S5700-28P-LI-4AH is a HUAWEI enterprise network switch listed by YYST Global for campus switching, data center expansion, spare replacement and network refresh projects. This page is intended for buyers comparing replacement parts, project supply, spare inventory and quote options.
YYST Global helps enterprise customers confirm model information, product category, condition, availability and sourcing route before purchase. For time-sensitive projects, send the model number and required quantity so our sales team can check stock, lead time and compatible alternatives.
Product name: S5700-28P-LI-4AH Huawei S5700 Series Switch. Category: Huawei Switches. Condition: New Factory Sealed.
S5700-28P-LI-4AH Specification | |
Fixed port | 24 × 10/100/1000Base-T, 4 × 1000Base-X SFP |
MAC address table | IEEE 802.1d compliance |
MAC address learning and aging | |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
MAC address entries: 16K | |
VLAN | 4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping |
Ring protection | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
SEP | |
ERPS(G.8032) | |
STP, RSTP, and MSTP | |
BPDU protection, root protection, and loop protection | |
BPDU Tunnel | |
Reliability | Ethernet OAM (IEEE 802.3ah and 802.1ag) |
ITU-Y.1731 | |
DLDP | |
LACP | |
MPLS features | MPLS L3VPN |
MPLS L2VPN(VPWS/VPLS) | |
MPLS-TE | |
MPLS QoS | |
IP routing | Static routing |
IPv6 features | Neighbor Discovery (ND) |
Path MTU (PMTU) | |
IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type | |
MLD v1/v2 snooping | |
Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave |
Multicast forwarding in a VLAN and multicast replication between VLANs | |
Multicast load balancing among member ports of a trunk | |
Controllable multicast | |
Port-based multicast traffic statistics | |
QoS/ACL | Rate limiting on packets sent and received by an interface |
Packet redirection | |
Port-based traffic policing and two-rate three-color CAR | |
Eight queues on each port | |
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms | |
Re-marking of the 802.1p priority and DSCP priority | |
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID | |
Rate limiting in each queue and traffic shaping on ports | |
Security | User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface, and VLAN | |
Port isolation, port security, and sticky MAC | |
MFF | |
Blackhole MAC address entries | |
Limit on the number of learned MAC addresses | |
802.1x authentication and limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC | |
SSH v2.0 | |
Hypertext Transfer Protocol Secure (HTTPS) | |
CPU defense | |
Blacklist and whitelist | |
Access Security | DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security |
Management and maintenance | Virtual cable test |
Port mirroring and RSPAN (remote port mirroring) | |
Remote configuration and maintenance using Telnet | |
SNMP v1/v2c/v3 | |
RMON | |
Web NMS | |
HGMP | |
System logs and alarms of different levels | |
802.3az EEE | |
Dying gasp | |
sFlow | |
Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) | |
Supports VCMP (Similar to VTP) | |
Operating environment | Operating temperature: 0℃–50℃ |
Relative humidity: 10%–90% (non-condensing) | |
Input voltage | AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 47/63 Hz |
DC: Rated voltage range: –48 V to –60 V, DC Maximum voltage range: –36 V to –72 V DC Note: PoE-support switches do not use DC power supplies. | |
Dimensions (W x D x H) | 442 x 310 x 43.6 mm |
Powerconsumption | <23W |
| Exact product model | S5700-28P-LI-4AH |
| Product family | Huawei campus switch |
| Official Huawei documentation | Huawei Enterprise Support results for S5700-28P-LI-4AH |
Product Quotation | ![]() | Condition and Packaging | |
Return Eligibility | Returns and Replacement | ||
Shipping Arrangements | ![]() | Warranty Terms |
S5700-28P-LI-4AH Huawei S5700 Series Switch is a HUAWEI Switches product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
For S5700-28P-LI-4AH, the manufacturer specification lists fixed port as 24 × 10/100/1000Base-T, 4 × 1000Base-X SFP.
For S5700-28P-LI-4AH, the manufacturer specification lists input voltage as AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 47/63 Hz.
For S5700-28P-LI-4AH, the manufacturer specification lists dimensions (w x d x h) as 442 x 310 x 43.6 mm.
Contact YYST Global to confirm availability for S5700-28P-LI-4AH, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
Related products

Huawei S5700-28P-LI-24S-BAT is a Gigabit optical switch with built-in AC and a backup battery or power-module slot. Confirm the installed battery: runtime depends on capacity, charge, load and age.

Huawei S5700-28P-PWR-LI-AC offers 24 PoE+ copper ports and four Gigabit optical uplinks. Its standalone PoE budget is 369.6 W; expanded RPS power and stacking-port availability depend on software version.

Huawei S5700-28X-LI-24S-AC has 20 optical access ports, four combo interfaces and four 10GE SFP+ uplinks. It uses a built-in AC supply, supports external RPS1800 backup and provides no PoE.

Huawei S5700-28TP-PWR-LI-AC, BOM 98010537, has 24 Gigabit PoE+ Ethernet ports, two dedicated GE SFP connections and two dual-purpose Gigabit copper/SFP connections. The official ordering description specifies AC 110/220 V.

S5700-28C-EI-AC is listed against the S5700-28C-EI copper-access platform. Huawei documents 24 gigabit copper ports and optional uplink subcards for that base model; confirm the exact AC order configuration and installed modules before purchase.

S5700-26X-SI-12S-AC is a Huawei AC-powered switch with 12 copper 10/100/1000BASE-T ports, 12 optical 100/1000Base-X ports and two 10GE SFP+ uplinks. Huawei explicitly excludes this model from the S5700-SI iStack feature.

Huawei S5700S-28X-LI-AC has 24 copper Gigabit ports and four GE/10GE SFP+ uplinks, with no PoE. Check optical reach, stacking allocation and the GPON port-exclusion rule before choosing uplink modules.

Huawei S5700S-28P-PWR-LI-AC provides 24 Gigabit PoE+ ports. Its standalone PoE budget is 369.6 W; the documented 800 W budget requires external RPS configuration. Uplink and stacking ports are shared.