Condition: New Factory Sealed

CNSNS-LIC-S5700-S-48P is a license entitlement for the S5700 S tier and a forty-eight-port class. This listing is not a switch appliance.

Condition: New Factory Sealed

CNSNS-LIC-S5700-EI-48P is a license entitlement for the S5700 EI tier and a forty-eight-port class. It does not include hardware.

Condition: New Factory Sealed

CNSNS-LIC-S5700-EI-24P is a license entitlement for the S5700 EI tier and a twenty-four-port class. No switch chassis is included.

Condition: New Factory Sealed

CNSNS-LIC-S5700-S-8P is a license entitlement scoped to the S5700 S tier and an eight-port class. It is not a physical switch.

Condition: New Factory Sealed

S2750-20TP-PWR-EI-AC is the sixteen-downlink PoE model in this pair, concentrating powered access on a smaller endpoint population. Its official device power ceiling is below four-hundred-forty watts, while the PoE budget is below three-hundred-seventy-five watts. The sixteen-port layout has eight fewer downlinks but a slightly higher published aggregate PoE allowance than S2750-28TP-PWR-EI-AC.

Condition: New Factory Sealed

S2750-28TP-PWR-EI-AC is the twenty-four-downlink PoE model in this pair, providing eight more powered copper endpoint positions than S2750-20TP-PWR-EI-AC. Its official device power ceiling is below four-hundred-forty-five watts, including a PoE budget below three-hundred-seventy watts. This SKU distributes the published PoE capacity across the larger twenty-four-port access population.

Condition: New Factory Sealed

S2730S-S24FT4S-A has a published typical power figure of thirty-two-point-seven watts and maximum power of forty-seven-point-six watts. Its specified long-term operating humidity range is five to ninety-five percent noncondensing.

Condition: New Factory Sealed

EX2300-48T is the forty-eight-port copper access configuration with four one-or-ten-gigabit SFP/SFP+ uplinks. Its official wire-speed forwarding figure is one-hundred-thirty million packets per second, and the fixed platform can participate in a Virtual Chassis of up to four switches.

Condition: New Factory Sealed

S1730S-H48T4S-A doubles copper access density to forty-eight Gigabit Ethernet ports while retaining four Gigabit SFP uplinks. It uses a built-in AC power module and is listed at seventy-seven-point-three-eight million packets per second forwarding performance.

Condition: New Factory Sealed

S1730S-S24T4S-A provides twenty-four copper Gigabit Ethernet access ports and four Gigabit SFP uplinks. The manufacturer lists one-hundred-sixty-eight-gigabit switching capacity, forty-one-point-six-six-million-packet forwarding performance and a thirty-four-watt maximum power figure.

Condition: New Factory Sealed

S2700-9TP-EI-AC is the compact model with eight Fast Ethernet downlinks and one dual-purpose Gigabit uplink. It is listed at two-point-seven million packets per second and uses a twenty-five-centimetre-wide enclosure. S2700-18TP-EI-AC doubles both downlink and uplink counts.

Condition: New Factory Sealed

S2700-18TP-EI-AC provides sixteen Fast Ethernet downlinks and two dual-purpose Gigabit uplinks. Its official forwarding rate is five-point-four million packets per second, and the chassis is forty-four-point-two centimetres wide. S2700-9TP-EI-AC halves downlink density and uses a much narrower enclosure.

Condition: New Factory Sealed

S2750-28TP-EI-AC is the non-PoE member of this twenty-four-port Fast Ethernet pair. Its chassis depth is two-hundred-twenty millimetres, approximate weight is below three kilograms and power consumption is below fifteen-point-seven watts. S2751-28TP-PWR-EI-AC is deeper and designed to supply endpoint power.

Condition: New Factory Sealed

S2751-28TP-PWR-EI-AC is the PoE-capable member of this twenty-four-port Fast Ethernet pair. Its deeper chassis supports a power ceiling below one-hundred-forty-seven watts, including up to one-hundred-twenty-four watts for PoE loads. S2750-28TP-EI-AC is the shallower non-PoE switch with much lower consumption.

Condition: New Factory Sealed

PA-5220 is the entry capacity model in this PA-5200 comparison. It is specified for eighteen-point-five-gigabit App-ID firewall throughput, nine-point-two-gigabit threat prevention, five-gigabit IPsec VPN throughput and four-million sessions. The shared redundant power and storage layout does not imply the performance of the higher PA-5200 models.

Condition: New Factory Sealed

PA-5250 is the intermediate PA-5200 capacity tier between PA-5220 and the PA-5260/PA-5280 models. Official values are thirty-five-point-nine-gigabit App-ID firewall throughput, twenty-point-three-gigabit threat prevention, fourteen-gigabit IPsec VPN throughput and eight-million sessions.

Condition: New Factory Sealed

PA-5260 has the highest listed App-ID firewall throughput in this PA-5200 comparison at seventy-two-point-two gigabits. It supports thirty-two-million sessions, thirty-gigabit threat prevention and twenty-one-gigabit IPsec VPN throughput. PA-5280 favors greater session scale, while PA-5250 and PA-5220 are lower-capacity tiers.

Condition: New Factory Sealed

PA-5280 combines the largest session scale in this PA-5200 group with sixty-eight-gigabit App-ID firewall throughput. It supports sixty-four-million sessions, thirty-gigabit threat prevention and twenty-four-gigabit IPsec VPN throughput. PA-5260 has slightly higher firewall throughput but half the session ceiling.

Condition: New Factory Sealed

USG6391E-AC is the lower-capacity model in this Huawei E-series pair. It is listed at ten-gigabit firewall throughput, four-point-five-gigabit NGFW and IPS processing, and five-point-five-gigabit IPsec VPN throughput. USG6395E-AC provides the next performance tier on a similar AC platform.

Condition: New Factory Sealed

USG6390-BDL-AC is the higher-performance redundant-AC bundle. Manufacturer figures are ten-gigabit firewall throughput, four-point-five-gigabit NGFW and IPS processing, and five-point-five-gigabit IPsec VPN throughput. That capacity step separates it from USG6380-BDL-AC.