Home Products Brands Solutions News ITAD About Us

AIR-AP2802I-EK910C Cisco Aironet 2800i 4x4 MU-MIMO Eco-pack 10 APs product image

AIR-AP2802I-EK910C Cisco Aironet 2800i 4x4 MU-MIMO Eco-pack 10 APs

Technical Support Enquiries

Confirm scope and response arrangements

763 412 7282
+86 010 69614620

AIR-AP2802I-EK910C Overview

AIR-AP2802I-EK910C Is a Ten-AP Eco-Pack

AIR-AP2802I-EK910C is not a single access point. Cisco lists the AIR-AP2802I-xK910C format as a configurable eco-pack containing ten dual-band Aironet 2802i units. The I identifies integrated antennas, while E is the regulatory-domain code that must be approved for the destination country.

Radio and Network Interfaces

The 2802i platform provides 4x4 MU-MIMO with three spatial streams for 802.11ac Wave 2. Cisco documents two autosensing Gigabit Ethernet interfaces, an RJ45 management console and internal antennas. Controller and software support must be checked against the existing WLAN before replacing an installed access point.

Power and Receiving Checks

Full-feature operation uses 802.3at PoE+ or Cisco UPOE. Cisco lists 22.5 W at the power-sourcing equipment with USB disabled and 26.5 W with USB enabled. On receipt, verify that the shipment contains ten units and that required mounting brackets, injectors and licenses are included in the quotation.

Cisco Aironet 2800 official support resources

AIR-AP2802I-EK910C Specification

Exact model / SKU	AIR-AP2802I-EK910C
Package identity	Eco-pack of 10 Aironet 2802i access points
Antenna	Internal
Wireless profile	802.11ac Wave 2, 4x4 MU-MIMO, three spatial streams
Ethernet	2 x 10/100/1000BASE-T
Power	802.3at PoE+ or Cisco UPOE for full operation
Regulatory domain	E; country approval required
Source match	Cisco Aironet 2800 official ordering and platform documentation
Official manufacturer reference	Cisco Aironet 2800 official support resources

Datasheet series	Cisco Aironet 2800 Series Access Points
Exact model	AIR-AP2802I-EK910C
Wireless role	Enterprise indoor/outdoor access point; confirm antenna, regulatory domain and mounting requirement
Wireless generation	802.11ac enterprise access point family; confirm regulatory domain, controller support and deployment mode
Power requirement	Confirm PoE standard, injector or power adapter requirement before purchase
Deployment check	Confirm controller/cloud management compatibility, country domain, mounting kit and license requirement
Official datasheet	Cisco Aironet 2800 Series Access Points official product page

