port 1-Gigabit Ethernet Modular Port Adapter supporting SFP/CSFP media and MACsec.

Condition: New Factory Sealed

A99-48X10GE-1G-TR is Cisco's ASR 9900 48-port dual-rate 10GE/1GE packet-transport line card using SFP+ and SFP optics.

Condition: New Factory Sealed

A9K-20HG-FLEX-FC= is the spare PID for Cisco's fifth-generation ASR 9000 2T multi-rate Flexible Consumption combo line card.

Condition: New Factory Sealed

A99-32HG-FC= is the spare PID for Cisco's fifth-generation ASR 9900 3.2T Flexible Consumption line card.

Condition: New Factory Sealed

A99-32X100GE-FC= is the spare PID for Cisco's fourth-generation ASR 9900 32-port 100GE Flexible Consumption line card.

Condition: New Factory Sealed

A99-32X100GE-X-TR is Cisco's fifth-generation ASR 9900 3.2T packet-transport line card with 32 QSFP28/QSFP+ 100GE ports.

Condition: New Factory Sealed

A9K-16X100GE-FC is Cisco's fourth-generation ASR 9000 16-port 100GE Flexible Consumption line card for supported modular chassis.

Condition: New Factory Sealed

A9K-20HG-FLEX-TR= is the spare PID for Cisco's fifth-generation ASR 9000 packet-transport 2T multi-rate combo line card.

Condition: New Factory Sealed

ASR5K-011G2-LX-K9= is Cisco's spare PID for the second-generation ASR 5000 GLC2 one-port Gigabit Ethernet line card supplied with a 1000BASE-LX single-mode SFP.

Condition: New Factory Sealed

ASR5K-SW-R8C-K9= is Cisco's spare orderable PID for ASR 5000 Release 8 CDMA and general system software.

Condition: New Factory Sealed

ASR5K-SW-R8C-K9 identifies Cisco ASR 5000 Release 8 system software for CDMA and general functions; Cisco later named Release 12.0 software as its migration replacement.

Condition: New Factory Sealed

ASR5K-4OC3C-MM-K9= is the spare PID for Cisco's ASR 5000 OLC2 four-port ATM STM-1c/OC-3c line card with multimode SFP interfaces.