Enterprise IT Network Hardware Products - Page 26

Condition: Condition confirmed by quotation

AIR-ANT4941 is a Cisco indoor articulated dipole antenna for a 2.4 GHz Aironet radio connection. It uses an RP-TNC plug and an omnidirectional horizontal pattern.

Condition: Condition confirmed by quotation

Cisco AIR-ANT2465P-R is a 2.4 GHz diversity patch antenna with 6.5 dBi peak gain, vertical polarization and RP-TNC connections. It differs from the single-patch AIR-ANT2460P-R.

Condition: Condition confirmed by quotation

AIR-ANT2414S-R is a Cisco outdoor 2.4 GHz sector antenna with 90-degree azimuth coverage. Its specified 14 dBi gain includes the supplied 1.5 m cable.

Condition: Condition confirmed by quotation

Cisco AIR-ANT5195P-R is a 9.5 dBi, vertically polarized 2 × 2 patch array for 5150–5850 MHz. Its attached lead ends in an RP-TNC male connector.

Condition: Condition confirmed by quotation

AIR-ANT5114P-N is Cisco's directional 2 × 2 patch-array antenna with a female N connector. Gain is 13 dBi from 4900–5470 MHz and 14 dBi from 5470–5850 MHz.

Condition: Condition confirmed by quotation

Cisco AIR-ANT2506 is a 5.2 dBi omnidirectional mast-mount antenna for 2.4 GHz WLAN radios with an RP-TNC connection. It is suitable for indoor or outdoor installation.

Condition: Condition confirmed by quotation

AIR-ANT2460P-R is a Cisco 6 dBi single-patch antenna covering 2400–2484 MHz. It uses vertical polarization and an RP-TNC connection for compatible 2.4 GHz Aironet radios.

Condition: Condition confirmed by quotation

Cisco AIR-ANT1949 is a vertically polarized 13.5 dBi Yagi antenna for a 2.4 GHz Aironet radio installation. Its directional beam must be aligned with the intended link.

Condition: Condition confirmed by quotation

AIR-ANT5135D-R is Cisco's black 3.5 dBi articulated dipole for 5150–5850 MHz. Its horizontal radiation pattern is omnidirectional; this is not an outdoor directional panel.

Condition: Condition confirmed by quotation

Cisco AIR-ANT2524DW-RS is a white indoor dual-band antenna with self-identification circuitry, 2 dBi gain at 2.4 GHz and 4 dBi at 5 GHz. It is an antenna accessory, not an access point.

Condition: Condition confirmed by quotation

Contacta STS-K001L is a window intercom system with a customer bridge-bar microphone/speaker, a staff unit, open-duplex amplification and a counter hearing loop.

Condition: Condition confirmed by quotation

Contacta IR-NL1 connects to a receiver and couples its audio magnetically to a telecoil-enabled hearing instrument. It is a neck-loop accessory, not a standalone receiver.

Condition: Condition confirmed by quotation

IL-RX20 is a Contacta receiver for listening to an installed hearing loop through headphones. It provides flat response and low-cut settings and uses two AAA batteries.

Condition: Condition confirmed by quotation

Contacta IL-PL20-2 is a movable desktop hearing loop for a conversation between two people where a fixed loop is impractical. It uses constant-current loop drive and audio processing.

Condition: Condition confirmed by quotation

R9861600D01C identifies a Barco generation 4 USB-C ClickShare Button. It belongs to the C/CX compatibility group, not the generation 3 USB-A replacement group.

Condition: Condition confirmed by quotation

Barco R9861500D01 is a generation 3 USB-A ClickShare Button for CS-100 and CSE-series presentation systems. Check the Base Unit model before ordering a replacement.

Condition: Condition confirmed by quotation

This CX-50 listing describes the Barco ClickShare CX-50 second-generation ZH bundle with two Buttons. Barco identifies the ZH two-Button article as R9861622ZHB2. Confirm that exact regional article on the quotation.

Condition: Condition confirmed by quotation

Barco R9861500D01C is a generation 3 ClickShare USB-C Button for CS-100 and CSE-series Base Units. Barco marks this spare part end of life; confirm the installed Base Unit and replacement requirement before ordering.

Condition: New Factory Sealed

PAN-CG-ION-1000 identifies Palo Alto Networks Prisma SD-WAN ION 1000 branch hardware, not a standalone security subscription. The fanless appliance provides four 10/100/1000 RJ45 WAN/LAN/Internet ports, one RJ45 console port and a 36W external power adapter.

Condition: New Factory Sealed

H3C EWP-WA4320-ACN-C-FIT is the Fit-mode order code for the WA4320-ACN-C dual-radio IEEE 802.11a/b/g/n/ac wireless access point.