IE-2000U-8TC-G - Cisco Industrial Ethernet 2000 Series Switch
- 763 412 7282
- +86 010 69614620
IE-2000U-8TC-G Overview
Eight copper access links with a choice of uplink media
IE-2000U-8TC-G is a Cisco utility-focused Ethernet switch with eight 10/100BASE-T ports and two Gigabit Ethernet dual-purpose ports. Each uplink can use copper or an SFP module; these are alternatives on one logical interface, not four independent uplinks.
Replacing an installed 8TC switch
Start with the connected devices and uplink media. Keep the eight Fast Ethernet access connections separate from the Gigabit uplinks in the port schedule. Check the existing software configuration and approved transceiver references before changing the medium.
Space and installation facts
The datasheet gives dimensions of 130 × 91.4 × 134 mm including the DIN rail. The hardware guide describes a fanless design and lists this model with LAN Base and IEEE 1588 support. The narrower ten-port chassis should be checked against actual cabinet clearances rather than the dimensions of a sixteen-access-port variant.
Procurement and acceptance
- Match the full model label and the two selected uplink connections to the order.
- Confirm the power source, mounting arrangement and required accessories separately.
- After installation, verify configured port speeds, uplink operation and the site's timing requirements using its approved acceptance procedure.
Cisco includes this model in its end-of-sale notice. Review the published milestones when choosing between a like-for-like spare and migration; do not assume a listed replacement is interchangeable without a design review.
Cisco 8TC port layout and installation overview · IE 2000U datasheet · End-of-sale and migration guidance
IE-2000U-8TC-G Specification
| Datasheet series | Cisco Industrial Ethernet 2000 Series Switches |
| Exact model | IE-2000U-8TC-G |
| Official datasheet | Cisco Industrial Ethernet 2000 Series official product page |
IE-2000U-8TC-G Specification | |
Total Ports | 10 |
RJ45 Ports | 8 FE |
Combo Ports | 2 GE |
IEEE 1588 | Yes |
PRP | Yes |
Software | LAN Base |
Dimensions (H x W x D), Including DIN Rail | 5.1 x 3.6 x 5.26 in (130 x 91.4 x 134 mm) |
Weight | 3.45 lbs (1.56 kg) |
Hardware | ● 256 MB DRAM with ECC memory ● 1 GB removable SD flash memory card (CG swap drive) – (128MB space available) ● Mini-USB connector |
Alarm | ● Alarm I/O: two alarm inputs to detect dry contact open or closed, one alarm output relay. 48 VDC, 0.5A max |
Power Supply | ● Redundant DC input voltage with operating range: 12-48 VDC Nominal, 9.6-60 VDC Maximum ● Maximum DC input current: 0.5A at 48 VDC, 1A at 24 VDC |
Power Consumption | 10-port models: 11-16 W |
Substation Compliance | ● IEC 61850-3 ● IEEE1613 |
Hazardous Location | ● ANSI/ISA 12.12.01 (Class 1, Div 2 A-D) (requires cabinet enclosure) ● UL/CSA 60079-0, -15 (Class 1, Zone 2, group II gases, requires cabinet enclosure) ● EN 60079-0, -15 ATEX certification (Class I, Zone 2, Group II gases, requires cabinet enclosure) ● IEC 60079-0, -15 (Class I Zone 2, Group II gases, requires cabinet enclosure) ● CSA 213 |
Industrial Control Safety | ● UL508 ● CSA C22.2 No. 142 |
EMC Interface Immunity | ● EN 55024 (CISPR 24) ● AS/NZS CISPR 24 ● KN 24 ● IEC61000-4-2 (Criteria A - Class 2) ● IEC61000-4-3/ENV50204 (Criteria A) ● IEC61000-4-4 (Criteria A/Criteria B) ● IEC61000-4-5 (Criteria B) ● IEC61000-4-6 (Criteria A) |
Standard Electromagnetic Emissions Certifications | ● FCC Part 15 Class A ● EN 55022 Class A (CISPR22 Class A) ● ICES-003 Class A ● EN 300 386 ● VCCI Class A ● AS/NZS CISPR22 Class A ● CNS 13438 Class A ● KN 22 Class A CE Marking |
Standard Safety Certifications | ● UL 60950-1 ● CSA 60950-1 ● EN 60950-1 ● IEC 60950-1, CB report and certificate with all national differences |
Operating Environment | ● Operating Temperature: -40C to +75C ● -40C to +70C (Vented Enclosure – 40 LFM Air Flow) ● -40C to +60C (Sealed Enclosure – 0 LFM Air Flow) ● -34C to +75C (Fan or Blower equipped Enclosure – 200 LFM Air Flow) ● -40 to +85C (IEC 60068-2-2 Environmental Type testing - 100 hours) ● Operating altitude: -60 m (-200 ft) to 3,000 m (10,000 ft), de-rate maximum operating temperature per IEEE 1613-2009: ● Relative humidity: 5% to 95% non-condensing |
Storage Environment | ● Temperature: -50º C to +85º C ● Altitude: 15,100 ft (4600 m) |
Warranty | ● Five-year limited warranty on all IE-2000U HW PIDs |
Mean Time Between Failure (MTBF) | ● 700,760 Hours |
Protection Class Code | ● IP30 per EN60529 |
IE-2000U-8TC-G Warranty
 | Product Quotation |  | Condition and Packaging |
 | Technical Support Enquiry |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
IE-2000U-8TC-G FAQ
What is IE-2000U-8TC-G?
