AIR-AP2802I-GK910 Cisco Aironet 2800i WiFi 5 Eco-pack 10 Access Points

AIR-AP2802I-GK910 exact order identity

AIR-AP2802I-GK910 is a Cisco Aironet 2800 Series controller-based 802.11ac Wave 2 access point order. The exact line combines a 2802I indoor access point with integrated antennas, regulatory-domain token G, and a fixed-domain ten-unit eco-pack.

Antenna boundary

Cisco documents twelve cross-polarized internal antennas in the 2802I enclosure. No external antenna is selected by this access-point SKU. The RF result therefore depends on enclosure orientation, mounting height, obstructions and the surveyed placement. Receiving should confirm the mounting kit, while commissioning should retain photographs of the final orientation and compare measured coverage with the approved survey.

Order-form boundary

Cisco's ordering convention uses K910 for a ten-access-point eco-pack. The carton part number does not replace serial-level control, and all ten units must retain the stated regulatory-domain identity. Reconcile ten chassis serials and MAC addresses against the carton and purchase line. Assign every unit to a destination and controller record; a quantity shortage, mixed domain or substituted antenna form is a receiving exception. Because this is a fixed-domain line, a quotation or received label carrying another domain is a different order and requires a fresh approval. The carton is not the deployable asset: each of the ten access points needs its own serial, location, controller and acceptance result.

G regulatory-domain channel evidence

Cisco's 2800 Series data sheet lists the G profile as 2.4 GHz channels 1-13 and the 5.745-5.825 GHz upper block. Cisco lists the G profile with an upper 5 GHz block and no lower or middle 5 GHz block. This changes available channel count and makes destination-specific capacity validation important.

Use an upper-band-specific commissioning checklist. Confirm controller country, available channel list and post-install utilization before accepting a design that was sized using another domain. Regulatory-domain letters are identifiers, not country names; use Cisco's compliance tool for the actual deployment country and retain the lookup date.

Procurement inference: the listed upper-only 5 GHz choice makes channel reuse and client compatibility central to acceptance. Record the client mix used during testing and verify association on approved upper-block channels. If the site's earlier survey relied on lower or DFS middle channels, the design requires revision rather than a simple model substitution, even when antenna architecture and controller family remain unchanged.

Deployment evidence worksheet

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory.

Mechanical installation record

List the bracket, ceiling or wall interface, enclosure requirement, safety restraint, service clearance and cable-entry plan before scheduling installation. Receiving should identify missing mechanical items before the access point reaches site. Photograph the mounted label and final cable entry, then record how the unit can be reached for replacement. A complete electronic order can still be an unusable deployment kit when mechanical dependencies are omitted.

Serial-level asset control

Capture chassis serial, base MAC address, carton reference, deployment site, controller assignment and asset owner. Reconcile the identifiers against the purchase line before activation. Multi-unit cartons require an entry for every physical access point; a carton SKU alone cannot show which unit was installed, held as a spare or returned. This record is also needed to trace support entitlement, replacement history and monitoring ownership.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a nearby Aironet 2802 line merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here.

Monitoring handover

Assign owners for AP reachability, controller join failures, radio utilization, client health and switch-port errors. Confirm that the exact serial appears in inventory and monitoring, then test the alert path. Record dashboard object, notification route and escalation owner. Telemetry that is not tied to an owned asset does not provide a reliable service baseline and will not support later comparison after channel or software changes.

Security baseline

Retain the approved controller policy, management authorization, certificate or trust workflow, client authentication test and logging destination. Confirm behavior on the deployed controller software instead of promising a protocol from the hardware family name. Remove temporary onboarding access and verify administrative reachability after handover. This keeps product identity separate from software-dependent security claims.

Fault-domain separation

Build the acceptance record so power, wired link, controller join, radio state, authentication and application reachability can be reviewed independently. Preserve timestamps and device identifiers across switch and controller logs. When a test fails, identify the failing boundary before replacing hardware. This avoids classifying a cable, policy or controller problem as an access-point defect and creates evidence that can be reused during support escalation.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard.

Related Aironet 2802 order records

• AIR-AP2802E-GK910C - compare antenna architecture and regulatory-domain evidence.
• AIR-AP2802E-G-K9C - compare antenna architecture and regulatory-domain evidence.
• AIR-AP2802E-G-K9 - compare antenna architecture and regulatory-domain evidence.

Official evidence: Cisco Aironet 2800 Series data sheet; Cisco 2800 Series getting started guide; Cisco 2800 Series support and lifecycle page; and Cisco wireless compliance tool.