Part numbers		Cisco Aironet 2800i Access Point Configurable: Indoor environments, with internal antennas
		● AIR-AP2802I-xK910C: Eco-pack (dual-band 802.11a/g/n/ac) 10 quantity access points, configurable
		Regulatory domains: (x = regulatory domain)
		Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country.
		Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List.
		Cisco Wireless LAN Services
		● AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service
		● AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service
		● AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service
Software		● Cisco Unified Wireless Network Software Release 8.2.111.0 or later
Software		● Cisco IOS ® XE Software Release 16.3
Supported wireless LAN controllers		● Cisco 2500 Series Wireless Controllers, Cisco 3500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex ® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 9800 Series Wireless Controllers, Cisco Virtual Wireless Controller
		● Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches
		● Cisco Mobility Express
802.11n version 2.0 (and related) capabilities		● 4x4 MIMO with three spatial streams
		● Maximal Ratio Combining (MRC)
		● 802.11n and 802.11a/g beamforming
		● 20- and 40-MHz channels
		● PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
		● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
		● 802.11 Dynamic Frequency Selection (DFS)
		● Cyclic Shift Diversity (CSD) support
802.11ac Wave 1 capabilities		● 4x4 MIMO with three spatial streams
		● MRC
		● 802.11ac beamforming
		● 20-, 40-, and 80-MHz channels
		● PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
		● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
		● 802.11 DFS
		● CSD support
802.11ac Wave 2 capabilities		● 4x4 MU-MIMO with three spatial streams
		● MRC
		● 802.11ac beamforming
		● 20-, 40-, 80, 160-MHz channels
		● PHY data rates up to 4680 Mbps
		● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
		● 802.11 DFS
		● CSD support
Integrated antenna		Flexible radio (either 2.4 GHz or 5 GHz)
		● 2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth
		● 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°
		Dedicated 5-GHz radio
		● 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth
Interfaces		● 2802I/E
		◦ 2x 100/1000BASE-T autosensing (RJ-45)
		● Management console port (RJ-45)
		● USB 2.0 (enabled via future software)
Indicators		● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)		● Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”
Weight		Cisco Aironet 2802i
Weight		● 3.53 lb (1.6 kg)
Input power requirements		● 802.3at PoE+, Cisco Universal PoE (Cisco UPOE ®)
Input power requirements		● 802.3at power injector (AIR-PWRINJ6=)
Power draw		● 22.5W at the PSE (20W at the PD) with all features enabled except for the USB 2.0 port
Power draw		● 26.5W at the PSE (23W at the PD) with the USB 2.0 port enabled
Environmental		Cisco Aironet 2802i
		● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
		● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
		● Operating temperature: 32° to 104°F (0° to 40°C)
		● Operating humidity: 10% to 90% (noncondensing)
		● Operating altitude test: 40˚C, 9843 ft.
System memory		● 1024 MB DRAM
System memory		● 256 MB flash
Warranty		Limited lifetime hardware warranty
Available transmit power settings		2.4 GHz			5 GHz
		● 23 dBm (200 mW)			● 23 dBm (200 mW)
		● 20 dBm (100 mW)			● 20 dBm (100 mW)
		● 17 dBm (50 mW)			● 17 dBm (50 mW)
