AIR-AP3802I-EK910C - Cisco Aironet 3800i Access Point Configurable

AIR-AP3802I-EK910C Order Identity

AIR-AP3802I-EK910C is a Cisco Aironet 3800 Series, controller-based 802.11ac Wave 2 access point order. This exact SKU is a 3802I internal-antenna access point, carries regulatory-domain token E, and uses a configurable 10-unit eco-pack.

Antenna and quantity boundary

Integrated antennas; no external antenna is included or selected as part of this SKU. Confirm the mounting position, ceiling construction and intended coverage because antenna orientation is determined by the integrated-antenna enclosure.

Cisco identifies the K910 order form as an eco-pack containing 10 access points; carton-level receiving must reconcile all ten serial numbers.

The C suffix marks a configurable order form. The final Cisco quotation must preserve the selected regulatory domain and any configuration choices; the suffix does not make the unit globally deployable.

Regulatory-domain control

The order carries regulatory-domain token E. Treat that token as an identifier, not a country name. Complete order-country consistency and local spectrum validation against Cisco's current compliance resources before shipment or activation.

Cisco uses the variable regulatory-domain position in its ordering structure. Deployment eligibility must be checked for the destination country; this page does not infer a country mapping from token E.

Controller readiness

Record the intended Cisco wireless controller, supported software train and join method. Validate the AP on a staging network before changing the production RF plan. The acceptance file should identify the controller address, discovery path, AP authorization method and the release evidence used for approval. Capture the first successful join, configuration download and radio state, then remove any temporary staging authorization. This makes a later controller migration traceable without claiming that every software release supports the hardware.

Power budget

Confirm the switch port's negotiated PoE mode, available power, cable length and LLDP behavior. Keep the measured power result with commissioning evidence. Measure the power state after both radios and production features are active, not only while the unit is idle. Record switch model, port, power class, negotiated result and any feature reduction shown by the controller. If an injector is proposed, verify its Cisco support and place it in the maintained bill of materials.

RF survey

Associate this order with the survey location, channel plan and expected client density. Re-survey after installation if mounting or antenna conditions differ from design. The survey record should show mounting height, obstructions, neighboring radios, channel width and the client mix used for capacity planning. Compare measured post-install coverage with the design and document any power, channel or placement adjustment. This gives the exact order a site-specific purpose beyond a generic product description.

Site acceptance

Commission association, authentication, roaming, uplink negotiation and monitoring at the intended location. Preserve results that can be compared after later changes. The handover record should contain client authentication, DHCP and DNS checks, roaming evidence, controller alarms, switch-port counters and a monitoring owner. Test from representative client types in the intended coverage area. Acceptance is incomplete when the AP merely joins the controller but user and operational paths remain unverified.

Migration dependency

Inventory controller, licensing, switch power, cabling and mounting dependencies that must change when the 3802 is replaced by a newer platform. Map the existing AP to its controller, licenses, authentication services, switch port, power budget, cable, bracket and monitoring objects. The successor plan should state which dependencies can be reused and which require change. This prevents a nominal AP replacement from failing because the surrounding platform was never inventoried.

Change control

Define the staging date, installation window, rollback owner and validation threshold before the AP is joined to a production controller. The change record should list staging evidence, production window, responsible installer, rollback decision and success criteria. Preserve the previous controller or AP state needed for recovery. After the window, close temporary credentials and compare monitoring, authentication and RF results with the approved baseline before declaring completion.

Lifecycle and migration evidence

Cisco's support site lists an end-of-life announcement for the Aironet 3800 Series. Confirm current support dates, controller compatibility and the approved replacement path before treating available stock as suitable for a new deployment.

Related 3802I internal-antenna access point records

• AIR-AP3802I-CK910C
• AIR-AP3802I-DK910C
• AIR-AP3802I-FK910C

Official evidence: Cisco Aironet 3800 Series data sheet, Cisco 3800 Series getting started guide, and Cisco end-of-life notices.