Cisco specifies an RP-TNC plug and indoor operation for AIR-ANT2422DW-R. Its technical table lists 2402–2495 MHz. The guide explicitly warns against connecting this antenna to a 5 GHz radio connector.
The base rotates through 360 degrees at the connection and adjusts from zero to 90 degrees at the knuckle. Cisco describes linear vertical polarization and an omnidirectional horizontal pattern. Follow the hand-tight connection procedure in the installation guide.
The official introduction calls this a 2.2 dBi antenna while its specification table gives 2 dBi peak gain. This listing does not silently choose a value for link-budget acceptance. Confirm the supplied revision and applicable specification before a gain-sensitive substitution.
Record the existing radio model, antenna-port band and exact part number. Specify condition and any commercial warranty separately; an archived technical guide does not confirm present stock or support entitlement.
Cisco exact-model dipole guide, including the differing gain entries
| Code | AIR-ANT2422DW-R |
|---|---|
| Design | Articulated dipole; indoor |
| Table frequency range | 2402–2495 MHz |
| Connector | RP-TNC plug |
| Gain evidence | Introduction: 2.2 dBi; specification table: 2 dBi. Confirm applicable revision. |
| Radio restriction | 2.4 GHz; do not use a 5 GHz antenna port |
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
Cisco AIR-ANT2422DW-R Indoor 2.4 GHz Articulated Dipole Antenna is a CISCO accessory or component in the Antenna 2.4 5 5.8 GHz category. It may require a compatible main device and should not be treated as a complete standalone system.
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
Please request a quote for AIR-ANT2422DW-R. Final pricing depends on stock, quantity, configuration and delivery destination.
Related products

AIR-ANT2422DG-R is a Cisco Aironet fixed straight gray dipole for 2.4 to 2.5 GHz, rated 2.2 dBi nominal (Cisco technical table lists 2 dBi peak), using RP-TNC plug. It is an antenna only; no access point or radio is included.

AIR-ANT2422DB-R is a legacy black swivel dipole antenna for 2.4 GHz Cisco Aironet radios. Cisco specifies 2.2 dBi gain and an RP-TNC connector.

AIR-ANT2422SDW-R is a very short white indoor 2.4 GHz omnidirectional antenna with 2.5 dBi peak gain and an RP-TNC connector. It measures 1.7 inches long.

AIR-ANT24120 is a 12 dBi omnidirectional mast-mount antenna for compatible 2.4 GHz Aironet radios using RP-TNC. It is an antenna, not a WLAN controller.

AIR-ANT2410Y-R is a six-element directional Yagi antenna with 10 dBi gain for compatible 2.4 GHz Aironet radios. Its cable terminates in an RP-TNC plug.

AIR-ANT2485P-R is an indoor/outdoor 8.5 dBi single patch antenna covering 2400–2484 MHz, with an RP-TNC connection. It does not include a WLAN radio.

Cisco AIR-ANT2465P-R is a 2.4 GHz diversity patch antenna with 6.5 dBi peak gain, vertical polarization and RP-TNC connections. It differs from the single-patch AIR-ANT2460P-R.

AIR-ANT2414S-R is a Cisco outdoor 2.4 GHz sector antenna with 90-degree azimuth coverage. Its specified 14 dBi gain includes the supplied 1.5 m cable.