Ruckus R320 901-R320-WW02 - Ruckus Indoor AP

901-R320-WW02 Wave 2 Indoor AP

901-R320-WW02 identifies the standard-managed, worldwide-region R320 hardware. It is a concurrent dual-band 802.11ac Wave 2 indoor access point with 2x2:2 radio chains, one Ethernet uplink and PoE input; the exact order does not include a power adapter or PoE injector.

Wave 2 is a real model boundary

The R320 adds the Wave 2 generation boundary that must not be copied onto 901-R310-WW02. Preserve the full R320 model in the RF plan, controller inventory and purchase record so a visually similar R310 is not accepted as the same radio generation.

WW is the ordering region

The WW suffix must match the destination and current regulatory approval. Confirm country code, allowed channels, channel width and transmit-power limits in the selected management release before enabling service. A worldwide ordering code does not authorize every channel in every country.

Power and mounting are separate checks

Verify the switch port can supply the required PoE mode and record negotiated power after boot. Because the adapter and injector are not included, list any required power accessory separately. Reconcile the actual mounting bracket with the ceiling or wall design rather than assuming it is in the AP carton.

Deployment acceptance

Retain the full PID, serial, controller or cloud assignment, firmware, country, one Ethernet link, PoE negotiation, both bands, SSID/VLAN delivery, authentication, roaming and measured RF result. The category must identify R320, not the unrelated R720 family.

Official sources: RUCKUS R320 product data sheet and RUCKUS exact AP ordering reference.