Enterprise IT Network Hardware Products - Page 81

Condition: New Factory Sealed

Juniper ACX7100-48L-DC-AO is a 4.8Tbps, 1U Cloud Metro Router with 48 SFP56 ports, six QSFP56-DD ports, redundant DC power and front-to-back Air-Out cooling.

Condition: New Factory Sealed

Juniper ACX7100-48L-DC-AI is a 4.8Tbps, 1U Cloud Metro Router with 48 SFP56 ports, six QSFP56-DD ports, redundant DC power and back-to-front Air-In cooling.

Condition: New Factory Sealed

ACX5448-M-DC-AFO is the DC-powered ACX5448-M with front-to-back airflow; its exact suffix fixes AC or DC power and AFI or AFO cooling.

Condition: New Factory Sealed

ACX5448-M-DC-AFI is the DC-powered ACX5448-M with back-to-front airflow; its exact suffix fixes AC or DC power and AFI or AFO cooling.

Condition: New Factory Sealed

ACX5448-M-AC-AFO is the AC-powered ACX5448-M with airflow-out, front-to-back cooling; its exact suffix fixes AC or DC power and AFI or AFO cooling.

Condition: New Factory Sealed

ACX5448-M-AC-AFI is the AC-powered ACX5448-M with airflow-in, back-to-front cooling; its exact suffix fixes AC or DC power and AFI or AFO cooling.

Condition: New Factory Sealed

EX2300-24T is a Juniper fixed Ethernet access switch with 24 non-PoE Gigabit copper ports and four 1/10GbE SFP/SFP+ uplinks.

Condition: New Factory Sealed

EX2300-24P is a Juniper fixed Ethernet access switch with 24 PoE/PoE+ Gigabit copper ports and four 1/10GbE SFP/SFP+ uplinks.

Condition: New Factory Sealed

EX-SFP-GE80KCW1490 is a Juniper Gigabit Ethernet CWDM SFP using a 1490nm channel and duplex LC single-mode fiber for links up to 80km.

Condition: New Factory Sealed

EX-SFP-GE10KT14R13 is a Juniper 1000BASE-BX SFP transmitting at 1490nm and receiving at 1310nm over one single-mode fiber for up to 10km.

Condition: New Factory Sealed

EX-SFP-GE10KT13R14 is a Juniper 1000BASE-BX SFP transmitting at 1310nm and receiving at 1490nm over one single-mode fiber for up to 10km.

Condition: New Factory Sealed

EX-SFP-FE20KT13R15 is a Juniper 100BASE-BX Fast Ethernet SFP using Tx 1310nm and Rx 1550nm over one single-mode fiber for links up to 20km.

Condition: New Factory Sealed

EX-SFP-1FE-FX is a Juniper 100BASE-FX SFP with an LC connector, 1310nm wavelength and 2km reach on multimode fiber.

Condition: New Factory Sealed

EX-SFP-10GE-USR is a Juniper 10GbE SFP+ optical transceiver using 850nm multimode fiber, with published reach of 10m on OM1, 20m on OM2 and 100m on OM3.

Condition: New Factory Sealed

Juniper EX-SFP-10GE-SR (part 740-021308) is an 850nm 10GBASE-SR SFP+ optical transceiver with duplex LC and DOM; Juniper lists up to 300m on OM3 and up to 400m on OM4 multimode fiber.

Condition: New Factory Sealed

Juniper EX-SFP-10GE-LRM (part 740-021310) is a 10GBASE-LRM SFP+ optical transceiver with a 1310nm duplex LC interface, DOM, up to 300m reach on supported single-mode fiber and up to 220m on supported multimode fiber.

Condition: New Factory Sealed

EWP-WA5320-C-FIT is the Fit ordering variant of H3C WA5320-C, a dual-radio 802.11ac Wave 2 indoor access point with two PoE-capable Gigabit Ethernet interfaces.

Condition: New Factory Sealed

RF-TXRM-915 is Contacta's 915 MHz stationary rack transmitter variant for USA/AU, paired with the frequency-matched RF-RX1-915 receiver and supplied with rack ear, TNC rod antenna, earthing cable and regional power adaptor.

Condition: New Factory Sealed

RF-TXRM-865 is Contacta's 865 MHz stationary rack transmitter variant for UK/EU, paired with the frequency-matched RF-RX1-865 receiver and supplied with rack ear, TNC rod antenna, earthing cable and regional power adaptor.

Condition: New Factory Sealed

Contacta V15a+ is a dual-output constant-current hearing loop driver with an integral phase shifter for phased-array installations.