




Huawei 02353VWR CE6857E-48T6CQ switch is listed by YYST Global for buyers looking for HUAWEI CE6800 Series Switches. Huawei CE6857E-48T6CQ is a 1U CloudEngine switch with 48 x 10GE RJ45 downlinks and 6 x 100GE QSFP28 uplinks. The listed condition is New Factory Sealed. The reference price is US$ 375.00. Contact our sales team to confirm stock, lead time, warranty and configuration before ordering.
CE6857E-48T6CQ is defined by forty-eight 10GE RJ45 service interfaces and six 100GE QSFP28 uplinks. The copper ports are compatible with Gigabit Ethernet but Huawei states that they do not support 100M or 10M operation. This makes the model unsuitable as a direct replacement where legacy 10/100 copper endpoints must remain.
Each QSFP28 uplink can operate at 40GE. Huawei documents that port breakout availability depends on the software release: in V2R21C00 and later, only uplink ports 3 and 4 can split into four 25GE or four 10GE interfaces. A migration plan must therefore include the installed VRP release and the exact breakout requirement.
The 1U chassis uses two power-module slots and four pluggable fan modules. Power and fan modules must share the same front-to-back or back-to-front airflow direction. Confirm the complete bill of materials because optics, breakout cables, power modules and fan modules are configuration items.
| Exact model / SKU | CE6857E-48T6CQ |
| Downlink interfaces | 48 x 10GE RJ45; GE compatible, not 10M/100M |
| Uplink interfaces | 6 x 100GE QSFP28; 40GE mode supported |
| Breakout dependency | Ports 3 and 4 support 4 x 25GE / 4 x 10GE from V2R21C00 |
| Chassis | 1U, two power slots and four fan slots |
| Airflow | Front-to-back or back-to-front with matching power and fan modules |
| Source match | Exact-model Huawei CE6857E-48T6CQ hardware description |
| Official manufacturer reference | Huawei CE6857E-48T6CQ hardware description |
The cooling system of the CloudEngine 6800 series switches uses front-to-back or back-to-front airflow depending on the airflow direction of the power modules and fan modules used.
Figure 4-57 Front-to-back airflow for port-side exhaust
Figure 4-58 Back-to-front airflow for port-side intake
The airflow direction of the power modules and fan modules required on the CloudEngine 6800 series switches depends on how the device is installed in a cabinet. Typically, cabinets in a data center have cold air flowing in from the front and hot air exhausted from the back. If a switch is installed with the power supply side facing the front and the port side facing the back, the switch needs to adopt fan modules and power modules with front-to-back airflow.
Power modules and fan modules using forced air cooling on a switch must have the same airflow direction. If a switch adopts power modules with back-to-front airflow, the switch must use fan modules with back-to-front airflow as well.
Table 4-57 Technical specifications of the CE6857E-48T6CQ
| Item | Specification |
|---|---|
| Dimensions with packaging (H x W x D) [mm (in.)] | 175 mm x 650 mm x 550 mm (6.89 in. x 25.59 in. x 21.65 in.) |
| Dimensions without packaging (H x W x D) [mm (in.)] |
|
| Weight without packaging [kg (lb)] | 5.75 kg (12.7 lb) (excluding optical modules, power modules, and fan modules) |
| Weight without packaging (full configuration) [kg (lb)] | 8.05 kg (17.7 lb) (including AC power modules and fan modules, excluding optical modules, calculated based on the heaviest model if multiple models are supported) |
| Weight with packaging [kg (lb)] | 9.15 kg (20.2 lb) |
| Weight with packaging (full configuration) [kg (lb)] | 11.4 kg (25.1 lb) |
| Chassis height [U] | 1 U |
| Installation Type | Cabinet Installation |
| Switching capacity | To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel. |
| CPU | 4-core, 1.6 GHz |
| Memory | DRAM: 4 GB |
| NOR Flash | 128 MB |
| SSD Flash | 8 GB |
| USB | Supported |
| Power supply mode |
|
| Console port | RJ45 |
| Downlink Service interface | 48*10GE RJ45 (10GE interfaces are compatible with GE but do not support 100M/10M electrical interfaces. They only support full-duplex, not half-duplex.) |
| Uplink Service interface | 6*100GE QSFP28 NOTE: 1. Each 100G QSFP28 port can be configured to work at 40 Gbit/s. 2. In V2R20C10, 40G/100G uplink ports cannot be split. In V2R21C00 and later versions, 40G/100G uplink ports 3 and 4 can be split into 4x25G and 4x10G ports, and the other 40G/100G uplink ports cannot be split. |
| Service port supporting the stack function | 10GE electrical ports and 100GE optical ports |
| RTC | Supported |
| Typical power consumption [W] |
|
| Typical heat dissipation [BTU/hour] |
|
| Static power consumption [W] | 136 W |
| Static heat dissipation [BTU/hour] | 464 BTU/hour |
| Maximum power consumption [W] | 363 W |
| Maximum heat dissipation [BTU/hour] | 1239 BTU/hour |
| Number of power modules | 2 |
| Redundant power supply | 1+1 backup |
| Rated input voltage [V] |
|
| Input voltage range [V] |
|
| Maximum input current [A] |
|
| Rated output power [W] |
|
| Certification |
|
| Power supply surge protection [kV] |
|
| Types of fans | Pluggable |
| Number of fans | 4 |
| Redundant fans | The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short period of time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
| Heat dissipation mode | Air cooling |
| Airflow direction | Front-to-back or back-to-front airflow, depending on the selected fan modules and power modules |
| MTBF [year] | 46.59 years |
| MTTR [hour] | 1.56 hours |
| Noise at normal temperature (27°C, sound pressure) [dB(A)] |
|
| Noise at high temperature (40°C, sound pressure) [dB(A)] |
|
| Long-term operating altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, noncondensing |
| Long-term operating temperature [°C (°F)] | 0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE: When the altitude is between 1800 m and 5000 m (5906 ft. and 16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Storage altitude [m (ft.)] | < 5000 m (16404 ft.) |
| Storage relative humidity [RH] | 5% to 95% RH, non-condensing |
| Storage temperature [°C (°F)] | -40°C to +70°C (-40°F to +158°F) |
| Exact product model | CE6857E-48T6CQ |
| Product family | Huawei CloudEngine data center switch |
| Official Huawei documentation | Huawei Enterprise Support results for CE6857E-48T6CQ |
Low Price Guarantee | ![]() | Quality Assurance | |
100% Money Back Guarantee | Commodity Refund Guarantee | ||
Diversified and Flexible Transportation Services | ![]() | Standard Policy |
Huawei 02353VWR CE6857E-48T6CQ switch is a HUAWEI CE6800 Series Switches product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
For CE6857E-48T6CQ, the manufacturer specification lists downlink interfaces as 48 x 10GE RJ45; GE compatible, not 10M/100M.
For CE6857E-48T6CQ, the manufacturer specification lists dimensions with packaging (h x w x d) [mm (in.)] as 175 mm x 650 mm x 550 mm (6.89 in. x 25.59 in. x 21.65 in.).
CE6857E-48T6CQ is in stock at YYST Global. Contact the sales team to confirm the required quantity, exact configuration, delivery destination and current lead time before ordering.
The current reference price for CE6857E-48T6CQ is US$ 375.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products