IE-2000U-8TC-G - Cisco Industrial Ethernet 2000 Series Switch is a CISCO Industrial Ethernet 2000 Series Switches product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What interfaces and ports does IE-2000U-8TC-G provide?
For IE-2000U-8TC-G, the manufacturer specification lists total ports as 10.
What are the physical specifications of IE-2000U-8TC-G?
For IE-2000U-8TC-G, the manufacturer specification lists dimensions (h x w x d), including din rail as 5.1 x 3.6 x 5.26 in (130 x 91.4 x 134 mm).
Is IE-2000U-8TC-G available from YYST Global?
Contact YYST Global to confirm availability for IE-2000U-8TC-G, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
What is the price of IE-2000U-8TC-G?
The current reference price for IE-2000U-8TC-G is US$ 1,682.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products
Related IE-2000U-8TC-G
IE-2000U-4T-G - Cisco Industrial Ethernet 2000 Series Switch
Cisco IE-2000U-4T-G is a six-port industrial Ethernet switch with two Gigabit Ethernet and four Fast Ethernet copper ports, using LAN Base software. Its all-copper interface arrangement differs from the 4TS and 4S versions.
IE-2000U-16TC-G-X - Cisco Industrial Ethernet 2000 Series Switch
IE-2000U-16TC-G-X Specification Total Ports: 20; RJ45 Ports: 16 FE; Combo Ports: 2 GE + 2 FE.
IE-2000U-4TS-G - Cisco Industrial Ethernet 2000U Series Switch
IE-2000U-4TS-G is a fanless Cisco LAN Base industrial switch with four 10/100BASE-T access ports and two 100/1000Mb/s SFP uplink slots.
IE-2000U-16TC-G - Cisco Industrial Ethernet 2000U Series Switch
IE-2000U-16TC-G is a fanless Cisco industrial switch with 16 Fast Ethernet copper ports, two Gigabit and two Fast Ethernet dual-purpose port pairs, LAN Base with IEEE 1588, and documented PRP support.
IE-2000U-4S-G - Cisco Industrial Ethernet 2000U Series Switch
IE-2000U-4S-G is a fanless Cisco industrial switch with four 100Mb/s SFP slots and two 100/1000Mb/s SFP slots, using a LAN Base image.
IE-2000U-16TC-GP - Cisco Industrial Ethernet 2000 Series Switch
IE-2000U-16TC-GP Specification Total Ports: 18; RJ45 Ports: 16 FE; Combo Ports: 2 GE.
Cisco IE-2000-4TS-G-L Industrial Ethernet Switch 4FE + 2G SFP
IE-2000-4TS-G-L combines four 10/100 copper downlinks, two 100/1000 SFP uplinks and LAN Lite. Confirm optics, installation accessories and support entitlement.
IE-2000-8T67P-G-E - Cisco Industrial Ethernet 2000 Series Switch
IE-2000-8T67P-G-E Specification Total Ports: 10; GE X-code ports: 2; PoE (+): Yes.