		● 14 dBm (25 mW)			● 14 dBm (25 mW)
		● 11 dBm (12.5 mW)			● 11 dBm (12.5 mW)
		● 8 dBm (6.25 mW)			● 8 dBm (6.25 mW)
		● 5 dBm (3.13 mW)			● 5 dBm (3.13 mW)
		● 2 dBm (1.56 mW)			● 2 dBm (1.56 mW)
Frequency band and 20-MHz operating channels		A (A regulatory domain):			I (I regulatory domain):
		● 2.412 to 2.462 GHz; 11 channels			● 2.412 to 2.472 GHz; 13 channels
		● 5.180 to 5.320 GHz; 8 channels			● 5.180 to 5.320 GHz; 8 channels
		● 5.500 to 5.700 GHz; 8 channels			K (K regulatory domain):
		(excludes 5.600 to 5.640 GHz)			● 2.412 to 2.472 GHz; 13 channels
		● 5.745 to 5.825 GHz; 5 channels			● 5.180 to 5.320 GHz; 8 channels
		B (B regulatory domain):			● 5.500 to 5.620 GHz; 7 channels
		● 2.412 to 2.462 GHz; 11 channels			● 5.745 to 5.805 GHz; 4 channels
		● 5.180 to 5.320 GHz; 8 channels			N (N regulatory domain):
		● 5.500 to 5.720 GHz; 12 channels			● 2.412 to 2.462 GHz; 11 channels
		● 5.745 to 5.825 GHz; 5 channels			● 5.180 to 5.320 GHz; 8 channels
		C (C regulatory domain):			● 5.745 to 5.825 GHz; 5 channels
		● 2.412 to 2.472 GHz; 13 channels			Q (Q regulatory domain):
		● 5.745 to 5.825 GHz; 5 channels			● 2.412 to 2.472 GHz; 13 channels
		D (D regulatory domain):			● 5.180 to 5.320 GHz; 8 channels
		● 2.412 to 2.462 GHz; 11 channels			● 5.500 to 5.700 GHz; 11 channels
		● 5.180 to 5.320 GHz; 8 channels			R (R regulatory domain):
		● 5.745 to 5.825 GHz; 5 channels			● 2.412 to 2.472 GHz; 13 channels
		E (E regulatory domain):			● 5.180 to 5.320 GHz; 8 channels
		● 2.412 to 2.472 GHz; 13 channels			● 5.660 to 5,805 GHz; 7 channels
		● 5.180 to 5.320 GHz; 8 channels			S (S regulatory domain):
		● 5.500 to 5.700 GHz; 8 channels			● 2.412 to 2.472 GHz; 13 channels
		(excludes 5.600 to 5.640 GHz)			● 5.180 to 5.320 GHz; 8 channels
		F (F regulatory domain):			● 5.500 to 5.700 GHz;, 11 channels
		● 2.412 to 2.472 GHz; 13 channels			● 5.745 to 5.825 GHz; 5 channels
		● 5.250 to 5.350 GHz; 4 channels			T (T regulatory domain):
		● 5.725 to 5.825 GHz; 4 channels			● 2.412 to 2.462 GHz; 11 channels
		G (G regulatory domain):			● 5.280 to 5.320 GHz; 3 channels
		● 2.412 to 2.472 GHz; 13 channels			● 5.500 to 5.700 GHz; 8 channels
		● 5.745 to 5.825 GHz; 5 channels			(excludes 5.600 to 5.640 GHz)
		H (H regulatory domain):			● 5.745 to 5.825 GHz; 5 channels
		● 2.412 to 2.472 GHz; 13 channels			Z (Z regulatory domain):
		● 5.150 to 5.350 GHz; 8 channels			● 2.412 to 2.462 GHz; 11 channels
		● 5.745 to 5.825 GHz; 5 channels			● 5.180 to 5.320 GHz; 8 channels
					● 5.500 to 5.700 GHz; 8 channels
					(excludes 5.600 to 5.640 GHz)
					● 5.745 to 5.825 GHz; 5 channels
Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country.
Maximum number of nonoverlapping channels		2.4 GHz			5 GHz
		● 802.11b/g:			● 802.11a:
		◦ 20 MHz: 3			◦ 20 MHz: 25 FCC, 16 EU
		● 802.11n:			● 802.11n:
		◦ 20 MHz: 3			◦ 20 MHz: 25 FCC, 16 EU
					◦ 40 MHz: 12 FCC, 7 EU
					◦ 20 MHz: 25 FCC, 16 EU
					◦ 40 MHz: 12 FCC, 7 EU
					◦ 80 MHz: 6 FCC, 3 EU
					◦ 160 MHz 2 FCC, 1 EU
Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.
Compliance standards		◦ UL 60950-1
		◦ CAN/CSA-C22.2 No. 60950-1
		◦ UL 2043
		◦ IEC 60950-1
		◦ EN 60950-1
		◦ EN 50155 for 2800e (Operating temperature -20° to 50°C)
		● Radio approvals:
		◦ FCC Part 15.107, 15.109, 15.247, 15.407, 14-30
		◦ RSS-247 (Canada)
		◦ EN 300.328, EN 301.893 (Europe)
		◦ ARIB-STD 66 (Japan)
		◦ ARIB-STD T71 (Japan)
		◦ EMI and susceptibility (Class B)
		◦ ICES-003 (Canada)
		◦ VCCI (Japan)
		◦ EN 301.489-1 and -17 (Europe)