CE6857E-48S6CQ is listed in Huawei CE6800 Series Switches. Check model compatibility, current stock, condition and quotation details.

CE6855-48T6Q-HI is a Huawei CloudEngine CE6800 data center switch. Huawei ended new sales on December 31, 2019 and identifies CE6856-48T6Q-HI as the replacement, so procurement should focus on exact spare compatibility, software level, airflow and power configuration.

CE6855-48XS8CQ is a 1U Huawei CloudEngine data center switch with 48 x 10GE SFP+ service ports and 8 x 100GE QSFP28 uplink ports. Base part number 02355KTJ excludes power supplies and fan modules, so airflow and power options must be specified separately.

CE6851-48S6Q-HI is listed in Huawei CE6800 Series Switches. Check model compatibility, current stock, condition and quotation details.

CE6850U-48S6Q-HI is listed in Huawei CE6800 Series Switches. Check model compatibility, current stock, condition and quotation details.

CE6850-48S6Q-HI is listed in Huawei CE6800 Series Switches. Check model compatibility, current stock, condition and quotation details.

CE6850U-24S2Q-HI is listed in Huawei CE6800 Series Switches. Check model compatibility, current stock, condition and quotation details.

CE6850-48S4Q-EI is listed in Huawei CE6800 Series Switches. Check model compatibility, current stock, condition and quotation details.