AIR-AP1815W-B-K9 Cisco Aironet 1815W Wi-Fi 5 Wave 2 Access Point

AIR-AP1815W-B-K9 exact wall-plate order

AIR-AP1815W-B-K9 is a compact Cisco Aironet 1815w access point for wall or junction-box installation in hospitality, residence and multi-dwelling environments. It supports concurrent 2.4-GHz and 5-GHz 2x2 radios with two spatial streams and integrated antennas.

Software order boundary

Cisco defines AIR-AP1815W-x-K9 as the dual-band controller-based 802.11ac Wave 2 order. Record the target WLC, supported release, discovery path, entitlement and successful CAPWAP join.

B regulatory evidence

The domain letter is an ordering identifier, not a country name. Match the B-domain carton label to the purchase line before serial assignment, then archive the dated compliance lookup.

Build the B-domain record around quotation-to-asset traceability. Preserve the authorized line, received label, chassis serial, assigned site and reviewer as one chain. If the controller later moves to another country configuration, open a new approval event rather than overwriting the original evidence; the history should explain both the purchased identity and every deployment decision.

Room-side Ethernet and PoE boundary

The 1815w provides one Gigabit uplink, three local Gigabit Ethernet ports and one passive RJ-45 pass-through path. LAN 1 can provide 802.3af Class 0 PoE-out only when the AP itself receives 802.3at; there is no PoE output when the AP receives 802.3af.

Mounting and antenna boundary

The unit uses integrated dual-band antennas with approximately 2 dBi peak gain at 2.4 GHz and 3 dBi at 5 GHz. It installs vertically with AIR-AP-BRACKET-W3; AIR-AP1815W-KIT is a separate spacer and RJ-45 jumper option when the cabling path requires it.

Lifecycle decision

Cisco lists the Aironet 1815 family as end of sale, publishes 2027-04-30 as the last support date and identifies the Catalyst 9105AX Series as the migration family. Existing stock does not extend that support date.

Room deployment evidence worksheet

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Save a dated Cisco compliance lookup; successful radio operation does not establish country approval.

Controlled spare policy

If purchased as a spare, name the protected site population, compatible controller image, storage location, storage conditions and periodic power-on test. Confirm that regulatory token, antenna architecture and mounting parts match the population it protects. Set a final-use review date. A stored unit can become unsuitable while untouched because controller software, country approval, certificates or network architecture may change. Prove a spare against the protected controller or Mobility Express image, bracket, PoE and port design.

Authentication path test

Commission representative clients through association, authentication, address assignment, DNS and application reachability. Preserve the identity policy used, test client type, result and relevant controller logs. An access point that joins its controller has not yet demonstrated the user path. Repeat the test after any controller, certificate or authentication-service change and retain failures separately from RF or switch-port evidence. Test wireless clients and every occupied local wired port through authentication and application access.

Roaming acceptance

Define the neighboring access points and client types used for roaming validation. Record handoff behavior, interruption observed, authentication result and controller events along the intended movement path. Compare the outcome with the site's design target rather than declaring success from static association. Where this unit replaces an older AP, test both entry and exit from its cell so a local improvement does not hide a boundary problem. Document roaming from the room cell into neighboring coverage with client and controller events.

Change-window controls

Document staging evidence, production window, installer, rollback owner and measurable success criteria. Preserve the prior controller or AP state needed for recovery. After the change, close temporary credentials, compare authentication, monitoring and RF results with the approved baseline, and record the final decision. The work is not complete merely because the unit powers on or appears in a controller list. Rollback must restore controller role, country setting, switch port, room cabling and prior RF service.

Replacement dependency map

Map this unit to controller, licenses, authentication services, switch power, cable, bracket, antenna design and monitoring objects. For an end-of-sale platform, state which dependencies can be reused by the planned Catalyst migration and which require change. A nominal access-point replacement can fail when the surrounding platform was never inventoried. Keep the map with the asset rather than only in a one-time project file. Compare the Catalyst 9105AX migration with wall mounting, ports, PoE-out, software and coverage needs.

Receiving inspection

At receipt, compare model label, regulatory token, antenna form, quantity, serials and visible condition with the authorized order. Photograph labels before cartons are separated. Quarantine shortages, mixed units, damaged connectors or unapproved substitutions. Do not rely on a distributor description as evidence that the exact Cisco order arrived. Close the inspection only when every physical unit is accounted for. Receiving must identify the wall-plate 1815w and distinguish K9 from K9C before staging.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard. Handover should include PID, serial, room, compliance result, software role, cabling and lifecycle owner.

Related Aironet 1815w order records

• AIR-AP1815W-B-K9C - compare software order and regulatory-domain evidence.
• AIR-AP1815W-Z-K9C - compare software order and regulatory-domain evidence.
• AIR-AP1815W-Q-K9C - compare software order and regulatory-domain evidence.

Official evidence: Cisco Aironet 1815w data sheet; Cisco 1815w getting-started guide; Cisco wall-plate deployment guide; Cisco 1815 lifecycle bulletin; and Cisco compliance lookup.