



CE6865E-48S8CQ is a HUAWEI enterprise network switch listed by YYST Global for campus switching, data center expansion, spare replacement and network refresh projects. This page is intended for buyers comparing replacement parts, project supply, spare inventory and quote options.
YYST Global helps enterprise customers confirm model information, product category, condition, availability and sourcing route before purchase. For time-sensitive projects, send the model number and required quantity so our sales team can check stock, lead time and compatible alternatives.
Product name: Huawei CE6865E-48S8CQ Switch. Category: Huawei CE6800 Series Switches. Condition: New Factory Sealed.
Table 4-132 Technical specifications of the CE6865E-48S8CQ
| Item | Specification |
|---|---|
| Dimensions with packaging (H x W x D) [mm (in.)] | 175 mm x 650 mm x 550 mm (6.89 in. x 25.59 in. x 21.65 in.) |
| Dimensions without packaging (H x W x D) [mm (in.)] |
|
| Weight without packaging [kg (lb)] | 6.2 kg (13.67 lb), excluding optical modules, power modules, and fan modules |
| Weight without packaging (full configuration) [kg (lb)] | 8.8 kg (19.40 lb) (including AC power modules and fan modules, excluding optical modules, calculated based on the heaviest model if multiple models are supported) |
| Weight with packaging [kg (lb)] | 9.45 kg (20.83 lb) |
| Weight with packaging (full configuration) [kg (lb)] | 11.75 kg (25.9 lb) |
| Chassis height [U] | 1 U |
| Installation Type | Cabinet Installation |
| Switching capacity | To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel. |
| CPU | 4-core, 1.4 GHz |
| Memory | DRAM: 4 GB |
| NOR Flash | 64 MB |
| NAND Flash | 4 GB |
| USB | Supported |
| Power supply mode |
|
| Console port | RJ45 |
| Downlink Service interface | 48*25GE SFP28 NOTE: 1. A 25GE port works at 25 Gbit/s by default and cannot work at 1 Gbit/s or 10 Gbit/s through auto-sensing, but can be configured to work at 10 Gbit/s or 1 Gbit/s through commands. When a 25GE port is configured to work at 10 Gbit/s or 1 Gbit/s, the rate of the other three ports in the same group also needs to be switched. The rate of a single port cannot be switched independently. 2. 10GE LRM/80 km linear optical modules are not supported. 3. The 1000BASE-X auto-negotiation function is not supported. To connect the two interfaces at both ends of a link, disable the auto-negotiation function of the peer interface. After the connection, in some port failure scenarios, the interface on one end may be Up and the interface on the other end may be Down. 4. GE copper modules cannot be installed in ports directly above or below another GE copper module. |
| Uplink Service interface | 8*100GE QSFP28 (Note: Each 100G QSFP28 port can be configured to work at 40 Gbit/s, and can be split into four 10GE or 25GE ports. After split, they cannot be used as GE ports.) |
| Service port supporting the stack function | 25GE optical ports, and 100GE optical ports |
| RTC | Supported |
| Typical power consumption [W] |
|
| Typical heat dissipation [BTU/hour] | 610 BTU/hour (100% traffic load, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules) 791 BTU/hour (100% traffic load, short-distance optical modules on all ports, dual power modules) |
| Static power consumption [W] | 133 W |
| Static heat dissipation [BTU/hour] | 453 BTU/hour |
| Maximum power consumption [W] | 378 W |
| Maximum heat dissipation [BTU/hour] | 1290 BTU/hour |
| Number of power modules | 2 |
| Redundant power supply | 1+1 backup |
| Rated input voltage [V] |
|
| Input voltage range [V] |
|
| Maximum input current [A] |
|
| Rated output power [W] |
|
| Certification |
|
| Power supply surge protection [kV] | AC: 6 kV in common mode and 6 kV in differential mode DC: 4 kV in common mode and 2 kV in differential mode HVDC: 4 kV in common mode and 2 kV in differential mode |
| Types of fans | Pluggable |
| Number of fan modules | 4 |
| Redundant fans | The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short period of time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
| Heat dissipation mode | Air cooling |
| Airflow direction | Front-to-back or back-to-front airflow, depending on the selected fan modules and power modules |
| MTBF [year] | 36.9 years |
| Noise at normal temperature (27°C, sound pressure) [dB(A)] | Front-to-back airflow: 49.8 dB(A) on average (maximum: 53.6 dB(A)) Back-to-front airflow: 47.8 dB(A) on average (maximum: 51.2 dB(A)) |
| Noise at high temperature (40°C, sound pressure) [dB(A)] | Front-to-back airflow: 67.6 dB(A) on average (maximum: 73.4 dB(A)) Back-to-front airflow: 68 dB(A) on average (maximum: 75.4 dB(A)) |
| Long-term operating altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating temperature [°C (°F)] | 0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.) NOTE: When the altitude is 1800–5000 m (5096–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Storage altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
| Storage relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Storage temperature [°C (°F)] | -40°C to +70°C (-40°F to +158°F) |
| Exact product model | CE6865E-48S8CQ |
| Product family | Huawei CloudEngine data center switch |
| Official Huawei documentation | Huawei Enterprise Support results for CE6865E-48S8CQ |
Product Quotation | ![]() | Condition and Packaging | |
Return Eligibility | Returns and Replacement | ||
Shipping Arrangements | ![]() | Warranty Terms |
Huawei CE6865E-48S8CQ Switch is a HUAWEI CE6800 Series Switches product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
For CE6865E-48S8CQ, the manufacturer specification lists dimensions with packaging (h x w x d) [mm (in.)] as 175 mm x 650 mm x 550 mm (6.89 in. x 25.59 in. x 21.65 in.).
Contact YYST Global to confirm availability for CE6865E-48S8CQ, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
The current reference price for CE6865E-48S8CQ is US$ 378.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products

CE6865-48S8CQ-EI is the eight-uplink CQ order in this comparison set. Huawei documents a 442.0 x 420.0 x 43.6 mm chassis, 8.8 kg configured basis and V200R005C00 software baseline.

CE6860-SAN is a 1U CloudEngine storage-network switch with 48 SFP28 and eight QSFP28 ports. Base parts 02354FPM and 02354FPM-001 exclude power supplies and fans.

CE6860-HAM is a 1U CloudEngine data center switch with 48 SFP28 and eight QSFP28 ports. Base part 02354WBA excludes power supplies and fan modules.

Huawei CE6863H-48S6CQ-K is an exact CE6800 data center switch model with an official V300R025C10 product record.

Huawei CE6810-48S-LI has 48 optical 10GE interfaces and no QSFP+ uplink ports. Its base order does not include fans or power modules.

Huawei CE6850-48S4Q-EI combines optical 10GE access with four 40GE uplinks. Fans and power modules are separate from the base order.

Huawei CE6850-48S6Q-HI is an optical data center switch with six 40GE uplinks. The base chassis order excludes fans and power modules.

Huawei CE6870-48S6CQ-EI-A provides 48 SFP+ 10GE ports and six QSFP28 100GE ports. The base ordering code excludes fans and power modules; it is distinct from the -F and -B configured orders.