		◦ EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
		● IEEE standards:
		◦ IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d
		◦ IEEE 802.11ac
		● Security:
		◦ 802.11i, Wi-Fi Protected Access 3 (WPA3), WPA2, WPA
		◦ 802.1X
		◦ Advanced Encryption Standards (AES)
		● Extensible Authentication Protocol (EAP) types:
		◦ EAP-Transport Layer Security (TLS)
		◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MCSHAPv2)
		◦ Protected EAP (PEAP) v0 or EAP-MSCHAPv2
		◦ EAP-Flexible Authentication via Secure Tunneling (FAST)
		◦ PEAP v1 or EAP-Generic Token Card (GTC)
		◦ EAP-Subscriber Identity Module (SIM)
		● Multimedia:
		◦ Wi-Fi Multimedia (WMM)
		● Other:
		◦ FCC Bulletin OET-65C
		◦ RSS-102
Data rates supported		802.11b: 1, 2, 5.5, and 11 Mbps
		802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
		802.11n HT20: 6.5 to 216.7 Mbps (MCS0 to MCS23)
		802.11n HT40: 13.5 to 450 Mbps (MCS0 to MCS23)
		802.11ac VHT20: 6.5 to 288.9 Mbps (MCS0 to 8 – SS 1, MCS0 to 9 – SS 2 and 3)
		802.11ac VHT40: 13.5 to 600 Mbps (MCS0 to 9 – SS 1 to 3)
		802.11ac VHT80: 29.3 to 1300 Mbps (MCS0 to 9 – SS 1 to 3)
		802.11ac VHT160: 58.5 to 2304 Mbps (MCS0 to 9 – SS 1 and 2, MCS0 to 8 – SS 3)
Transmit power and receive sensitivity
Spatial streams		5-GHz radio		2.4-GHz flexible radio		5-GHz flexible radio
Spatial streams		Total Tx power (dBm)	Rx sensitivity (dBm)	Total Tx power (dBm)	Rx sensitivity (dBm)	Total Tx power (dBm)	Rx sensitivity (dBm)
802.11/11b
1 Mbps	1	NA	NA	23	-101	NA	NA
11 Mbps	1	NA	NA	23	-88	NA	NA
802.11a/g
6 Mbps	1	23	-93	23	-91	23	-92
24 Mbps	1	23	-89	23	-87	23	-89
54 Mbps	1	23	-81	23	-77	22	-80
802.11n HT20
MCS0	1	23	-93	23	-91	23	-93
MCS4	1	23	-88	23	-86	23	-87
MCS7	1	23	-79	23	-77	22	-78
MCS8	2	23	-93	23	-91	21	-93
MCS12	2	23	-86	23	-85	23	-86
MCS15	2	23	-79	23	-77	21	-78
MCS16	3	23	-93	23	-91	23	-92
MCS20	3	23	-85	23	-84	22	-84
MCS23	3	23	-78	23	-76	18	-77
802.11n HT40
MCS0	1	23	-90			23	-89
MCS4	1	23	-85			23	-84
MCS7	1	23	-76			23	-75
MCS8	2	23	-90			23	-89
MCS12	2	23	-83			23	-83
MCS15	2	23	-76			21	-76
MCS16	3	23	-90			23	-89
MCS20	3	23	-82			23	-81
MCS23	3	23	-75			20	-74
802.11ac VHT20
MCS0	1	23	-93			23	-92
MCS4	1	23	-88			23	-87
MCS7	1	23	-82			22	-80
MCS8	1	23	-77			21	-75
MCS0	2	23	-93			23	-91
MCS4	2	23	-86			23	-84
MCS7	2	23	-79			21	-77
MCS8	2	23	-75			20	-73
MCS9	2	NA	NA			NA	NA
MCS0	3	23	-93			23	-91
MCS4	3	23	-85			22	-83
MCS7	3	23	-78			20	-76
MCS8	3	23	-74			19	-72
MCS9	3	23	-72			18	-70
802.11ac VHT40
MCS0	1	23	-90			23	-89
MCS4	1	23	-85			23	-84
MCS7	1	23	-78			22	-77
MCS8	1	23	-75			21	-73
MCS9	1	23	-73			20	-72
MCS0	2	23	-90			23	-89
MCS4	2	23	-83			23	-82
MCS7	2	23	-76			21	-75
MCS8	2	23	-73			20	-72
MCS9	2	23	-71			19	-69
MCS0	3	23	-90			23	-89
MCS4	3	23	-82			23	-80
MCS7	3	23	-74			20	-73
MCS8	3	23	-70			19	-68
MCS9	3	23	-69			18	-67
802.11ac VHT80
MCS0	1	23	-87			23	-86
MCS4	1	23	-83			23	-81
MCS7	1	23	-76			22	-74
MCS8	1	23	-72			21	-70
MCS9	1	23	-69			20	-68
MCS0	2	23	-87			23	-86
MCS4	2	23	-80			23	-79
MCS7	2	23	-73			21	-72
MCS8	2	23	-69			20	-68
MCS9	2	23	-67			19	-66
MCS0	3	23	-87			23	-86
MCS4	3	23	-77			23	-77
MCS7	3	23	-72			20	-70
MCS8	3	23	-67			19	-66
MCS9	3	22	-65			18	-64
802.11ac VHT160
MCS0	1	23	-83			23	-83
MCS4	1	23	-78			23	-78
MCS7	1	23	-71			22	-71
MCS8	1	23	-67			21	-68
MCS9	1	23	-66			20	-66
MCS0	2	23	-83			23	-83
MCS4	2	23	-76			23	-76
MCS7	2	23	-69			21	-69
MCS8	2	23	-65			20	-66
MCS9	2	23	-63			19	-63
MCS0	3	23	-82			23	-83
MCS4	3	23	-74			22	-74
MCS7	3	23	-67			20	-68
MCS8	3	23	-62			19	-62

