Huawei AP2050DN 802.11ac Wall-Plate Access Point 50082925
- 763 412 7282
- +86 010 69614620
AP2050DN Overview
The AP2050DN order and room connection plan
Huawei's ordering table identifies AP2050DN mainframe as part number 50082925 with an 802.11ac, 2x2 dual-frequency radio description and built-in antenna. It is a physical wall-plate WLAN access point, not an AirEngine 5700 Wi-Fi 6 product or a software license. Retain the unsuffixed AP2050DN identity and manufacturer part number when comparing the enquiry with the offered hardware.
Separate the uplink from the room-side ports
The official interface table assigns GE0/PoE_IN to the Ethernet uplink and PoE input. GE2 through GE4 provide 10/100/1000 Ethernet connections. For AP2050DN, GE1 is also a data Ethernet port; the separate GE1/PoE_OUT description belongs to AP2050DN-E. Do not copy the E model's PoE output function into the unsuffixed order. Plan the switch connection and room devices using these actual port roles.
Understand the pass-through and storage connections
Huawei describes a separate RJ45 Pass Through connection for transparent transmission through a network or phone cable. Treat that path separately from the AP's switched Ethernet connections and confirm the cabling plan for the room. The USB port supports USB2.0 storage expansion. A pass-through connection or a USB storage interface is not evidence of extra radio capacity or a PoE output budget.
Size the power arrangement with its exclusions
The AP2050DN basic table lists 48V DC input with a tolerance of plus or minus 5%, or IEEE 802.3af/at PoE supply. Its 11.5W maximum consumption reference excludes USB-port output power; Huawei also says the actual maximum is subject to local laws and regulations. Check the intended power source and USB use when planning the installation. The hardware guide states that the power adapter is purchased separately, so do not assume it is included in the mainframe quotation.
Check the wall box and physical clearance
The product overview describes installation in standard 86-type boxes. The separate basic specification table gives overall dimensions of 36mm high by 86mm wide by 140mm deep and a weight of 0.26kg; keep the overall device measurements separate from the wall-box description. Verify the mounting arrangement, cable space and room layout against the official drawing and the supplied unit before installation.
Series reference and exact procurement identity
The displayed image is Huawei's shared AP2050DN/AP2050DN-E interface illustration, marked as a Series reference. Its common drawing does not transfer the E model's PoE_OUT function to AP2050DN or establish a photograph of the offered unit. Similar AP2050DN-S or E names are not substitute ordering evidence. Do not infer functionality from the S suffix alone; verify its exact manufacturer ordering line. Confirm the exact part, intended software and management mode, supplied accessories, condition, support eligibility, quantity and delivery terms in the quotation.
Document/Firmware Download
Huawei AP2050DN ordering information: part 50082925, AP2050DN and AP2050DN-E interface roles, Exact basic specifications and power exclusions and Huawei wall-plate product overview supply the facts on this page. Use documentation for the exact software release when selecting the operating mode.
AP2050DN Specification
| Ordering identity | Huawei AP2050DN mainframe; manufacturer part number 50082925 |
| Radio order description | 802.11ac, 2x2 dual-frequency, built-in antenna; not an AirEngine 5700 Wi-Fi 6 order |
| Uplink and input | GE0/PoE_IN: 10/100/1000 Ethernet with PoE input |
| Room Ethernet interfaces | GE1 and GE2 to GE4: 10/100/1000 Ethernet; GE1/PoE_OUT is documented separately for AP2050DN-E |
| Pass-through connection | Separate RJ45 network or phone cable path for transparent transmission |
| Storage interface | USB2.0 port for USB flash drive or other storage expansion |
| Power input | 48V DC +/-5% or IEEE 802.3af/at PoE supply; power adapter purchased separately |
| Documented consumption | AP2050DN maximum reference 11.5W excluding USB output; subject to local laws and regulations |
| Dimensions and weight | 36mm H x 86mm W x 140mm D; 0.26kg |
| Memory and flash | 256MB DDR3L system memory; 64MB NOR flash |
| Reference image scope | Series AP2050DN/AP2050DN-E interface illustration; not an offered-unit photo or proof of E-model functions on AP2050DN |
AP2050DN Warranty
 | Product Quotation |  | Condition and Packaging |
 | Return Eligibility |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
AP2050DN FAQ
What is AP2050DN?
Huawei AP2050DN 802.11ac Wall-Plate Access Point 50082925 is a HUAWEI Wireless product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What radio order description is listed for AP2050DN?
For AP2050DN, the manufacturer specification lists radio order description as 802.11ac, 2x2 dual-frequency, built-in antenna; not an AirEngine 5700 Wi-Fi 6 order.
What interfaces and ports does AP2050DN provide?
For AP2050DN, the manufacturer specification lists room ethernet interfaces as GE1 and GE2 to GE4: 10/100/1000 Ethernet; GE1/PoE_OUT is documented separately for AP2050DN-E.
