AIR-AP1815W-N-K9C Cisco 1815W Dual-band WiFi 5 Mobility Express AP

AIR-AP1815W-N-K9C exact wall-plate order

AIR-AP1815W-N-K9C is a compact Cisco Aironet 1815w access point for wall or junction-box installation in hospitality, residence and multi-dwelling environments. It supports concurrent 2.4-GHz and 5-GHz 2x2 radios with two spatial streams and integrated antennas.

Software order boundary

Cisco defines AIR-AP1815W-x-K9C as the order whose default software option is Mobility Express. Used inventory may have been reimaged, so preserve running software, current role, configuration backup and recovery evidence.

N regulatory evidence

The domain letter is an ordering identifier, not a country name. For the N-domain order, retain both destination approval and controller evidence before moving the unit from staging to production.

Use the staging-to-production handoff as the N-domain checkpoint. The staging record should contain destination approval, complete PID, serial and controller country; the production owner must accept those same fields. If the AP is moved between managed sites, close the first assignment and create a new reviewed destination record instead of merely changing the location field.

Room-side Ethernet and PoE boundary

The 1815w provides one Gigabit uplink, three local Gigabit Ethernet ports and one passive RJ-45 pass-through path. LAN 1 can provide 802.3af Class 0 PoE-out only when the AP itself receives 802.3at; there is no PoE output when the AP receives 802.3af.

Mounting and antenna boundary

The unit uses integrated dual-band antennas with approximately 2 dBi peak gain at 2.4 GHz and 3 dBi at 5 GHz. It installs vertically with AIR-AP-BRACKET-W3; AIR-AP1815W-KIT is a separate spacer and RJ-45 jumper option when the cabling path requires it.

Lifecycle decision

Cisco lists the Aironet 1815 family as end of sale, publishes 2027-04-30 as the last support date and identifies the Catalyst 9105AX Series as the migration family. Existing stock does not extend that support date.

Room deployment evidence worksheet

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. Record whether the AP receives 802.3af or 802.3at and whether LAN 1 PoE-out is expected.

Mechanical installation record

List the bracket, ceiling or wall interface, enclosure requirement, safety restraint, service clearance and cable-entry plan before scheduling installation. Receiving should identify missing mechanical items before the access point reaches site. Photograph the mounted label and final cable entry, then record how the unit can be reached for replacement. A complete electronic order can still be an unusable deployment kit when mechanical dependencies are omitted. Reconcile AIR-AP-BRACKET-W3, the Torx screw and any AIR-AP1815W-KIT spacer or jumper.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Save a dated Cisco compliance lookup; successful radio operation does not establish country approval.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a nearby Aironet 1815w line merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here. A changed domain letter or K9/K9C suffix is a different 1815w procurement identity.

Software lifecycle file

Record the controller release approved for this unit, the source used to verify support, the last tested date and the owner for software advisories. Available hardware does not prove compatibility with a current or future controller train. Review Cisco support information before every expansion or replacement. The lifecycle file should also state when this Aironet 1815w generation must leave service and which surrounding dependencies need migration. Apply the 1815 Series lifecycle to software, support and Catalyst 9105AX migration planning.

Roaming acceptance

Define the neighboring access points and client types used for roaming validation. Record handoff behavior, interruption observed, authentication result and controller events along the intended movement path. Compare the outcome with the site's design target rather than declaring success from static association. Where this unit replaces an older AP, test both entry and exit from its cell so a local improvement does not hide a boundary problem. Document roaming from the room cell into neighboring coverage with client and controller events.

Operational log retention

Store the initial controller events, switch-port state, radio assignment, channel list and client test results with a consistent asset identifier. Define how long commissioning evidence is retained and who can retrieve it. A later firmware, controller or RF change should add a new dated observation rather than overwrite the original. The resulting history supports lifecycle decisions and distinguishes a new regression from the accepted baseline. Keep the first accepted wireless, wired, power and client results as the operational baseline.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard. Handover should include PID, serial, room, compliance result, software role, cabling and lifecycle owner.

Related Aironet 1815w order records

• AIR-AP1815W-N-K9 - compare software order and regulatory-domain evidence.
• AIR-AP1815W-I-K9 - compare software order and regulatory-domain evidence.
• AIR-AP1815W-Z-K9 - compare software order and regulatory-domain evidence.

Official evidence: Cisco Aironet 1815w data sheet; Cisco 1815w getting-started guide; Cisco wall-plate deployment guide; Cisco 1815 lifecycle bulletin; and Cisco compliance lookup.