AIR-ANT2547V-N is Cisco's direct-mount outdoor dual-band omnidirectional antenna for compatible Aironet outdoor access points. It covers 2400-2483 MHz and 5150-5875 MHz with 4 dBi and 7 dBi gain.
The H-plane is omnidirectional, while Cisco lists 30-degree elevation beamwidth at 2.4 GHz and 14 degrees at 5 GHz. Mounting beside a wall or tower can distort that pattern, so the radiating element needs lateral clearance.
The antenna has an N-male connector and no attached coax cable. It mounts to a compatible AP port. Confirm port gender, supported band, antenna count and regulatory approval; an N-type adapter does not make an unsupported AP design valid.
Cisco rates the antenna IP66/IP67, -40 to 85 C, 100 mph operational wind and 165 mph survival wind. Seal the outdoor connector with approved coax seal and account for structural and lightning-protection requirements.
Inspect the 11.1-inch radome, N connector, gasket and label. Confirm how many antennas the access point requires and preserve separation/orientation specified by its installation guide.
Official evidence: Cisco AIR-ANT2547V-N specifications and mounting guide.
| Exact model / SKU | AIR-ANT2547V-N |
| Antenna form | Outdoor dual-band direct-mount omnidirectional collinear array |
| Frequency ranges | 2400-2483 MHz and 5150-5875 MHz |
| Gain | 4 dBi at 2.4 GHz; 7 dBi at 5 GHz |
| Elevation beamwidth | 30 degrees at 2.4 GHz; 14 degrees at 5 GHz |
| Connector | N-male direct mount; no cable |
| Environmental rating | IP66/IP67; -40 to 85 C |
| Wind rating | 100 mph operational; 165 mph survival |
| Receiving gate | Inspect radome, N connector/seal and verify AP antenna count |
| Source match | AIR-ANT2547V-N: exact Cisco antenna band, pattern, gain, connector, environment and compatibility verified |
| Official manufacturer reference | Cisco AIR-ANT2547V-N official guide |
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
Cisco AIR-ANT2547V-N Antenna is a CISCO accessory or component in the Antenna 2.4 5 5.8 GHz category. It may require a compatible main device and should not be treated as a complete standalone system.
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
Please request a quote for AIR-ANT2547V-N. Final pricing depends on stock, quantity, configuration and delivery destination.
Related products

AIR-ANT2566P4W-RS is a self-identifying four-element patch antenna with 6 dBi gain in both 2.4 and 5 GHz bands. It is not a WLAN controller.

AIR-ANT2524DW-R is the white, non-self-identifying dual-band dipole antenna. Cisco lists 2 dBi gain at 2.4 GHz and 4 dBi at 5 GHz.

AIR-ANT2524V4C-R is a four-element indoor ceiling antenna for 2.4 and 5 GHz MIMO radios. Cisco specifies 2 dBi and 4 dBi peak gain respectively.

Cisco AIR-ANT2506 is a 5.2 dBi omnidirectional mast-mount antenna for 2.4 GHz WLAN radios with an RP-TNC connection. It is suitable for indoor or outdoor installation.

Cisco AIR-ANT2524DW-RS is a white indoor dual-band antenna with self-identification circuitry, 2 dBi gain at 2.4 GHz and 4 dBi at 5 GHz. It is an antenna accessory, not an access point.

AIR-ANT24120 is a 12 dBi omnidirectional mast-mount antenna for compatible 2.4 GHz Aironet radios using RP-TNC. It is an antenna, not a WLAN controller.

AIR-ANT2422DW-R is an indoor articulated dipole for 2.4 GHz Cisco Aironet radios with an RP-TNC connector. It is not an AP or controller.

AIR-ANT2410Y-R is a six-element directional Yagi antenna with 10 dBi gain for compatible 2.4 GHz Aironet radios. Its cable terminates in an RP-TNC plug.