AIR-AP2802I-EK910C Warranty

	Product Quotation Confirm the exact configuration, quantity and quoted price before ordering		Condition and Packaging Confirm the supplied condition, packaging and product identification in the quotation
	Technical Support Enquiry Confirm support scope, provider, eligibility and any applicable charges before purchase		Returns and Replacement Request return or replacement instructions before sending equipment; approval depends on the applicable order terms
	Shipping Arrangements Confirm the carrier, shipping charges, destination restrictions and estimated dispatch date in the quotation		Warranty Terms Confirm the warranty provider, duration, coverage and exclusions for the exact supplied item; no brand-wide warranty is implied

AIR-AP2802I-EK910C FAQ

What is AIR-AP2802I-EK910C?

AIR-AP2802I-EK910C Cisco Aironet 2800i 4x4 MU-MIMO Eco-pack 10 APs is a CISCO Aironet 2800 Series Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.

What wireless or client capacity is listed for AIR-AP2802I-EK910C?

For AIR-AP2802I-EK910C, the manufacturer specification lists antenna as Internal.

What interfaces and ports does AIR-AP2802I-EK910C provide?

For AIR-AP2802I-EK910C, the manufacturer specification lists ethernet as 2 x 10/100/1000BASE-T.

What are the power requirements for AIR-AP2802I-EK910C?

For AIR-AP2802I-EK910C, the manufacturer specification lists power as 802.3at PoE+ or Cisco UPOE for full operation.

Is AIR-AP2802I-EK910C available from YYST Global?

Contact YYST Global to confirm availability for AIR-AP2802I-EK910C, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.

Related AIR-AP2802I-EK910C

AIR-AP2802I-E-K9

Cisco AIR-AP2802I-E-K9 Aironet 2802i E-Domain Indoor Access Point

AIR-AP2802I-E-K9 is the E-domain, controller-based Cisco Aironet 2802i indoor access point. It uses integrated antennas, 802.11ac Wave 2 radios and two Gigabit Ethernet interfaces; it is not a Catalyst 9100 model.

CISCO Cisco Aironet 2800 Series Access Points

AIR-AP2802I-Z-K9C

Cisco AIR-AP2802I-Z-K9C Configurable Aironet 2802i Access Point

AIR-AP2802I-Z-K9C identifies a configurable Aironet 2802i order with the Z regulatory-domain token. It is an indoor, internal-antenna access point with two Gigabit Ethernet connections, not a Catalyst 9100.

CISCO Cisco Aironet 2800 Series Access Points

AIR-AP2802I-D-K9I

Cisco AIR-AP2802I-D-K9I Aironet 2802i India-Only Access Point

Cisco identifies AIR-AP2802I-D-K9I as an India-only, controller-based Aironet 2802i order. This indoor access point has internal antennas; retain the final K9I suffix when checking the supplied product.

CISCO Cisco Aironet 2800 Series Access Points

AIR-AP2802I-H-K9

Cisco AIR-AP2802I-H-K9 Aironet Wireless Access Point

AIR-AP2802I-H-K9 is a Cisco Aironet 2802i controller-based indoor access point for the H regulatory domain. It uses internal antennas, supports 802.11ac Wave 2 with 4x4 MU-MIMO and three spatial streams, and provides two Gigabit Ethernet interfaces.

CISCO Cisco Aironet 2800 Series Access Points

AIR-AP2802I-A-K9

AIR-AP2802I-A-K9 Cisco Aironet 2800i Dual-band Access Point

AIR-AP2802I-A-K9 is a 2802I indoor access point with integrated antennas supplied as a single-unit, fixed regulatory-domain order with regulatory-domain token A. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.

CISCO Cisco Aironet 2800 Series Access Points

AIR-AP2802I-C-K9

AIR-AP2802I-C-K9 Cisco Aironet 2800i 802.11ac Wave 2 Access Point

AIR-AP2802I-C-K9 is a 2802I indoor access point with integrated antennas supplied as a single-unit, fixed regulatory-domain order with regulatory-domain token C. Cisco lists its channel profile as 2.4 GHz channels 1-13 and the 5.745-5.825 GHz upper block. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.

CISCO Cisco Aironet 2800 Series Access Points

AIR-AP2802E-A-K9

AIR-AP2802E-A-K9 Cisco Aironet 2800e Dual-band 802.11a/g/n/ac AP

AIR-AP2802E-A-K9 is a 2802E indoor access point for external antennas supplied as a single-unit, fixed regulatory-domain order with regulatory-domain token A. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.

CISCO Cisco Aironet 2800 Series Access Points

AIR-AP2802E-A-K9C

AIR-AP2802E-A-K9C Cisco Aironet 2800e 802.11ac Wave 2 Access Point

AIR-AP2802E-A-K9C is a 2802E indoor access point for external antennas supplied as a single-unit, configurable order with regulatory-domain token A. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.

CISCO Cisco Aironet 2800 Series Access Points