What are the power requirements for AP2050DN?
For AP2050DN, the manufacturer specification lists power input as 48V DC +/-5% or IEEE 802.3af/at PoE supply; power adapter purchased separately.
Is AP2050DN available from YYST Global?
Contact YYST Global to confirm availability for AP2050DN, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
Related products
Related AP2050DN
Huawei AP2050DN-S Wall-Plate Access Point
Huawei AP2050DN-S is an indoor wall-plate access point with an IEEE 802.11ac Wave 2 wireless module. The exact manufacturer ordering line lists mainframe part number 50083061 with dual-frequency 2×2 radio and a built-in antenna. GE0/PoE_IN supplies the Gigabit Ethernet uplink and PoE input, while GE1–GE4 are Gigabit data ports. The AP also provides USB2.0 storage and an RJ45 network/phone cable pass-through. Power choices are 48 V ±5% DC or IEEE 802.3af/at PoE; the 11.5 W reference excludes USB output power. Huawei states that the power adapter is purchased separately. The image shown is the original manufacturer interface illustration.
AP2050DN-E Huawei AP2000 Series 802.11ac 2x2 MU-MIMO Access Point
AP2050DN-E HUAWEI wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.
Huawei AP9330DN-DC Access Point Bundle
Huawei AP9330DN-DC is the AP9330DN distributed access-point bundle mapped to manufacturer part 02350CFD. Its exact order description includes an AC/DC adapter, indoor dual-frequency 802.11ac hardware and twelve external antenna ports. Huawei separately identifies the adapter-free AP9330DN mainframe as 02350CFC. The AP hardware uses RP-SMA-K connections and supports 12 V ±10% DC or IEEE 802.3at input; its named-model consumption reference is 19 W. Confirm the supplied adapter, destination plug, room antennas and feeder plan. The image illustrates the AP9330DN hardware and does not show or establish the complete offered bundle contents.
Huawei AP9330DN Distributed Access Point
Huawei AP9330DN is an indoor dual-band 802.11ac distributed access point with 12 external antenna connections. Huawei describes coverage for six rooms with two streams per room, subject to the planned antenna and feeder installation. Its antenna ports use RP-SMA-K connectors. The named-model specification lists 12 V ±10% DC or IEEE 802.3at PoE, a 19 W maximum-consumption reference, 53 × 220 × 220 mm dimensions and 1.3 kg weight. Order reference 02350CFC excludes an AC/DC adapter; 02350CFD is the adapter bundle. Confirm the offered order code and accessories in the quote. The image is original manufacturer interface artwork, not a supplied-unit photograph.
Huawei AC650-64AP WLAN Access Controller
AC650-64AP is a Huawei WLAN controller, part 02354JKA, with 10 GE ports, 2 SFP+ uplinks and a power adapter. Confirm AP rights and request a quote.
Huawei AP2030DN Wall-Plate Access Point
Huawei AP2030DN is an enterprise wall-plate access point with a manufacturer ordering reference of 50082640. That exact row specifies five RJ45 connections, two RJ11 connections and an 802.11ac dual-frequency design. The interface table separates a Gigabit GE/PoE uplink from four 10/100M ETH0–ETH3 room ports and identifies telephone interfaces for PSTN and for a POTS phone or modem. Power options are 12 V ±10% DC and IEEE 802.3af/at PoE, with an 8.7 W consumption reference. The illustrated top, bottom and side views are original manufacturer interface artwork. AP2030DN-S is a different order reference and has a simpler wired layout.
Huawei AP2030DN-S Wall-Plate Access Point
Huawei AP2030DN-S is an indoor 86-type wall-plate access point. Its exact manufacturer mainframe ordering line is part number 50083605, described as 802.11ac, dual-band 2×2 with a built-in antenna. The hardware guide documents one 10/100M ETH/PoE connection to the central AP, IEEE 802.3af input and a 5.1 W consumption reference. Cabling must be Cat5e or better and no longer than 100 m. The reference enclosure is 26 × 86 × 120 mm and 0.1 kg. The displayed image is a shared manufacturer wall-plate interface illustration supplied in the AP2030DN-S chapter, not a photograph of the offered unit.
Huawei R450D Remote Unit
Huawei R450D is an indoor remote unit (RU) for Huawei agile distributed Wi-Fi, connected to and managed by a central AP. Its wireless module supports IEEE 802.11a/b/g/n/ac/ac Wave 2 on 2.4 GHz and 5 GHz. A GE/PoE_IN 10/100/1000M connection carries the wired uplink and PoE input; a separate console supports maintenance. Huawei lists DC 12 V or IEEE 802.3af/at input, 12.1 W maximum consumption, a 35 × 170 × 170 mm housing and 0.41 kg reference weight. Confirm the central AP, software and power arrangement when requesting a quote.